Help me please.....

[DanR]

and it will do something to my computer like erase stuff??

I just show it and its just said how to install the win7....... never mind....

 

[The Cool Guy]

No it won't erase stuff, and see the link i posted before.

 

[DanR]

I think it will be better if I just do a clean install of the 7100 version.......[= tnx for helping me I decide what I want to do.......

 

[The Cool Guy]

Ahhh...good relief...thanks

 

[Mitaek]

I had the same problem. I fixed it by
1. Opening the control panel.
2. Went to "System" and then "check my windows experience index"
3. Clicked on the "Re-run the assessment" icon in the lower right corner of the newly opened window.
4. As it ran the assessment, windows recognized my graphics card and all was well.

 

[DanR]

I had the same problem. I fixed it by
1. Opening the control panel.
2. Went to "System" and then "check my windows experience index"
3. Clicked on the "Re-run the assessment" icon in the lower right corner of the newly opened window.
4. As it ran the assessment, windows recognized my graphics card and all was well.

didn't worked.....

 

[DanR]

Well if you have solution to my problem its still be good...... (even though I said Ill install another version of the WIN7 its not sure yet so..... I still need a solution.....)
tnx for all

 

[The Cool Guy]

I would be able to help you, if you specify the name and model of the graphic card.

 

[DanR]

I would be able to help you, if you specify the name and model of the graphic card.

well I will have to open my computer for that??

 

[Snufffed]

Several method to find your Graphic card.
1. check the manual - it tells what it should be.
2. many 3rd party programs will tell you also. (Belarc - Free) for one.
3. If you download and upgrade to a newer version, you will have to modify the ISO. unless you upgrade to Official release "7100" .
4. Beta versions are BETA=TEST and many times MS leaves out specific items for testing.
5. MS has released a new Win7 Compatibility tester. recommend you DL it and run.
6. sometimes if you have your resolution set to hi, install will default to Std VGA as to insure you have a Display.
7. You might simply now open control panel --> system --> devices --> DELETE the VGA card - then reboot and see if Win7 will then install a different driver (due to resolution now being set lower).

 

[DanR]

Several method to find your Graphic card.
1. check the manual - it tells what it should be.
2. many 3rd party programs will tell you also. (Belarc - Free) for one.
3. If you download and upgrade to a newer version, you will have to modify the ISO. unless you upgrade to Official release "7100" .
4. Beta versions are BETA=TEST and many times MS leaves out specific items for testing.
5. MS has released a new Win7 Compatibility tester. recommend you DL it and run.
6. sometimes if you have your resolution set to hi, install will default to Std VGA as to insure you have a Display.
7. You might simply now open control panel --> system --> devices --> DELETE the VGA card - then reboot and see if Win7 will then install a different driver (due to resolution now being set lower).

I did 7 and it show me like I still have the Standard VGA..... its like the VGA was reinstall after I delete it.....

 

[Snufffed]

can you give me the full specs of your machine?
by using Belarc. then save as .txt file. so you can remove all the unneeded stuff.
sample of what belarc.txt will show: plz note BOLD -RED

Operating System System Model
Windows Vista Professional (build 6000) Enclosure Type: Desktop
Processor a Main Circuit Board b
2.00 gigahertz AMD Athlon 64
128 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: AOpen K8HTB-8237
Bus Clock: 201 megahertz
BIOS: Phoenix/Award Technologies, LTD 6.00 PG 01/31/2005
Drives Memory Modules c,d
171.51 Gigabytes Usable Hard Drive Capacity
102.43 Gigabytes Hard Drive Free Space
DVDRW 16X16 ATA Device [CD-ROM drive]
VOM-12E48X ATA Device [CD-ROM drive]
3.5" format removeable media [Floppy drive]
IC35L060AVVA07-0 [Hard drive] (61.49 GB) -- drive 2, s/n
VNC300A3G4GLGA, rev VA3OA50K, SMART Status: Healthy
QUANTUM FIREBALLP AS30.0 [Hard drive] (30.02 GB) -- drive 0, s/n
193107578453, rev A1Y.1500, SMART Status: Healthy
WDC WD800JB-00ETA0 [Hard drive] (80.03 GB) -- drive 1, s/n
WD-WCAHL2579921, rev 77.07W77, SMART Status: Healthy 1024 Megabytes
Installed Memory

