Hi all, I'm currently trying to re install Windows from scratch and am having some trouble sorting out partitions on my HDD.
I used a tutorial I found on here to create the partition but when I booted up windows my C: Drive only had the free space of the partition with the amount the OS took up used (100GB Partition left me with about 70GB or so).
I then went through the process again but this time decided to just try and clean format etc the whole HDD to put the OS onto but after doing this it kept telling me that it could not load windows onto Disk 0. Im guessing this is because its a 1TB HDD?
What is the best way to load the OS onto the HDD while keeping all of the space?
I know this may be abit complicated to read but I have tried to word it the best I can.
Thanks!
I used a tutorial I found on here to create the partition but when I booted up windows my C: Drive only had the free space of the partition with the amount the OS took up used (100GB Partition left me with about 70GB or so).
I then went through the process again but this time decided to just try and clean format etc the whole HDD to put the OS onto but after doing this it kept telling me that it could not load windows onto Disk 0. Im guessing this is because its a 1TB HDD?
What is the best way to load the OS onto the HDD while keeping all of the space?
I know this may be abit complicated to read but I have tried to word it the best I can.
Thanks!
Last edited:
My Computer
At a glance
Windows 7 Professional 64biti5 6500 @3.2Ghz16GB Kingston Red FuryAMD RX480 4GB
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- Custom
- OS
- Windows 7 Professional 64bit
- CPU
- i5 6500 @3.2Ghz
- Motherboard
- ASUSTEK Z170-E
- Memory
- 16GB Kingston Red Fury
- Graphics Card(s)
- AMD RX480 4GB
- Hard Drives
- 1TB