Solved BSOD STOP error ntfs & ntoskrnl

[MvdB]

They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?

Strange, what does it say when you try to install it?
It is true you doe not have a raid setup... but it still needs a Serial ATA driver that comes with your board...

 

[Deman]

They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?

Strange, what does it say when you try to install it?
It is true you doe not have a raid setup... but it still needs a Serial ATA driver that comes with your board...

Well it just install and than says you dont reach the required minimum.

And the driver name says Intel SATA RAID Driver. So I guess there is no non raid driver?

 

[MvdB]

They aren't I tryed them, I installed all the drivers for the correct motherboard but the sata one doesnt works.

Edit: Wait I'll reboot pc. Nope, reboot didn't fix it. It keeps saying I don't have the minimum requirements. What are the minimum? :'(

Anyway, should I resort to the pre driver? Maybe the pre driver is needed for the normal one.
Do I even have sata raid? In device management I see my HDD as an ata.
According to my dad I don't have a raid setup, it'll be in the future though because I have two 1tb hdd's. But I first wanna solve the bsod before I put the next one in.
So I guess I should update the hdd firmware?

OK, just to be sure, try the other one... if that does not work, check what exact driver came on the disc with your mobo...

 

[Deman]

I'll do the firmware update this evening when I'm back from work, it requires you to make a dos thingy and update it from there or whatever.
And when I check the mobo disc it doesn't show in the autorun menu. However when I check the disc itself I do find some AHCI drivers I guess I need those? They are in the folder MSM but when I try to install it I get the same not meeting the minimum requirements.
However, there is another driver but that is about marvell. Do I have marvell? No clue what it is
This is the list I can choose out, maybe one of these is the needed one.

1)Intel Matrix Storage driver for 32bit system
2)Intel Matrix Storage driver for 64bit system
3)GIGABYTE GSATA driver for 32bit system
4)GIGABYTE GSATA driver for 64bit system
5)Marvell AHCI driver for 32bit system
6)Marvell AHCI driver for 64bit system
7)Intel Rapid Storage driver for 32bit system
8)Intel Rapid Storage driver for 64bit system
0)exit

 

[MvdB]

Let's see what code W7 uses itself... in devicedrivers, when you go to update your IDE/ATA, what does it say? Can you post a snip of the details?

 

[Deman]

It has ata channels going twice 0 and twice 1.
Than there are 2 with names:
Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00

When I use the options to search drivers itself it finds nothing but when I use the option to search drivers manually and pointing it to the disc it updated the driver.

Okey they both have the same version now, it updated from 9.2.0.1011 to 9.2.0.1014.
I'm now off to work, if you have any more suggestions please make them. Maybe this solved BSOD? Only time will tell.

 

[MvdB]

It has ata channels going twice 0 and twice 1.
Than there are 2 with names:
Intel(R) 6 Series/C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08
Intel(R) 6 Series/C200 Series Chipset Family 4 port Serial ATA Storage Controller - 1C00

When I use the options to search drivers itself it finds nothing but when I use the option to search drivers manually and pointing it to the disc it updated the driver.

Okey they both have the same version now, it updated from 9.2.0.1011 to 9.2.0.1014.
I'm now off to work, if you have any more suggestions please make them. Maybe this solved BSOD? Only time will tell.

Hope so...if not, try the automatic scanner from intel:
http://downloadcenter.intel.com/default.aspx?iid=subhdr+dnlds_drivers

 

[Deman]

I think it's solved? So the combination of the latest gigabyte drivers + ata driver from disc fixed it?

Anyway, if it is solved thx If not still thx but than I'll be back.

 

[Deman]

Tadaaa I'm back!!
Okey, so it didn't fixed. I started up my PC today and every program started crashing with the details APPCRASH. So it sometimes does this before it BSOD's, but not this time. Nothing happend so I restarted my PC to avoid the damn crashes.
Than it BSOD on my at booting, system_service_exception 0x0000003b caused by driver: ntoskrnl.exe.
So should I look into updating my HDD firmware? Because the FAQ of samsung says my HDD needs an update to avoid compatibility problems.
http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=308

Edit: FAQ says boot in dos, the f3.zip only contains f3.exe could they really make DOS into this exe? Because if not than I would have to flash the usb to go dos right?

Edit2: I tried to run the program and it said that it wasn't made for my drive.
Could it be because of this?
2. Please connect Target HDD to Primary / Mast.

Because I do have a 103SJ F3

 

[MvdB]

Tadaaa I'm back!!
Okey, so it didn't fixed. I started up my PC today and every program started crashing with the details APPCRASH. So it sometimes does this before it BSOD's, but not this time. Nothing happend so I restarted my PC to avoid the damn crashes.
Than it BSOD on my at booting, system_service_exception 0x0000003b caused by driver: ntoskrnl.exe.
So should I look into updating my HDD firmware? Because the FAQ of samsung says my HDD needs an update to avoid compatibility problems.
http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=308

Edit: FAQ says boot in dos, the f3.zip only contains f3.exe could they really make DOS into this exe? Because if not than I would have to flash the usb to go dos right?

Edit2: I tried to run the program and it said that it wasn't made for my drive.
Could it be because of this?
2. Please connect Target HDD to Primary / Mast.

Because I do have a 103SJ F3

Yep, I'd do this. Easiest would be to burn their iso on a cd... and boot with the cd. It will open in a DOS screen that comes with their software.

Another choice is the USB stick as you suggested but then you'll have to know how to make sure your BIOS allows / is set to allow booting from USB...

 

[Deman]

Well like I said in edit2 the update is not for my drive. Even though it is. There is no iso in the zip only the f3.exe. I can run it from usb but it just says it's not for my drive. Maybe I already have the newest firmware? How to check and what next?

 

[MvdB]

Well like I said in edit2 the update is not for my drive. Even though it is. There is no iso in the zip only the f3.exe. I can run it from usb but it just says it's not for my drive. Maybe I already have the newest firmware? How to check and what next?

Ok, can't see exactly from here but it could be you need to run it from a dos command prompt. And, as you quoted, it must be the master drive...

 

[Deman]

I ran it from a bootable USB and it seems SATA cant be masterd/slaved it automaticly does that. Anyway I also read that I have the newest 1aj1001 firmware. So new solution anyone? :'( Stupid BSOD.

Edit: I pulled out the 2nd sata cable which was doing nothing because I have yet to plug it in my 2nd HDD. Also I replaced the sata cable with one of my previous computers, maybe it will help.

Edit 2012: Issue was solved by replacing my motherboard.