I need help accessing wireless IP Camera

[CarvedDuck]

Hi All,

Trying to set up a Foscam wireless IP Camera as a baby monitor. I have it is working great when I access it directly by a static IP address and Port that I assigned via my Router (Actiontec).
192.168.0.69:6105

I went to No-IP.com and set up a Dynamic DNS with a Hostname of
foscam1baby.no-ip.info

I set the Port Forwarding in the Router to 6105 for IP 192.168.0.69 address of the camera.
I set the DDNS in the Router with the Hostname, login name and password.

With the following in Firefox
foscam1baby.no-ip.info:6105

Firefox times out and can't find the camera. If I drop the Port and use
foscam1baby.no-ip.info

It shows the login for the Router master account and asks for the password. If I put that in, it then goes to the Router's Firmware set up so the Router is at least accepting that much.

I have tried messing with the Router Firewall, the Comodo Firewall and NoScript settings and even disabled them all, and still nothing when using the DDNS Hostname.

I watched several video tutorials and followed them exactly, but when it came to using the DDNS-Hostname it failed.

Day two -- how can I make this work?

Thanks

 

[UsernameIssues]

...If I drop the Port and use
foscam1baby.no-ip.info

It shows the login for the Router master account and asks for the password. If I put that in, it then goes to the Router's Firmware set up so the Router is at least accepting that much.....

You should not enable remote administration of the router. If you have a smart phone, you can turn off Wi-Fi and surf to the camera's webaddress : port.

Maybe some forum member is familiar an Actiontec router and can help you get the settings right. If not, contact your ISP (Verizon?).