Solved BSOD when I wake pc from sleep mode

[ICIT2LOL]

In addition to what Arc has told you to do I suggest you run a memtest after this caught my eye.

474 errors : !nt (fffff80003092e00-fffff80003092fff)
MODULE_NAME: [COLOR=red]memory_corruption[/COLOR]
IMAGE_NAME:  memory_corruption
FOLLOWUP_NAME:  memory_corruption
MEMORY_CORRUPTOR:  LARGE
FAILURE_BUCKET_ID: [COLOR=red] X64_MEMORY_CORRUPTION_LARGE[/COLOR]
BUCKET_ID:  X64_MEMORY_CORRUPTION_LARGE
ANALYSIS_SOURCE:  KM
FAILURE_ID_HASH_STRING:  km:x64_memory_corruption_large
FAILURE_ID_HASH:  {6332b0e4-cf0e-2392-6ba8-f96ca91b7f36}
Followup: memory_corruption
---------

So see my ditty
MEMTEST
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.htmlthis one you will need to make a bootable disk set the BIOS to optical (or USB if preferred) boot the machine and let it run for at LEAST 8 passes unless the errors come up straight away. Takes a fair time to complete and some leave it running overnight.
If you do get errors and have more than one stick then you will need to test each one separately and maybe even in the separate slots. That is if errors do come up at any stage then you will need to run the test agin with stick 1 in slot 1 & 2 if no errors then it will be stick 2 and then again youtest it in bioth slot 1 & 2 - or whatever slots you have filled. So for instance if you have four sticks in then you are in for the long hul of testing each stick in each slot. If you do have to remove the sticks take the opportunity to clean the sticks contacts and the slots but be GENTLE doing that. See my other ditty for doing that
Make sure though it is at LEAST 8 PASSES anything less is not good enough. See pic you will see errors after 1 pass but it can take over 8 for a proper test.


SLOT CLEANING
Now as for the slots to clean them use a strip of old credit card about 1/2 inch wide nip the corners off one end - preferably round them off hold a piece of thin lint free cloth over the end dab on some form of alcohol - isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.
This can also be done for the GPU slot/s and also the contacts of the sticks or cards - not the stick but some lint free cloth of course. See my pic for the sick but please be very gentle doing it if you are in any doubt - please ask before doing it but I use this all the time and have yet to damage anything.

 

[Nelson35]

Nelson35 it is almost impossible for Arc to help you with your problem if you are doings things on your own or by the suggestion of others like your builder and not following Arc instructions.

I would suggest that you pick who you want to help you.
If you decide to use your builder or other sites please let us know how well it worked.

I suggest following Arc recommendation and reporting back logs and results.

Yes Layback Bear my builder suggested I try Arcs recommendation and see if that helps.

 

[Nelson35]

In addition to what Arc has told you to do I suggest you run a memtest after this caught my eye.

474 errors : !nt (fffff80003092e00-fffff80003092fff)
MODULE_NAME: [COLOR=red]memory_corruption[/COLOR]
IMAGE_NAME:  memory_corruption
FOLLOWUP_NAME:  memory_corruption
MEMORY_CORRUPTOR:  LARGE
FAILURE_BUCKET_ID: [COLOR=red] X64_MEMORY_CORRUPTION_LARGE[/COLOR]
BUCKET_ID:  X64_MEMORY_CORRUPTION_LARGE
ANALYSIS_SOURCE:  KM
FAILURE_ID_HASH_STRING:  km:x64_memory_corruption_large
FAILURE_ID_HASH:  {6332b0e4-cf0e-2392-6ba8-f96ca91b7f36}
Followup: memory_corruption
---------

So see my ditty
MEMTEST
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.htmlthis one you will need to make a bootable disk set the BIOS to optical (or USB if preferred) boot the machine and let it run for at LEAST 8 passesunless the errors come up straight away. Takes a fair time to complete and some leave it running overnight.
If you do get errors and have more than one stick then you will need to test each one separately and maybe even in the separate slots. That is if errors do come up at any stage then you will need to run the test agin with stick 1 in slot 1 & 2 if no errors then it will be stick 2 and then again youtest it in bioth slot 1 & 2 - or whatever slots you have filled. So for instance if you have four sticks in then you are in for the long hul of testing each stick in each slot. If you do have to remove the sticks take the opportunity to clean the sticks contacts and the slots but be GENTLE doing that. See my other ditty for doing that
Make sure though it is at LEAST 8 PASSES anything less is not good enough. See pic you will see errors after 1 pass but it can take over 8 for a proper test.


SLOT CLEANING
Now as for the slots to clean them use a strip of old credit card about 1/2 inch wide nip the corners off one end - preferably round them offhold a piece of thin lint free cloth over the end dab on some form of alcohol - isopropyl alcohol (what we swab the skin with before an injection) is good and GENTLY swipe along the slots.
This can also be done for the GPU slot/s and also the contacts of the sticks or cards - not the stick but some lint free cloth of course. See my pic for the sick but please be very gentle doing it if you are in any doubt - please ask before doing it but I use this all the time and have yet to damage anything.

Thanks ICIT2LOL I'll give this a try as well.

