Leadtek Winfast TV2000XP RM Drivers ?

[iron2000]

No problem
Glad that it solved your problem.

 

[Deanos]

Hi guys,

I have read this whole post and I am still a bit confused on which drivers to use...

I have the Winfast TV2000 Deluxe.
I have just installed Win 7 64bit and would love to get my TV working again...

I have downloaded every file I found in this thread, but I am unsure of which is the correct one to use....

Please help me.

Oh, will the PVR2 thingy still work in X64?

Thanks in advance.

 

[iron2000]

Not sure about PVR2 as TV is not my main use for the card, but I got my Winfast TV2000XP RM(same chipset as Deluxe) installed in Win7 Pro x64 with this unofficial driver.

I talked about it here.

 

[Deanos]

Thanks for the quick response!

I will give it a go tonight...

 

[Deanos]

No luck!

Installed everything as specified, but the TV Tuner still does not work...

Any suggestions?

 

[iron2000]

Hmm, I looked around and it seems that the driver does not support the tv tuner component of the card:
TV-Cards.com / How to run Leadtek Winfast TV 2000 XP RM under Windows XP x64?

 

[TimStitt]

Hi guys,

I have read this whole post and I am still a bit confused on which drivers to use...

I have the Winfast TV2000 Deluxe.
I have just installed Win 7 64bit and would love to get my TV working again...

I have downloaded every file I found in this thread, but I am unsure of which is the correct one to use....

Please help me.

Oh, will the PVR2 thingy still work in X64?

Thanks in advance.

Hi Deaos,

Did you ever work out which were the correct drivers for your device (and which chip it uses?).

The PVR2 is a must for 64bit, I've read-up a bit on this and the original PVR is unstable. I run PVR2 with XP SP3 compatibility and admin privileges.

 

[Deanos]

I got it working and it works very nice!

Check this thread...

http://www.sevenforums.com/drivers/82012-leadtek-winfast-tv-2000-xp-deluxe-windows-7-pro-64-b.html

Please, read everything VERY carefully and follow everything that I did... It works 100%!!!

Also note: This is ONLY for the Winfast TV2000 XP Deluxe card! I am not sure if it will work with others, but it should...

Have fun!

 

[iron2000]

So its Dscaler.
lol, using Dscaler here too but not to watch TV.

 

[Deanos]

It solved my problem!

I can watch TV just fine!

LOL... Took a while to configure everything though!

I must admit, it isn't 100%, but I think it is more a problem with my sound drivers than anything else now...

Oh well, just glad it works now!

 

[TimStitt]

So you pretty much used descaler and took Iron2000's advice? Was there anything additional in the ini file that may be useful to add to this thread?

 

[Deanos]

If you have the Winfast TV2000XP Deluxe card, then just follow the instuctions in my other thread mentioned on the previous page.

The ini file must be exactly as I mentioned there...

 

[TimStitt]

No I don't have that card (re: the first page of this thread)..... I rewrote the inf's for my card and explained how to some time last year. I'm simply here to help and also double checking if you have any new information so I can add it and attribute it to the author. The three Winfast blogs that I am involved in on this forum are by far the busiest and constantly get re-hits. Iron2000 has done the brunt of the work and managed to solve all the questions that we've come across with the same chip as yours (and been super busy). Where-as I've looked after the other chips and sound issues (more or less anyway and with plenty of exceptions)... but I'm always after more information.

So from your other post here.... http://www.sevenforums.com/drivers/82012-leadtek-winfast-tv-2000-xp-deluxe-windows-7-pro-64-b.html
......and in case new readers find this. Here's your suggested ini details.

----------------------------------------------------------
Check your Bt848.inf file and make sure it is set like this:

HKR,"DriverData","Card",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","Tuner",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","HasTDA9855",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","TVTunerDoesFM",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","TVAudioUsedForFM",0x00010001, 0x01, 0x00, 0x00, 0x00
---------------------------------------------------------------

Cheers

Tim

 

[violetblood]

After many attempts and many softwares installed and uninstaled i managed to get image from tv tuner.
I have a Winfast TV 2000 XP RM on Windows 7.
Now there's another issue, there's no sound.

 

[TimStitt]

Hello Violetblood,

Are you using the onboard sound card? if so it is likely that the realtek drivers are not loaded, please get them from your Mobo CD or here MSI Global. The default drivers installed by Microsoft work for almost everything else, but some users need the correct drivers from the manufacturer to get the sound working with their TV200XP.

Let me know the results.

Tim

 

[violetblood]

I installed the latest audio driver for my motherboard and it's the same.

 

[Deanos]

After many attempts and many softwares installed and uninstaled i managed to get image from tv tuner.
I have a Winfast TV 2000 XP RM on Windows 7.
Now there's another issue, there's no sound.

Hi,

Not sure about your card, but I noticed in your screen shot that it doesn't show Line In...

It is possible that it is just disabled. Common thing...

-- Right click on the speaker icon next to the time
-- Select Recording Devices
-- Right click on that screen and select Show Disabled Devices
-- If it is Disabled, Right click it and select Enable

Now, start the TV again and check in sound options, it should be there now...

Let us know if you come right with it.

 

[violetblood]

If i plug the speakers in and tell it it's the Line In then i have no sound on pc at all.
In the pic i removed it but it didn't work.

 

[violetblood]

Please help.

 

[TimStitt]

Hi Violet,

Could you please let me know the version of the sound driver that you are using?

Also, take a look at my post here about sound settings in the PVR2000, this card is very similar and the configuration is exactly the same. http://www.sevenforums.com/drivers/24790-leadtek-winfast-pvr2000-rtm-driver-2.html

What's important is to check that the devices that youa re going to use work and are enabled in Windows 7 first, tick that box and then configure them in the PVR second.