nvidia crash

[riclx]

bios updated, Windows 7 64 installed.
the thing is that when i install nvidia driver 257.21 whql, after the install, pc restarts, but as soon as come out the win logo, display starts to flash, blue screen comes out, with the indication of display driver error.

the configuration i have now is
mobo asrock, alivecfire esata 2 r3.0 amd chipset
cpu amd phenom II 955
graphic gt220 nvidia
6 gb ram

please give a little help, its been days that i m stuck on this

with the standard vga it starts... and everything..
but as soons as i install the nvidia driver it happens what i describe above...
i have to enter safe mode... desinstall the nvidia driver... to start again,,,,

when desinstall the driver, this error comes up...
the situation happens with all nvidia driver versions.


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 3082
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8006EF74E0
BCP2: FFFFF88004771220
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\061910-21968-01.dmp
C:\Users\Ricardo\AppData\Local\Temp\WER-34625-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

 

[riclx]

http://www.sevenforums.com/hardware-devices/77718-gpu-nvidia-drivers-please-help-9.html#post795973

 

[pebbly]

http://www.sevenforums.com/hardware-devices/77718-gpu-nvidia-drivers-please-help-9.html#post795973

riclx , you have to post the dump file , read and follow the tutorial i posted for you

 

[riclx]

it tells me i dont have access to theese files...

 

[ttran]

@riclx: did you log in computer as administrator?

 

[brianzion]

i have had the same sort of problems with the nvidia updates for the card i have and i noticed in the change log on there site there is not a lot of changes that affect the card GeForce GT 220 i have the same (64BIT windows) so i rolled back the driver and no probs since. http://www.nvidia.co.uk/object/win7-winvista-64bit-257.21-whql-driver-uk.html




Version:
257.21 WHQL
Release Date:
2010.06.15
Operating System:
Windows Vista 64-bit, Windows 7 64-bit
Language:
English (UK)
File Size:
155 MB


RELEASE HIGHLIGHTSSUPPORTED PRODUCTSADDITIONAL INFORMATION
This is the first driver release from the Release 256 family of drivers (versions 256.xx to 259.xx). This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs. Learn more about Release 256 drivers here .

New in Version 257.21

Adds support for Blu-ray 3D with NVIDIA 3D Vision technology. Learn more about the hardware and software requirements here .
Increases performance for GeForce GTX 400 Series GPUs in several PC games. The following are examples of some of the most significant improvements measured with GeForce GTX 480. Results will vary depending on your GPU and system configuration:
Up to 14% in Aliens vs. Predator (1920x1200 noAA/AF – Tessellation on)
Up to 4% in Batman: Arkham Asylum (1920x1200 4xAA/16xAF PhysX=High)
Up to 5% in BattleForge (1920x1200 4xAA/16xAF – Very High settings)
Up to 5% in Call of Duty: Modern Warfare 2 (1920x1200 4xAA/16xAF)
Up to 4% in Crysis: Warhead (1920x1200 4xAA/16xAF – Enthusiast setting)
Up to 24% in Enemy Territory: Quake Wars (1920x1200 no AA/AF)
Up to 9% in Far Cry 2 (2560x1600 8xAA/16xAF)
Up to 25% in Just Cause 2 (2560x1600 no AA/AF - Concrete Jungle)
Up to 7% in Metro 2033 (1920x1200 no AA/16xAF – Tessellation on)
Up to 40% in Metro 2033 with SLI ((1920x1200 4xAA/16xAF – Tessellation on)
Up to 8% in S.T.A.L.K.E.R.: Call of Pripyat (1920x1200 no AA/AF – Day)
Up to 110% in Stone Giant with SLI (2650x1600 – Tessellation on, DoF on)
Up to 6% in The Chronicles of Riddick: Dark Athena (2560x1600 no AA/AF)
Up to 9% in Unigine: Tropics (2560x1600 no AA/AF – OpenGL)
Up to 5% in 3DMark Vantage (Performance and Extreme Presets)
Up to 19% with Transparency AA (1920x1200 4xTrSS – measured in Crysis)
Upgrades PhysX System Software to version 9.10.0223.
Adds support for OpenGL 4.0 for GeForce GTX 400 Series GPUs.
Adds support for CUDA Toolkit 3.1 which includes significant performance increases for double precision math operations. See CUDA Zone for more details.
Adds support for new extreme Antialiasing modes for 3-way SLI PCs, including up to SLI48x AA for GeForce 200 series GPUs and up to SLI96x AA for GeForce GTX 400 series GPUs.
Adds support for a new ‘Quality’ mode for NVIDIA’s Ambient Occlusion control panel feature.
Adds a new NVIDIA Control Panel setup page for SLI and PhysX for ultimate control over multi-gpu configurations.
Adds a new NVIDIA Control Panel feature for ultimate control over CUDA GPUs, allowing the user to effectively choose which GPU will power each CUDA application.
3D Vision customers can download the v257.21 3D Vision drivers here.
Includes numerous bug fixes. Refer to the release notes on the documentation tab for information about the key bug fixes in this release.
Additional Information:

