Error code with gtx 480 on asrock k10n78m

[MaCruise]

Hey,

i get an 0x000000a5 (0x0000000000001000, 0x0000000000000000, 0x00000000e0080000, 0x00000000000000ff) blue screen.

not fully acpi complaint ... I get this 1 with the gtx 480 running windows 7.

With the 9800 gtx on windows 7 there is no problem at all.
I allready updated the bios but still nothing better.

Is there an sollution for this problem?

 

[Rik55]

I think possibly the motherboard BIOS has loaded it's default settings. Try going into the BIOS - Advanced - ACPI Configuration - ACPI HPET Table is Enabled & Suspend to Ram is Enabled. Also in BIOS - Advanced - Chipset - make sure Primary Graphics Adapter is PCI-e and that HybridSLI is Disabled. Other things you could check is if your Hard Drive is SATA, check that the OnBoard SATA operation mode is set the same as when the Operating System was installed. ie do you run your SATA drivers in IDE mode or AHCI mode.

 

[MaCruise]

Thanks for the reply ,

but that wasent the problem.

What i did ... was changing the voltage of the cpu (from auto to 2.10) and the voltage of the dram (auto to 1.25)
Also enabled the hybridsli.
Still i dont know if the problem came from the voltage or the hybridsli ...

But i can play now !!!

 

[MaCruise]

enable Hybridsli will do the work. let the voltage on auto