Solved No display on system startup

Flar

alphabet soup
Local time
1:18 AM
Messages
14
I'ts been going on for a while now couldn't say exactly how long (1 year+?)... But for the most part when I turn my computer on nothing will be displayed (no signal either) and if it gets to the windows log in screen (can tell based on the sound) I can unplug the DVI attached to my 4890 and plug it back in It'll work, but before that it won't (sometimes it'll work better for a while and usually worse after BSODs). It also seems I can't control anything before the log in screen if there's no display. The biggest issue with that is I get a lot of BSODs (which always say a different unrelated driver is to blame never the same one) and if I get a BSOD I have to select how to start windows, but since I can't control/select anything before the log in screen I end up having to repeatedly turn on and off my comp until I get a display (usually 30 times or so). I'm not sure if the BSODs and my display issues are connected or not, but I was thinking it might be my PSU crapping out or possibly my motherboard... Any help appreciated!
 

My Computer

OS
Windows 7 Professional 64bit
CPU
Phenom II x4 965
Motherboard
Asus m4a77td Pro
Memory
4 Gb 1600 mhz
Graphics Card(s)
XFX radeon hd 6850
Screen Resolution
1920x1080
PSU
Xion 700w
Case
PSI Cyclone
Hello,

I had a similar issue (though not as severe) whilst using an ECS (Especially Crappy Stuff) motherboard (which had onboard VGA) and a graphics card. Once I installed the graphics card I couldn't see anything on the screen until the Windows logon prompt came up!

To configure the card I first had to go into the BIOS with the card disconnected, setup the BIOS, as if a card was connected - shut down, install the card, then start up! Long story short not an ideal arrangement, but I have no doubt the motherboard was at fault.

Have a look to see if you have an ECS motherboard, if you do take it out of your computer, throw it on the ground, get a hammer, smash the board, pour flammable liquid onto the board - set afire, etc!!!

But really if you have a graphics card installed but your motherboard has VGA onboard I suggest taking out the card and seeing how the computer behaves. In all likelihood it is the motherboard, but there is a small chance that the graphics card is causing you some grief!

Good luck

Davo
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Velocity
OS
Windows 7 (XP, by Virtualization)
CPU
Intel i7 3820 (@ 3.6GHz)
Motherboard
Gigabtye X79-UP4
Memory
16 Gig DDR3 2133 (overclocked @ 2933MHz - 22GB/s)
Graphics Card(s)
ATI Radeon HD7800
Monitor(s) Displays
3
Screen Resolution
6400 x 1440 (3 Monitors, 1 Extra High Def!)
Hard Drives
500G SSD RAID 0 (Seq Read @ 889MB/s | Seq Write @ 844MB/s)
PSU
700 Watt
Case
Thermaltake
Keyboard
Microsoft
Mouse
Logitech
Internet Speed
20Mbps
Antivirus
AVG Internet Security Business Edition
Browser
Chrome
Other Info
7.7 on the Windows 7 INDEX! Not quite 7.9!!!
Well my motherboard is MSI, but I do have onboard VGA so I'll have to try that


[edit] I guess I lied, I thought I did but I guess not. just a male vga port, which I honestly don't know what that's even for =/

[edit] Sorry just remembered my mobo is Asus, my laptop is MSI!
 
Last edited:

My Computer

OS
Windows 7 Professional 64bit
CPU
Phenom II x4 965
Motherboard
Asus m4a77td Pro
Memory
4 Gb 1600 mhz
Graphics Card(s)
XFX radeon hd 6850
Screen Resolution
1920x1080
PSU
Xion 700w
Case
PSI Cyclone
turned out to be the gpu and I RMA'd it
 

My Computer

OS
Windows 7 Professional 64bit
CPU
Phenom II x4 965
Motherboard
Asus m4a77td Pro
Memory
4 Gb 1600 mhz
Graphics Card(s)
XFX radeon hd 6850
Screen Resolution
1920x1080
PSU
Xion 700w
Case
PSI Cyclone
Back
Top