Solved BSOD (page fault)after login and runs fine in safemode

necrovamp

New member
Local time
4:04 PM
Messages
2
I am getting BSOD constantly.
This started happening after I took apart my computer, installed a new cpu fan, and put it back together.
I have tried lots of things, so far no luck.
I am attaching my win7 SF diagnostic files, which has all the minidumps in it.

The bluescreen at the beginning was always
PAGE_FAULT_IN_NONPAGED_AREA, but I also get alot of
MEMORY_MANAGEMENT now as well.
It does not happen before I login, or while I'm in safe mode.

I ran memtest86+ and windows mem diagnostic, no problems there
I'm pretty sure my hard drives are fine.
I've tried disabling all startup services and programs, it seems to help a little, but I eventually bluescreen while using the computer.
At this point the only thing I assume it could be if not fault hardware, is a driver problem.
After I ran out of ideas, I started looking up things and found driver verifier, I turned that on and well, instantly bluescreen after logging in, lol, however I have not been able to make sense of any of the minidumps.

I was going to update my system drivers, especially my chipset driver, but while I was trying things, I saw that the windows installer service doesn't run in safemode, which might be what some of my drivers use, so I wanted to ask here first.

Please save me, lol

Ps. I just realized that the latest 3 or 4 dumps had driver verifier on Microsoft as well...I am currently running a non Microsoft driver verifier test..I will post the result asap




*New info* I may have fixed my problem, will mark this solved and post reasoni f I don't get a bluescreen in the next 24 hours

*edit* problem is solved
When I built my computer, I overclocked it ot 3.9 gigs, and found out that the max was 4.2 gigs
When I took out the cpu and put it back in while replacing the cooler, my motherboard thought it was a new cpu.
It kept my overclock settings, but for some reason enabled turbo mode.
I was already at 3.9 and turbo mode pushed it to around 4.4, with extra voltage.
I simply disabled turbo mode, and well....problem solved
Heh, its always something simple, that I make super complicated when my computer messes up.
 
Last edited:

My Computer My Computer

At a glance

Win 7 x64
OS
Win 7 x64
Welcome to the forum,.
Sorry that you did not receive any response on your problem but thanks for letting us know what you found out.
 

My Computer My Computer

At a glance

Windows 10 Home 64BitIntel Core i5 10400 @ 2.90GHz8.00GB Single-Channel Unknown @ 1329MHz (16-2...
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Self assembled
OS
Windows 10 Home 64Bit
CPU
Intel Core i5 10400 @ 2.90GHz
Motherboard
Intel Corporation DG41WV (PROCESSOR)
Memory
8.00GB Single-Channel Unknown @ 1329MHz (16-20-20-38)
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
DELL E170S
Screen Resolution
1280x1024 pixels
Hard Drives
931GB TOSHIBA DT01ACA100 (SATA)
238GB TEAM TM8PS7256G (SATA SSD)
Case
Nothing Fancy
Cooling
Fans
Keyboard
A4 Tech Co LTD
Mouse
A4 Tech Co Ltd/Logitech
Internet Speed
25 Mbps
Back
Top