Solved Installing Win7 on an MSI MEG Z590 ACE

[SIW2]

It is probably too big , file upload size is very limited on this forum. You could upload somewhere like onedrive and post the link here.

 

[SNKohlmeyer]

https://1drv.ms/u/s!Atv7bt6wCVJQgXJlUyOqoLLPlaJ3?e=BqykeG

- - - Updated - - -

Done. Here you are:

- - - Updated - - -

Is there a 10th Gen mod for the UHD Graphics 630 driver? And could you go over the msinfo32.txt and tell me how to clear the yellow triangles? Some of the drivers – Bluetooth, wi-fi, Realtek audio – I don't care if they work or not; have other devices for those.

 

[SIW2]

[Solved] Win 7 x64 intel 10th gen (Comet Lake) Intel UHD 630 Video driver - #3 by Shadic12 - Windows 7/Vista/Server 2008 - Win-Raid Forum

Work only in the test mode because they are not digitally signed
We have to put the system into test mode, which is not always convenient.

If you have a graphics card that has win7 drivers it is better.

 

[SNKohlmeyer]

Thanks! I'm using an MSI AMD Radeon RX 6750 XT which natively has drivers for Win 7, 10, and 11.
https://www.amd.com/en/support/grap...d-radeon-rx-6700-series/amd-radeon-rx-6750-xt

Just wanting to clear the yellow triangles.

 

[SIW2]

fernando has a set of infs on win raid forum

Intel Chipset Device "Drivers" (= INF files) - Other Drivers - Win-Raid Forum

 

[SNKohlmeyer]

Are there any mods for devices like the Serial IO GPIO Host Controller, Management Engine Interface, etc? I had read before that the code for all 14 nm chips was basically the same. The SMXDIY_Win64_15.45.27.5068_Beta_4.0_signature set was modded 6-9th gen, based on Intel's releases through 7th gen.

Here's my list of non-functioning devices:
Device PNP Device ID Error Code
Network Controller PCI\VEN_8086&DEV_2725&SUBSYS_00248086&REV_1A\4&3D1C241&0&00E6 The drivers for this device are not installed.
Not Available ACPI\INT34C6\2&DABA3FF&2 The drivers for this device are not installed.
PCI Simple Communications Controller PCI\VEN_8086&DEV_43E0&SUBSYS_7D041462&REV_11\3&11583659&0&B0 The drivers for this device are not installed.
Not Available ACPI\MBID0004\1 The drivers for this device are not installed.
SM Bus Controller PCI\VEN_8086&DEV_43A3&SUBSYS_7D041462&REV_11\3&11583659&0&FC The drivers for this device are not installed.
Generic Bluetooth Adapter USB\VID_8087&PID_0032\5&F6DA57B&0&14 This device is working properly.
Intel(R) USB 3.1 eXtensible Host Controller PCI\VEN_8086&DEV_1137&SUBSYS_00008086&REV_00\EB0D58E833C9A00000 This device cannot start.
PCI Device PCI\VEN_8086&DEV_43A4&SUBSYS_7D041462&REV_11\3&11583659&0&FD The drivers for this device are not installed.
Video Controller PCI\VEN_8086&DEV_9BC5&SUBSYS_7D041462&REV_05\3&11583659&0&10 The drivers for this device are not installed.
Realtek USB2.0 Audio USB\VID_0DB0&PID_80A5&MI_00\6&17865F84&0&0000 This device cannot start.

- - - Updated - - -

The only thing I really care about are the chipset drivers, if they exist. The internal Thunderbolt driver would nice. The rest are not needed in Win 7, since there are PCIe devices that carry over from the other build.

 

[SIW2]

The only thing I really care about are the chipset drivers, if they exist.

If you already tried Fernanado's
B. Latest “pure” Intel Chipset Device *.INF files (for the manual installation)
https://mega.nz/file/55QyWLCB#pAXGcybcjuV05eIr7CPTIqHXrI0VlnwTsT3liAYjqJc
from my previous link, I dont have any other suggestions

The internal Thunderbolt driver would nice.

The last official win7 thunderbolt drivers for tbt 1&2 controllers
View attachment Win7Thunderbolt-contollers1and2.zip
there might be some more recent modded thunderbolt drivers on win raid or elsewhere, I have never looked.

Have you exported and uploaded the drivers from your current system ?
post #33

 

[SIW2]

Instructions for adding nvme support to hp 800 g1
Add NVMe Boot Support to a HP EliteDesk 800 G1