Solved Cannot connect to Modem

[cyclone3211]

The primary modem is a WRT600N and the secondary bridged modem is a E3000.

I tried connecting to the E3000, as I have done in the past, by using an Ethernet connection between it and my laptop. Each of these modems has a different password, yet when I use the Linksys standard 192.168.1.1 at the laptop, the WRT600N log-on appears and I cannot get to the E3000 at all.

I tried turning off the WRT600N and used a neighbor's WiFi, to bypass the WRT600N, up pops the neighbor's modem name requesting a password.

I cannot ping it either, but I am able to ping other network units from my desktop.

I need to make some security mode changes, yet I do not know what else to do to get inside the E3000.

 

[kegobeer]

Are you trying to get to your modem or to those routers? The WRT600N and the Linksys E3000 are routers.

It sounds like the subnet and/or IP address of the router has been changed. I would take the E3000 and connect it directly to your computer via ethernet cable and configure it. If DHCP has been turned off on the E3000, do a hard reset - that will set the Linksys back to the default 192.168.1.1.

 

[cyclone3211]

All is fixed...........Thank you!