BSOD working PC sometime, error 0x0000007a

[reparnd]

0x0000007a (0xfffff6fb40000038, 0xffffffffc000000e, 0x0000000052872884, 0xfffff68000007000).










Hello! periodically crashes with this error no matter what actions I'm doing on the computer. Hard drives tested - HD Tune, memory - memtests, temepratura processor as well as all other parts are normal. Now I will check the voltage that produces power supply, all the equipment is new except for the power supply.Advise what can be done, thanks in advance.

 

[Arc]

Hi reparnd.

It appears that the issue is with the storage/discs.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

[COLOR=Red]KERNEL_DATA_INPAGE_ERROR (7a)[/COLOR]
The requested page of kernel data could not be read in. [COLOR=Red] Typically caused by
a bad block in the paging file or disk controller error[/COLOR]. Also see
KERNEL_STACK_INPAGE_ERROR.
[COLOR=Red]If the error status is 0xC000000E[/COLOR], 0xC000009C, 0xC000009D or 0xC0000185,
[COLOR=Red]it means the disk subsystem has experienced a failure.[/COLOR]
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fb40000038, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 0000000052872884, current process (virtual address for lock type 3, or PTE)
Arg4: fffff68000007000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


[COLOR=Red]ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.[/COLOR]

[COLOR=Red]DISK_HARDWARE_ERROR: There was error with disk hardware[/COLOR]

BUGCHECK_STR:  0x7a_c000000e

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff800036ff438 to fffff8000368bf00

Do the following, one by one.

Make it sure that the Corsair Force GT is running with the latest firmware. They do it via their forums: The Corsair Support Forums - Powered by vBulletin

Disable it: ACJXMKMS IDE Controller. Probably you need to go to the BIOS to search the options for it.

Test your Seagate HDD using Seatools for DOS: http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html
** Note that Your Storage controller is set to AHCI mode, and you need to do some adjustments as stated there.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.

1. Right click on "my computer" icon and click "manage" on the context menu.
2. It will open the "computer management" window.
3. Select "Device Manager" in the left pane, It will list all the existing devices up.
4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
5. Select one Intel device item under it, right click, uninstall.
6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.

Re-seat the sata and power cables. Change the SATA cables. Apply the SATA cable to another unused SATA port on the motherboard. Make it sure that all the screws holding the HDD to the stand are tightly screwed.

• 

Let us know the results.