Installs HD Audio driver version 1.0.9.1 (for supported GPUs).
Supports the new GPU-accelerated features in Adobe CS5.
Supports GPU-acceleration for smoother online HD videos with Adobe Flash 10.1. Learn more here.
Supports the new version of MotionDSP's video enhancement software, vReveal, which adds support for HD output. NVIDIA customers can download a free version of vReveal that supports up to SD output here.
Supports DirectCompute with Windows 7 and GeForce 8-series and later GPUs.
Supports OpenCL 1.0 (Open Computing Language) for all GeForce 8-series and later GPUs.
Supports OpenGL 3.3 for GeForce 8-series and later GPUs.
Supports single GPU and NVIDIA SLI technology on DirectX 9, DirectX 10, DirectX 11, and OpenGL, including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards.
Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.

 

[riclx]

thanks, but that driver doesnt work neither...

here are the dump files....

 

[brianzion]

have you tried to roll back the driver? using windows device manager?

 

[brianzion]

go to this link its a archive of the drivers for the card

NVIDIA Driver Downloads - Advanced Search

 

[riclx]

done that...

 

[brianzion]

Release Date
GeForce/ION Release 256 WHQL 257.21 15.6.2010
GeForce/ION Release 256 BETA 257.15 24.5.2010
GeForce Release 197 BETA 197.57 3.5.2010
GeForce Release 197 WHQL 197.45 13.4.2010
GeForce/ION Release 197 WHQL 197.13 25.3.2010
GeForce/ION Release 197 BETA 197.25 23.3.2010
GeForce/ION Release 197 BETA 197.13 17.3.2010
GeForce/ION Release 196 BETA 196.34 27.1.2010
GeForce/ION Release 196 WHQL 196.21 19.1.2010
GeForce/ION Release 195 BETA 195.81 15.12.2009
GeForce/ION Release 195 WHQL 195.62 26.11.2009
GeForce/ION Release 195 BETA 195.39 30.10.2009
GeForce/ION Release 191 WHQL 191.07 5.10.2009
GeForce/ION Release 191 BETA 191.03 25.9.2009
GeForce/ION Release 190 WHQL 190.62 21.8.2009
GeForce/ION Release 186 WHQL 186.34 17.7.2009

NVIDIA Recommended
WHQL WHQL Certified
BETA Beta Release

 

[brianzion]

mmm well i will email my tech mate for you, what driver have you got installed can you run in safe mode?

 

[brianzion]

Troubleshooting

Troubleshooting

Tech Support

Corrupt Screen after Windows loads

Update System BIOS: contact your Reseller or System Builder.
Update Bus Master Drivers: contact your Reseller or System Builder.
Download the latest AGP Drivers: contact your Reseller or System Builder.
Download the latest Driver.

