Can't seem to rename files in AVG Rescue

[VistaKing]

The commands didn't work ? What .sys file does the PC reboot on when trying to get in safe mode . Press F8 while the PC is booting up .

 

[Rawad]

alright let me check for you.

 

[Rawad]

The commands didn't work ? What .sys file does the PC reboot on when trying to get in safe mode . Press F8 while the PC is booting up .

Classpnp.sys then it goes to that pitch black screen with only the mouse cursor showing. Commands worked successfully as it said on the command prompt . then I restarted it and same crap.

 

[VistaKing]

Can you open the MSCONFIG inside command prompt

Type

MSCONFIG

And press [ENTER]

If the command prompt opens to path X:\Sources

Type

bcdedit | find "osdevice"

   Note

the | pipe symbol is the key above Enter . Hold shift down and press the key with \ on it

Press the enter key after you inputted the command . It will tell you the drive letter of Windows . It might say its os device partition=D:

IF so type in this command

D:\Windows\System32\msconfig.exe

   Note

If the OS device command says its C: Change the D: to C:

 

[Rawad]

screw it, it give me a error bad Image.

 

[VistaKing]

What is the error it gave you ? Don't give up

 

[Rawad]

What the error says
ImageShack® - Online Photo and Video Hosting

 

[VistaKing]

When you ran this command

" sfc /scannow /offbootdir=c:\ /offwindir=C:\windows " did you change C:\ to D:\ ? The command I had you type shows that The OS is installed in D:\

Your result was os device partition=D:

 

[Rawad]

Yeah my OS is on the device partition D. I shouldn't change the partition then, I should keep it C?

 

[VistaKing]

Run sfc /scannow /offbootdir=c:\ /offwindir=C:\windows again but this time change the c: to d: and see what you get

 

[Rawad]

I think I already did that, I need a break, brb later

 

[Rawad]

I did switch the C to D Vistaking before , I will try one last time ImageShack® - Online Photo and Video Hosting

 

[Rawad]

Nope same problem happened.

 

[VistaKing]

In command prompt type in the command below

findstr /D:"[SR] Cannot repair member file" %windir%\logs\cbs\cbs.log >F:\sfcdetails.txt

   Note

substitute F:\ with the actual Drive letter of your flash drive to verify try the commands below. Press the ENTER Key after each command

Diskpart 
List volume

 

[Rawad]

Did I misspell anything?
ImageShack® - Online Photo and Video Hosting

 

[VistaKing]

Try this commands to verify what drive letter below a to what drive

Diskpart

Press ENTER

LIST VOLUME

Press ENTER

 

[Rawad]

Ok... now what
ImageShack® - Online Photo and Video Hosting

 

[VistaKing]

Looking at your Diskpart the command should be


findstr /D:"[SR] Cannot repair member file" %windir%\logs\cbs\cbs.log >F:\sfcdetails.txt


F:\ being your flash drive
D:\ being the Windows

 

[Rawad]

So I tried the code you posted , it says "The device is not ready"

 

[VistaKing]

Lets remove the F:\ and try the command again