 

[groze]

If those suggestion above still doesn't work, try a clean uninstall and reinstall of the latest official AMD drivers.

 

[Nelson35]

ICIT2LOL, I did the memtest and it didn't find any errors

 

[ICIT2LOL]

Well back to Arc's suggestions mate

 

[Nelson35]

I got a new bsod today that I wanted you all to take a look at pls.

 

[ICIT2LOL]

Ok mate well from that it looks like graphics issue

MODULE_NAME: [COLOR="red"]atikmdag[/COLOR]

IMAGE_NAME:  [COLOR="Red"]atikmdag.sys[/COLOR]

The usual suggested fix for this is to uninstall The Catalyst Control Centre and run the GPU on it's own driver only. This is the closet I can get to that. Desktop

So uninstall the other stuff and install this - best download this beofre you do anything and then install form downloads. Just tip I keep Downloads as an iconn on my dektop > Start > type Downloads > right click > Send to desktop - so much easier than keep on searching for it.

 

[Nelson35]

Ok mate well from that it looks like graphics issue

MODULE_NAME: [COLOR=red]atikmdag[/COLOR]

IMAGE_NAME:  [COLOR=Red]atikmdag.sys[/COLOR]

The usual suggested fix for this is to uninstall The Catalyst Control Centre and run the GPU on it's own driver only. This is the closet I can get to that. Desktop

So uninstall the other stuff and install this - best download this beofre you do anything and then install form downloads. Just tip I keep Downloads as an iconn on my dektop > Start > type Downloads > right click > Send to desktop - so much easier than keep on searching for it.

Ugh this again eh? Guess I'll have to give your fix a try. Thanks for the link and for the suggestion. It hadn't did it in so long, I wonder what made it happen again? Oh well, hopefully this will take care of it.

 

[derekimo]

The usual suggested fix for this is to uninstall The Catalyst Control Centre and run the GPU on it's own driver only.

This should help with that,

http://www.sevenforums.com/tutorial...install-without-catalyst-install-manager.html

 

[ICIT2LOL]

I wonder what made it happen again?

Personally Nelson I had so much grief with AMD stuff after doing my first build on the advice of a friend I wnet to NViidia graphics and truly haven't had an issueith their system. Biut it ids your budget mate but I would go NVidia whenever you can afford to do it.

 

[Nelson35]

Thanks derekimo.

 

[Nelson35]

I wonder what made it happen again?

Personally Nelson I had so much grief with AMD stuff after doing my first build on the advice of a friend I wnet to NViidia graphics and truly haven't had an issueith their system. Biut it ids your budget mate but I would go NVidia whenever you can afford to do it.

I probably will at some point when I can afford to.

 

[Nelson35]

Ok mate well from that it looks like graphics issue

MODULE_NAME: [COLOR=red]atikmdag[/COLOR]

IMAGE_NAME:  [COLOR=Red]atikmdag.sys[/COLOR]

The usual suggested fix for this is to uninstall The Catalyst Control Centre and run the GPU on it's own driver only. This is the closet I can get to that. Desktop

So uninstall the other stuff and install this - best download this beofre you do anything and then install form downloads. Just tip I keep Downloads as an iconn on my dektop > Start > type Downloads > right click > Send to desktop - so much easier than keep on searching for it.

Well I've done as you suggested, hopefully that will take care of the problem.

 

[Nelson35]

Well it happened again after waking the PC up from sleep mode.

 

[Nelson35]

here's another bsod report.

 

[ICIT2LOL]

MODULE_NAME: [COLOR="red"]AtihdW76[/COLOR]

IMAGE_NAME:  [COLOR="Red"]AtihdW76.sys[/COLOR]

Probably caused by : AtihdW76.sys ( AtihdW76+1656 )

This is referenced as an ATI Function Driver for HD Audio Service and what I would suggest is to reinstall that audio driver .
From here https://www.asus.com/Motherboards/P8Z68V_PROGEN3/HelpDesk_Download/

 

[Nelson35]

MODULE_NAME: [COLOR=red]AtihdW76[/COLOR]

IMAGE_NAME:  [COLOR=Red]AtihdW76.sys[/COLOR]

Probably caused by : AtihdW76.sys ( AtihdW76+1656 )

This is referenced as an ATI Function Driver for HD Audio Service and what I would suggest is to reinstall that audio driver .
From here https://www.asus.com/Motherboards/P8Z68V_PROGEN3/HelpDesk_Download/

So I just download the driver and run it correct?

 

[ICIT2LOL]

Well that is what I would be trying first up. Plus I would also be running a sfc to check the system and just as a by the by sfc is sometimes best done three times in a row again something I do when things are not quite right. http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html - I always do this in safe mode when possible.

 

[Nelson35]

Well that is what I would be trying first up. Plus I would also be running a sfc to check the system and just as a by the by sfc is sometimes best done three times in a row again something I do when things are not quite right. http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html - I always do this in safe mode when possible.

I ran that but it didn't find anything. Here's a pic of my sound video controllers, which one of these am I to reinstall, the amd or the realtek hd audio? The drive you had me download appears to be for realtek.