Solved Constant Random BSODs on a 5 days old system

[Jonathan_King]

I'm not surprised at all, if that program is the cause, due to the nature of the BSODs. I should have noticed that program earlier, and had you uninstall it.

 

[iTitus]

BSOD on reboot(C1: Special pool detected memory corruption). Just after signing out, during "shutting down"
Files:


I'm going to run the performance test from passmark again to check if the 3B is gone.
EDIT: 3b is gone. C1 remains

I've got a feeling we are almost there. The one problem that remains is the shut down BSOD
Which occurred after I went messing with the driver verifier(by checking the drivers that were not loaded aswell).

Any ideas on this C1? THANKS!

 

[iTitus]

Got a new batch of BSOD's for you
What about a system recovery to before I started using Driver verifier?
Before that I never had the 1C...

Well I'm getting crazy! What could it be, what test could I run? THANKS

Titus

 

[Tews]

Download the latest drivers for your video card ... ATI Video driver (remove the Catalyst Control Center and only install the Display Driver) ... http://www.ati.com/

....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {411, fffff6fcc005cc30, 1d400000a2e378c2, bffff6fcc005cc31}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : [COLOR="Red"]atikmdag.sys [/COLOR]( atikmdag+35e705 )

Followup: MachineOwner
---------

 

[iTitus]

This one:?
Display Driver Only (?) 50.9MB 10.7 7/26/2010
I am using CCC atm to get full screen with my hdmi cable :O Well, i'll see. Next 1A BSOD, it's byebye ati CCC

Thanks

 

[iTitus]

another BSOD. Is it still CCC?

Thanks

 

[iTitus]

New kind of BSOD: "A"
Files:

 

[iTitus]

Bsod while idle(was even afk)

 

[Jonathan_King]

I see three crashes, 2 of which occurred while using the internet.

Update your Realtek drivers: Realtek

Enable driver verifier: http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

...Summary of the Dumps:

[font=lucida console]
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Aug 26 19:56:58.512 2010 (UTC - 4:00)
System Uptime: 0 days 0:59:01.870
BugCheck 1A, {411, fffff68000064998, f6d00000c989b824, bffff68000064999}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+6051 )
BUGCHECK_STR:  0x1a_411
PROCESS_NAME:  MsMpEng.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Aug 26 15:43:53.430 2010 (UTC - 4:00)
System Uptime: 0 days 4:01:28.428
BugCheck A, {28, 2, 0, fffff80002ed0518}
Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  svchost.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Aug 26 11:41:50.028 2010 (UTC - 4:00)
System Uptime: 0 days 1:09:15.386
BugCheck 3B, {c0000005, fffff960000f840e, fffff8800863dcf0, 0}
Probably caused by : win32k.sys ( win32k!HmgShareLock+72 )
BUGCHECK_STR:  0x3B
PROCESS_NAME:  uTorrent.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨[/font]

 

[Jonathan_King]

Yeah, I didn't know if you had a 100 or 1000 card.

If you're sure you have a 100 card, install this driver: Realtek

I think you have a 1000 though: Realtek

You can install both if you like, perhaps only 1 will actually install.

 

[iTitus]

Another BSOD playing starcraft 2 with skype. That just doesn't seem to work. Single player does, but multi...
I have Ati CCC removed and my realtech lan drivers updated...
Any Idea's? It's software, not hardware?


EDIT: Another other bsod, during browsing/chatting
files are named "BSOD 3D"

 

[iTitus]

Now it's getting crazy : While watching a video podcast on the internet I got a 1A BSOD:
Files:
Please Also look at my previous post

 

[Tews]

Your .dmp file still shows the same video driver as the cause of your crashes... Did you ever update them??

....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {411, fffff6fcc005cc30, 1d400000a2e378c2, bffff6fcc005cc31}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by :[COLOR="Red"] atikmdag.sys[/COLOR] ( atikmdag+35e705 )

Followup: MachineOwner
---------

 

[iTitus]

Yeah I did, I uninstalled ATI CCC and installed the driver from the site you provided.
Perhaps an older driver could work?
That's the 1A BSOD
I also got 3D 3B,
Wait, I got another BSOD file coming, 7B

 

[zigzag3143]

Yeah I did, I uninstalled ATI CCC and installed the driver from the site you provided.
Perhaps an older driver could work?
That's the 1A BSOD
I also got 3D 3B,
Wait, I got another BSOD file coming, 7B

Did you use the un-install tool from ati?


When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

 

[Tews]

Ken is spot on, as usual, make certain that the old ones are completely removed before reinstalling ...

Thanks for the assist Ken...

 

[iTitus]

I sweeped it with Guru3D and installed the new.
Now I have 2 non bsod problems:
My max resolution is 1400x1050 iso 1920x1080
and there is a black border arround my screen.
I think this is because I installed the driver only and not CCC(which was the instruction right?)

And I still have these others BSODS besides 1A, the 3B, 3D, and 7F:

 

[Tews]

The dmp(s) point to ntkrpamp.exe or ntoskrnl.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. ... Before we can go any further, make sure that you have followed Kens' instructions for replacing your video driver...

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050031, 6f8, fffff80002eb8948}

Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {411, fffff6fc50017650, 834000007e95f882, bffff6fc50017651}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+6051 )

Followup: MachineOwner
---------


*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3D, {fffff88002ffd110, 0, 0, fffff880049b037d}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+ea37d )

Followup: MachineOwner
---------

 

[iTitus]

What about the skype crash?
And about what ken said:
I Did, but as stated I have the following new problems:
My max resolution is 1400x1050 iso 1920x1080
and there is a black border arround my screen.
I Installed the 2nd download from this page:
http://sites.amd.com/us/game/downloads/Pages/radeon-win7-64.aspx
Was Ati CCC really a problem? Or just the driver, which was updated like yesterday?
Because with CCC I didn't have these troubles

I'll try and play some games to see if I still get errors now with thes strange resolutions
Thanks for still taking time to help me!

 

[iTitus]

Ever since I cleared the drivers with the GURU3d tool, I can't install new ones
It "installs" fine, but there are some errors, but there arn't and then nothing is installed ...