BSOD playing GW2 and Tera error 116

[Duranox]

To answer Pauly, i've uninstalled Daemon Tools, reinstalled DirectX, did memtest, 7 passes and the only stress test was with OCCT.

 

[x BlueRobot]

Have you used the command?

sfc /scannow

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

:info: Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.

Check for any file system errors and bad sectors using Option #2 of:

• http://www.sevenforums.com/tutorials/433-disk-check.html

Use this command with Disk Check:

chkdsk C: /f /r

 

[Duranox]

Here are SS of CrystalDiskInfo, i've also ran Disk Check on both drives with no errors. The only thing i haven't done is Hard Drive Diagnostic Procedure since my knowledge about computers isn't the best and it seems to advanced to for me

 

[Dave76]

It's easy, download the program from WD, read the short tutorial.

Run the WD Lifeguard test on your HDD(s). Quick Test first, if it passes then run the Extended Test.
Data Lifeguard Diagnostic for Windows

How to test a drive for problems using Windows Data Lifeguard Diagnostics.*

 

[Duranox]

whenever i try to complete the quick test i get an error.

Status code = 00 (No error or no test ever run),
Failure Checkpoint = 00(Unknown Test) SMART self-test did not complete drive 1!

It only affects the C disk

 

[Duranox]

I assume i shouldn't run an extended test on C since it seems to be some sort of error when i try to run a quick test on it.

 

[x BlueRobot]

For now, try using this command:

sfc /scannow

Start rb: > Type: cmd > Right-Click > Run As Administrator > Enter Command > Press Enter

 

[Duranox]

tried that no errors or problems

 

[x BlueRobot]

Have you completed the Seagate Tools for Windows?

 

[Dave76]

I assume i shouldn't run an extended test on C since it seems to be some sort of error when i try to run a quick test on it.

Don't run the hard drive tests on your SSD.

OCZ should have a 'toolbox' program to check for problems with your SSD.
If you don't have it, check the OCZ support site, run the diagnostic program and post the results.

 

[Duranox]

I ran the extended test with Windows Data Lifeguard Diagnostics on C no problems came up

 

[x BlueRobot]

Do you have the latest graphics card drivers?

 

[Duranox]

310.90, yes. i prefer not to use the beta drivers

 

[x BlueRobot]

Are those the WHQL certified drivers?

 

[Duranox]

Yes

 

[x BlueRobot]

Check for any driver and program compatibility issues:

• Windows 7 Upgrade Advisor - Download - Microsoft Windows

 

[Duranox]

ran Upgrade Advisor a few times no problems showing

 

[x BlueRobot]

Okay that's good, run Furmark for about a hour, and then post back the results:

• http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

:warn:Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

 

[Duranox]

Here, i assume these are the test results

 

[x BlueRobot]

Everything seems to be okay, have you had any other BSODs recently?