BSOD Only when Gaming

[Lordbob75]

not after putting it to default... right now it's on normal... should I ?

Your RAM needs to run at 1.65V, not default.

~Lordbob

thats what it's at, and sorry I used the wrong term... I meant I had put it back to how it was stock.

Ok good. Does it still crash on Prime95? Try running medium FFTs

~Lordbob

 

[Ebrech]

medium FFT crash as well it's a matter of minutes 3 or less
I did the benchmark for it though is that any good XD

 

[Lordbob75]

Definitely an issue with the processor. Try bumping the CPU voltage up little by little and STOP if you get to 1.2v

~Lordbob

 

[Ebrech]

Definitely an issue with the processor. Try bumping the CPU voltage up little by little and STOP if you get to 1.2v

~Lordbob

I don't understand..I had it to 1.25 just now so what do you mean ? with 1.2v on what?

 

[Lordbob75]

Definitely an issue with the processor. Try bumping the CPU voltage up little by little and STOP if you get to 1.2v

~Lordbob

I don't understand..I had it to 1.25 just now so what do you mean ? with 1.2v on what?

Sorry, stop at 1.35V

~Lordbob

 

[Ebrech]

ok we put it at 1.2 so pretty much a downgrade right and so far fft has pass the 3rd test and no crash...thats already something... could lower voltage be better in this case? we are going to try playing the game and see what happen...

not sure if that means anything


V24OptionsConverted=1
MinTortureFFT=8
MaxTortureFFT=16
TortureMem=8
TortureTime=15
WGUID_version=2
StressTester=1
UsePrimenet=0
Left=75
Top=75
Right=1515
Bottom=835
W1=0 0 1918 108 0 -1 -1 -1 -1
W2=0 108 1918 217 0 -1 -1 -8 -30
W3=0 217 1918 325 0 -1 -1 -1 -1
W4=0 325 1918 434 0 -1 -1 -1 -1
W5=0 434 1918 542 0 -1 -1 -1 -1
W6=0 542 1918 651 0 -1 -1 -1 -1
W7=0 651 1918 759 0 -1 -1 -1 -1
W8=0 759 1918 868 0 -1 -1 -1 -1
W9=0 868 1918 977 0 -1 -1 -1 -1

[PrimeNet]
Debug=0

 

[Lordbob75]

ok we put it at 1.2 so pretty much a downgrade right and so far fft has pass the 3rd test and no crash...thats already something... could lower voltage be better in this case? we are going to try playing the game and see what happen...

I don't know if you are running the CPU at stock speeds at not, but what seemed to be happening was that the CPU is not getting enough voltage to run properly. Bumping up the voltage should cause it to be stable and fix the issues you were having.

~Lordbob

 

[Ebrech]

weird at 1.2v it's not crashing..well for now.. been 3 hours we will see i'll report tomorrow again

 

[Ebrech]

no crash today at all... what could possibly explain this ? a lower CPU voltage than normal would have fix our problem?

 

[Lordbob75]

no crash today at all... what could possibly explain this ? a lower CPU voltage than normal would have fix our problem?

Could just be a weird CPU I suppose...

~Lordbob

 

[Ebrech]

Does Weird necessarily means bad?

 

[Lordbob75]

Does Weird necessarily means bad?

Well in this case, it might mean the CPU is bad, but it's unfortunately hard to tell at this point.

That's really my only guess at this point, besides maybe a bad motherboard. You could try RMAing the CPU and replace it, which would fix the problem if it is the CPU.

Since you didn't have any crashes today, run a Prime95 blend test for a while and see what happens.

~Lordbob

 

[Ebrech]

everything is fine still no crashes I had no time to really test it with prime but it's as if the problem never been there...