Latest AMD Catalyst Video Driver for Windows 7

[stormy13]

well if you use driver sweeper and apply the hotfix only you won't see the 10.12

Correct. I posted this a few pages back,



which is the 11.1a after using the Genetix Cleaner from here (and from what I have seen so far, doesn't have any of the issues that Driver Sweeper can),

Catalyst [Modified build] - Guru3D.com Forums

also when you do apply the hotfix it will not tell you what version it is either

It still shows what CCC version it is as well as the driver versions, it just doesn't show the Catalyst version. Heck if you wanted to you could make it say anything you wanted too,

Rage3D Discussion Area - View Single Post - AMD Catalyst 11.1 & 11.1a Hotfix Now Available

just find that line in the WHQL set or add it to the hotfix and add the version number yourself, or make it say anything you want it too as it has no affect on how anything works.

Yes the ccc disappears and when you go to start up it opens then disappears it brings down the WEI as well a multitude of issues.

That is something else than the missing CCC version showing. Mine opens and closes just fine.

@ sygnus21, like profdlp not seeing that here and not sure that I have seen it mentioned elsewhere. I have seen that some are getting a strange mouse lag in the top right corner of their screens though, a few of them in the above Rage3D thread. Seeing as you haven't yet maybe post about it over there and see if anyone else is getting it.

 

[sygnus21]

@ sygnus21, like profdlp not seeing that here and not sure that I have seen it mentioned elsewhere. I have seen that some are getting a strange mouse lag in the top right corner of their screens though, a few of them in the above Rage3D thread. Seeing as you haven't yet maybe post about it over there and see if anyone else is getting it.

Thanks, will do that. Yeah the only issue for me is the delay when right clicking items on the desktop. Doesn't happen anywhere else, and I haven't noticed any other issues.

Anyway I will take your advice and post the issue over at rage.

Thanks.

 

[Zirro]

Anyone one else notice there a slight delay when right clicking on the desktop with the last two driver updates with the new control panel?

Thanks.

Not exactly the same problem but since installing 11.1 my video rendering performance has deteriorated significantly. Web pages are rendering very slow.
I thought it was my internet connection but it is fine.

 

[jr26]

Had my first driver crash since I bought my 6870 a few weeks ago w/11.1a hotfix. Back to 10.10e for me!

 

[mpcrsc562]

I'm kinda pissed with this 11.1...

Between this past Friday and today, there were two things I've done to my pc, one hardware the other software. Friday night, I removed a card reader from the front bay--no big deal. Yesterday, I installed Catalyst 11.1. Every single cold boot or restart of my pc has resulted in a BSOD at startup.

10.12 has worked flawless for me and I should have known better than to upgrade software when what's already installed is working as it should...

Back to 10.12 to stay... for a nice long while.

 

[Chiumiento]

Why is my Catalyst Version 10.12? Is it supposed to be 11.1 Or not? I downloaded the full new package and all like I always do. I have the same page saved as a book mark. But I always look it up without using the bookmark first to make sure it is still the right page and it was. So I downloaded the same package I have done the last couple of times. But When I go into Catalyst control center and go into software it says Catalyst Version 10.12. I just want to know if this is right. I even tried to go and download them individually. Just before I actually let it download again I checked the version and they were the same ones I already have. So I did not download them for a second time. Yes, I have tried completely uninstalling all ATI products manually and reinstalling the package.

 

[stormy13]

Chiumiento look up, post 1281.

 

[Zardoc]

I had black screens with the 10.12. Went back to 10.11.

I tried 11.1, no issues at all. I also like the new control panel tha lets me add colour.

 

[Dave76]

Still on 10.12 no issues, after reading this I'm going to skip 11.1

 

[tw33k]

10.12a @ stock (890/1375)


11.1a @ stock (890/1375)

 

[Dave76]

Oh sure, bring that up

Thanks alot, tw33k, now I'll have to try it

 

[brianzion]

CCC Driver Details :ar: CCC Driver Details | AMD Developer Central

 

[Zardoc]

You don't have the 11a numbers.

I tried gpuclean, the 11a drivers, Von mod capswitcher (dummy cap), vontweaks and I must say, I have very stable drivers with crisp clean image.

 

[Chiumiento]

It still shows what CCC version it is as well as the driver versions, it just doesn't show the Catalyst version. Heck if you wanted to you could make it say anything you wanted too,

just find that line in the WHQL set or add it to the hotfix and add the version number yourself, or make it say anything you want it too as it has no affect on how anything works.[/QUOTE]

So What this means is I do have 11.1 even though it still says 10.12. I know that I installed it and I do have the new version of CCC. It just has not changed to 11.1 is all. Right? Or am I wrong? If I am wrong, Do I need one of the hot fixes & witch one?

 

[stormy13]

It just has not changed to 11.1 is all. Right?

Correct.

 

[Chiumiento]

It just has not changed to 11.1 is all. Right?

Correct.

Okay, Thank you understood.

 

[brianzion]

hi all

have been looking at the latest ccc and i ran it for compatibility problems and this is the results i get i have posted in the snapshots it directs to run in xp service pack 2?

** UPDATE ** this has been solved now after reinstalling and making sure i ran in admin rights it now runs in windows 7 64 bit.

 

[brianzion]

Anyone one else notice there a slight delay when right clicking on the desktop with the last two driver updates with the new control panel?

I was having problems with my system and thought the delay was just another issue so I wound up reinstalling the OS. Anyways to make a long story short there was no delay prior to installing the Catalyst drivers. Now that the drivers are installed there is this short delay again, I'm thinking it has something to do with the new control panel.




The other reason I think it's the control panel is because Windows installed some of my drivers including the video card drivers during install and there was definitely no delay when right clicking the desktop, but again, now that the full catalyst package is installed, the delay is there. Never had this with the old panel.

Anyone else have or notice this?

Thanks.

@sygnus21

i think i have the answer why there is delay and the ccc icon in the notification area disappears. in the ccc main window under preferences there is a setting called FOLLOW WINDOWS SCHEME make sure this is UN-TICKED and then the icon stays in the notification area and no delay.

 

[sygnus21]

@sygnus21

i think i have the answer why there is delay and the ccc icon in the notification area disappears. in the ccc main window under preferences there is a setting called FOLLOW WINDOWS SCHEME make sure this is UN-TICKED and then the icon stays in the notification area and no delay.

Nope.... the delay is still there when right clicking the desktop or items on the desktop. I've pretty much chalked it up to that's the way the new CCC2 works.

BTW that item was already un-ticked by default. I ticked it just to see, and again, no affect.

Also I don't have the disappearing icon some have reported so....

Thanks.

 

[Chiumiento]

@sygnus21

i think i have the answer why there is delay and the ccc icon in the notification area disappears. in the ccc main window under preferences there is a setting called FOLLOW WINDOWS SCHEME make sure this is UN-TICKED and then the icon stays in the notification area and no delay.

Nope.... the delay is still there when right clicking the desktop or items on the desktop. I've pretty much chalked it up to that's the way the new CCC2 works.

BTW that item was already un-ticked by default. I ticked it just to see, and again, no affect.

Also I don't have the disappearing icon some have reported so....

Thanks.

Have you tried changing your windows theme to basic not using aero just for the heck of it? Or what about changing your appearance performance options. Try setting them to a higher performance setting. See if it works better from doing little things like that. You could even try to change your power settings to high performance. If you try these things and it works. I would not blame CCC2 I would blame the overall performance of your PC. This is just a thought. Might help probably not. But go ahead and give it a shot.