high temps even with a H70!!!

[Damonlandsdown]

hey, im using a h70 with AS5 yes ive let it cure.

still running 40 -44 at idle- 3.2ghz

 

[Damonlandsdown]

and about 70 with large fft on prime 95

 

[Everlong]

How did you apply the thermal compound?

And which way do you have the fans blowing through the radiator?

 

[Damonlandsdown]

fans- push pull
thermal paste, center of the cpu- small amount

 

[Damonlandsdown]

note, this was spread out thiner then it looks

 

[Everlong]

Best way I found to apply thermal paste to i7s is a vertical line down the middle. That way when the heatsink gets mounted, the paste is spread equally over all 4 cores (due to the core layout).

Are your fans drawing air in from outside the case, or blowing air out the case? If they're blowing air out, then you gotta think the radiator is having hot air from inside the case blowing through it, which isn't gonna be great for temps.

I've never used a Hxx cooler, so I can't really recommend setups.

 

[loquacious]

Best to have used thermal paste that comes with the cooler it is excellent stuff. Applying your own in most cases causes exactly whhat has happened to you HIGHER temps.

 

[Damonlandsdown]

ok, today i will reseat it and see what its like.

 

[linnemeyerhere]

This is going to be my next dare I say compound.....no ETI actually. This stuff is off the hook amazing, please follow directions and be prepared to watch the temps fall like no other thermal paste!
Indigo Xtreme™ Engineered Thermal Interface (ETI) Kit for Core i7, LGA 1366 - 2 Pack - FrozenCPU.com

 

[Everlong]

This is going to be my next dare I say compound.....no ETI actually. This stuff is off the hook amazing, please follow directions and be prepared to watch the temps fall like no other thermal paste!]

I've read about that before. Looks cool. Good thing about it is it doesn't matter too much about heatsink-CPU contact as it fills in all gaps itself unlike normal compounds. Pricey though for something that gives 2-3C difference against something like MX-2.

Plus you only get 2 in a pack. Mess up the first time and that's $10 down the drain.

 

[jeepmann4x4]

hey, im using a h70 with AS5 yes ive let it cure.

still running 40 -44 at idle- 3.2ghz

I run a H70 in my setup(see specs) and the snip is my temps.... 1st is while on the net and running background programs. The "min" is idle and the "max" is while playing Crsis...
I also use the push pull.. mine is setup as exhaust out of case, I used the stock H70
thermal compound.
What fan headers are you plugged into? If you have the pump plugged into the "cpu fan" it may not be running right as it will run faster or slower at time like a cpu fan should but a pump should not... it should run full power all the time! check you settings and setup. I run my pump off the PSU with a molex adapter and the fans off the "cpu fan" header.