Welcome aboard, Brabbit.
Fresco Logic xHCI (USB3) Device Driver is initially identified as the cause of the crash.
Code:
Irp is active with 4 stacks 3 is current (= 0xfffffa8005e36410)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800667da10 00000000 00000000-00000000
\Driver\pci
Args: 00000000 00000000 00000000 00000005
>[ 16, 2] 0 e1 fffffa800860dac0 00000000 fffff800032e31b0-fffffa800e4492c0 Success Error Cancel pending
[COLOR=Red] Unable to load image \SystemRoot\system32\DRIVERS\FLxHCIc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for FLxHCIc.sys
*** ERROR: Module load completed but symbols could not be loaded for FLxHCIc.sys
\Driver\FLxHCIc nt!PopSystemIrpCompletion[/COLOR]
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800e4492c0
Args: 00000000 00000000 00000000 00000000
And, the driver is very old.
Code:
start end module name
fffff880`049a5000 fffff880`049f5000 FLxHCIc T (no symbols)
Loaded symbol image file: FLxHCIc.sys
Image path: \SystemRoot\system32\DRIVERS\FLxHCIc.sys
[COLOR=Red] Image name: FLxHCIc.sys
Timestamp: Thu Feb 24 14:29:52 2011[/COLOR] (4D661E08)
CheckSum: 0004C3F2
ImageSize: 00050000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You try to update it from
FRESCO LOGIC INC.===Leap into SuperSpeed===.
The Device Object of the blocked IRP is really interesting.
Code:
Device object (fffffa800860dac0) is for:
InfoMask field not found for _OBJECT_HEADER at fffffa800860da90
\Driver\FLxHCIc DriverObject fffffa8008668910
Current Irp 00000000 RefCount 0 Type 00000022 Flags 00002050
DevExt fffffa8008af1370 DevObjExt fffffa800860dc30
ExtensionFlags (0000000000)
Characteristics (0x00000100) FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800667d7f0*** WARNING: Unable to verify timestamp for ACPI.sys
*** ERROR: Module load completed but symbols could not be loaded for ACPI.sys
[COLOR=Red]Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys[/COLOR]
\Driver\ACPI
Device queue is not busy.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses
SCSI Pass Through Direct (
SPTD), which is a well known BSOD causer. Uninstall the program at first. Then download SPTD standalone installer from
Disk-Tools.com, and execute the downloaded file as guided below :
- Double click to open it.
- Click this button only:
-
- If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
From another crash dump, that is alos a stop 0x9F; showing a different crasher. Atheros Bluetooth Driver.
Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8009de5030 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\btfilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for btfilter.sys
[COLOR=Red]*** ERROR: Module load completed but symbols could not be loaded for btfilter.sys
\Driver\BtFilter[/COLOR]
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ec5dc90
Args: 00000000 00000000 00000000 00000000
Update it from
ATHEROS drivers for Microsoft Windows (Atheros?????).
Apparently there are no other errors, but as the system is crashing, you should pay attention to these suggestions, too.
Free up the startup.
- Click on the Start button
- Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
- Select the “Startup” tab.
- Deselect all items other than the antivirus.
- Apply > OK
- Accept the restart.
Uninstall all the Asus bloatware.
Uninstall Trend Micro. Use
Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and
free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.
Do some USB oriented troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
- Right click on Computer icon > manage. It will open the computer management window.
- Click on "Device Manager" in the left pane, it will list all installed devices up.
- Expand "USB Serial Bus Controllers" by clicking on the triangle in front of it.
- Click on one item to select, then right click and uninstall.
- Do the same for all.
- Restart the computer.
- At restart, windows will auto configure the appropriate drivers.
And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off
For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.
Let us know the results.