System locks when Windows loads

Ensure BIOS settings are correctly. Try enabling/disabling these as indicated (some options may not be available on your system BIOS – refer to the system manual for more information).
Video Bios Shadow
Video Bios Cacheable
System Bios Cacheable
C8000 xxxxx Shadow **Try disabling these values**
Peer Concurrency PCI Streaming
Assign IRQ To VGA **Must be enabled**
VGA Palette Snoop **This must be disabled**
Reset Config Data
Enable ESCD
Power Management **Try disabling this**
Virus Checking **Try disabling this**
AGP Aperture set this to 64MB. If you have this much RAM or less, set it to half of the system RAM.
AGP Turbo **Try disabling this if there are problems with the card**
AGP Fast Writes **Try disabling this if there are problems with the card**
VGA boot from **Set to AGP instead of PCI**

Make sure that there are no other graphics cards or onboard graphics chips in your system. If possible, boot up in Safe Mode and then remove and reinstall the Detonator drivers.
Make sure that you have the latest motherboard drivers and BIOS. These can be obtained from your motherboard manufacturer.
Make sure that the AGP slot conforms to the AGP 2.0 specification, especially in terms of power coming through the AGP slot. Check with your motherboard manufacturer.
Disable sidebanding.
Are you overclocking either the Graphics Card or CPU? If you are, try resetting them back to their normal value, if it fixes the problem, you may need more cooling in your system.
Have you got an IRQ conflict with Graphics Card and another card in your system? The only device that can have the same IRQ is the 'IRQ Holder for PCI Steering'. If so, try assigning a different IRQ to that slot in the BIOS.
More Detailed Tech Support

Locate and contact your Reseller, System Builder, and Add-In Card Manufacturer, via our Where to Buy.

 

[brianzion]

Read the user manual

Tech Support

Read the user's manual

Many troubleshooting questions can be answered by the User Manual, which has been written specifically with the end-user in mind. If you have not got your manual, you may be able to download it from the Reseller, System Builder, or Add-In Card Manufacturer website. Contact your Reseller, System Builder, or Add-In Card Manufacturer for any additional information.


Blank Screen at Boot-up

Make sure your monitor cable is firmly connected to the card. A blank screen at boot-up is an indication that the system has not properly recognised the card (usually accompanied by 1 long and 2 short beeps). To resolve the problem, 1st make sure the card is fully seated in the slot and, 2nd check that your system meets the product system requirements.

Corrupt Screen at Boot-up

Make sure your monitor cable is firmly connected to the card.
Make sure the card is properly recognised by the system.
Make sure you have removed all the old graphics card drivers.
Make sure you have the correct monitor drivers.
Check the screen resolution and refresh-rate.
If the corrupt screen appears at boot-up before Windows loads, check the following BIOS settings: (try enabling/disabling these as indicated - some options may not be available on your system BIOS – refer to the system manual for more information).
Video Bios Shadow
Video Bios Cacheable
System Bios Cacheable
C8000 xxxxx Shadow **Try disabling these values**
Peer Concurrency PCI Streaming
Assign IRQ To VGA **Must be enabled**
VGA Palette Snoop **This must be disabled**
Reset Config Data Enable ESCD Power Management **Try disabling this**
Virus Checking **Try disabling this**
AGP Aperture set this to 64MB. If you have this much RAM or less, set it to half of the system RAM.
AGP Turbo **Try disabling this if there are problems with the card**
AGP Fast Writes **Try disabling this if there are problems with the card**
VGA boot from **Set to AGP instead of PCI**

 

[riclx]

mmm well i will email my tech mate for you, what driver have you got installed can you run in safe mode?

on safe mode whats the diference?
doesnt safe mode deactivates any driver?

 

[riclx]

Read the user manual

Tech Support

Read the user's manual

Many troubleshooting questions can be answered by the User Manual, which has been written specifically with the end-user in mind. If you have not got your manual, you may be able to download it from the Reseller, System Builder, or Add-In Card Manufacturer website. Contact your Reseller, System Builder, or Add-In Card Manufacturer for any additional information.