MFC-3100C USBon USB001
KODAK EasyShare printer dockon USB002
Microsoft Shared Fax Driveron SHRFAX:
Microsoft XPS Document Writeron XPSPort:
Send To Microsoft OneNote Driveron Send To Microsoft OneNote
Port:
Controllers Display
Standard floppy disk controller
ATA Channel 0 [Controller]
ATA Channel 1 [Controller]
VIA Bus Master IDE Controller - 0571 NVIDIA GeForce FX 5500
(Microsoft Corporation - WDDM) [Display adapter]
Samsung SyncMaster [Monitor] (19.1"vis, s/n HCHX902388, October
2004)

 

[DanR]

look at this:

Processor :
1.85 gigahertz AMD Sempron
128 kilobyte primary memory cache
256 kilobyte secondary memory cache
System Model:
Enclosure Type: Desktop
Main Circuit Board :
Board: Welcome to Universal ABIT Co., Ltd. - Get ready for the Next Generation NF7-S/NF7-M/NF7 (nVidia-nForce2) 1.X
Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 08/20/2004
Drives:
174.16 Gigabytes Usable Hard Drive Capacity
80.81 Gigabytes Hard Drive Free Space

AOPEN CRW5232/AAO PRO [CD-ROM drive]
3.5" format removeable media [Floppy drive]

HDS728080PLAT20 [Hard drive] (82.35 GB) -- drive 0, s/n PFD2B1S2RXLP2D, rev PF2OA21B, SMART Status: Healthy
HP Photosmart C4340 USB Device [Hard drive] -- drive 3
QUANTUM FIREBALLlct15 15 [Hard drive] (15.02 GB) -- drive 2
WDC WD800BB-00JHC0 [Hard drive] (80.02 GB) -- drive 1
Memory Modules:
1248 Megabytes Installed Memory

Slot 'A0' has 256 MB
Slot 'A1' is Empty
Slot 'A2' has 1024 MB
Main Circuit Board :
Board: Welcome to Universal ABIT Co., Ltd. - Get ready for the Next Generation NF7-S/NF7-M/NF7 (nVidia-nForce2) 1.X
Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 08/20/2004
Display:
Standard VGA Graphics Adapter [Display adapter]
Generic PnP Monitor (17.1"vis, s/n F2VI630285255, îøõ 2006)
Multimedia:
Realtek AC'97 Audio
Bus Adapters:
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller (2x)


this is exactly the info that the Belarc says......

 

[Snufffed]

You might try installing the Drivers which came with the computer.
I'm having no luck with finding the correct drivers.
ABIT site is rather short on support. It directs me to NVidia.
or suggests this:

[URL="http://www.driverrepairs.com/abit.php"]Update Your Abit Drivers Today![/URL][URL="http://www.driverrepairs.com/abit.php"]
[/URL]

 

[Orbital Shark]

You could try here

Drivers - Download NVIDIA Drivers

and see if it picks anything up

Based on your nVidia nForce2 chipset

 

[DanR]

You could try here

Drivers - Download NVIDIA Drivers

and see if it picks anything up

Based on your nVidia nForce2 chipset

I tried it but it didn't work......

 

[Snufffed]

Then I strongly recommend you dl and upgrade to the latest Pre-RTM version. Win7 7137. and since you have 7068 version you will have to modify the DL version. easy to do...
Download the ISO, extract with winrar or UltraISO.
open --> sources --> open cversion -->

[HostBuild]
MinClient=7077.0
MinServer=7100.0

Modify to read

[HostBuild]
MinClient=7000.0
MinServer=7000.0

then save. you can open with notepad.
Then you can either burn to DVD or simply click setup.exe. That will allow you to upgrade... if you do not want to upgrade, do not modify. Simply do a Clean install.

 

[Orbital Shark]

Personally i would do a clean install, that way you can guarantee you get the smoothest of installations (no bugs carried from previous build).

 

[Snufffed]

I'm one of those who "upgrade" all the time. 7000 was clean all the rest were UPgrades. All my installs/upgrades go smooth....

 

[Orbital Shark]

You're one of the lucky ones mate. There's always remnants on the previous install, which means that bugs could possibly be carried on too

Not 100% but it's still possible