Blank Screen at Boot-up

Make sure your monitor cable is firmly connected to the card. A blank screen at boot-up is an indication that the system has not properly recognised the card (usually accompanied by 1 long and 2 short beeps). To resolve the problem, 1st make sure the card is fully seated in the slot and, 2nd check that your system meets the product system requirements.

Corrupt Screen at Boot-up

Make sure your monitor cable is firmly connected to the card.
Make sure the card is properly recognised by the system.
Make sure you have removed all the old graphics card drivers.
Make sure you have the correct monitor drivers.
Check the screen resolution and refresh-rate.
If the corrupt screen appears at boot-up before Windows loads, check the following BIOS settings: (try enabling/disabling these as indicated - some options may not be available on your system BIOS – refer to the system manual for more information).
Video Bios Shadow
Video Bios Cacheable
System Bios Cacheable
C8000 xxxxx Shadow **Try disabling these values**
Peer Concurrency PCI Streaming
Assign IRQ To VGA **Must be enabled**
VGA Palette Snoop **This must be disabled**
Reset Config Data Enable ESCD Power Management **Try disabling this**
Virus Checking **Try disabling this**
AGP Aperture set this to 64MB. If you have this much RAM or less, set it to half of the system RAM.
AGP Turbo **Try disabling this if there are problems with the card**
AGP Fast Writes **Try disabling this if there are problems with the card**
VGA boot from **Set to AGP instead of PCI**

i will try these bios configuration today and tell you something this afternoon..
thanks mate

 

[Tews]

mmm well i will email my tech mate for you, what driver have you got installed can you run in safe mode?

on safe mode whats the diference?
doesnt safe mode deactivates any driver?

No... safe mode only loads the minimum drivers needed to run the OS....

 

[riclx]

Read the user manual

Tech Support

Read the user's manual

Many troubleshooting questions can be answered by the User Manual, which has been written specifically with the end-user in mind. If you have not got your manual, you may be able to download it from the Reseller, System Builder, or Add-In Card Manufacturer website. Contact your Reseller, System Builder, or Add-In Card Manufacturer for any additional information.


Blank Screen at Boot-up

Make sure your monitor cable is firmly connected to the card. A blank screen at boot-up is an indication that the system has not properly recognised the card (usually accompanied by 1 long and 2 short beeps). To resolve the problem, 1st make sure the card is fully seated in the slot and, 2nd check that your system meets the product system requirements.

Corrupt Screen at Boot-up

Make sure your monitor cable is firmly connected to the card.
Make sure the card is properly recognised by the system.
Make sure you have removed all the old graphics card drivers.
Make sure you have the correct monitor drivers.
Check the screen resolution and refresh-rate.
If the corrupt screen appears at boot-up before Windows loads, check the following BIOS settings: (try enabling/disabling these as indicated - some options may not be available on your system BIOS – refer to the system manual for more information).
Video Bios Shadow
Video Bios Cacheable
System Bios Cacheable
C8000 xxxxx Shadow **Try disabling these values**
Peer Concurrency PCI Streaming
Assign IRQ To VGA **Must be enabled**
VGA Palette Snoop **This must be disabled**
Reset Config Data Enable ESCD Power Management **Try disabling this**
Virus Checking **Try disabling this**
AGP Aperture set this to 64MB. If you have this much RAM or less, set it to half of the system RAM.
AGP Turbo **Try disabling this if there are problems with the card**
AGP Fast Writes **Try disabling this if there are problems with the card**
VGA boot from **Set to AGP instead of PCI**

i will try these bios configuration today and tell you something this afternoon..
thanks mate

i dont have almost none of the options in my bios...
for the rest its all done

 

[brianzion]

mmm well i will email my tech mate for you, what driver have you got installed can you run in safe mode?

on safe mode whats the diference?
doesnt safe mode deactivates any driver?

yes sorry mate safe mode loads basic drivers have you tried the nvidia web site for help you see i had the same probs and like i said before i rolled back the driver and mine was ok also i have been informed the anti virus or internet suites can cause probs too. worth a check?

 

[riclx]

tryed that... didmt work