Random BSOD Error: Memory_management

[AbdoulIbrahim]

Not the first time
There's the file....Idk if anything else is needed let me know i'll be waiting .

 

[Arc]

Hi AbdoulIbrahim.

Test your RAM modules for possible errors.

How to Test and Diagnose RAM Issues with Memtest86+
​

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the result. If possible, a camera snap of the memtest86+ window before closing the program would be nice.
_____________________________________

BugCheck A, {8, 2, 0, fffff80003195b6b}

[COLOR=Red]Probably caused by : memory_corruption[/COLOR] ( nt!MiStoreSetEvictPageFile+b )

Followup: MachineOwner
---------

 

[AbdoulIbrahim]

ok cool I'll Run it Then show you

 

[AbdoulIbrahim]

I didn't finish the test yet ..But so far it's been giving me 29k Errors in 2 passes ...is this normal ?! or even close to normal ? it looks scary!

 

[NoelDP]

It is scary!
Even 1 error is one too many.
You need to check each stick on it own, and each slot on its own, to see whether it's a problem with the motherboard or the sticks themselves.

 

[AbdoulIbrahim]

Ok will try it and reply with the results ...cheers man

 

[Arc]

I didn't finish the test yet ..But so far it's been giving me 29k Errors in 2 passes ...is this normal ?! or even close to normal ? it looks scary!

I would suggest the same thing as Noel did.

Now follow the "Part 3: If You Have Errors:" of How to Test and Diagnose RAM Issues with Memtest86+

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.

If it is a bad RAM, you need to change the RAM. Take the other existing (good) RAM to the shop and get one of the exactly same specification. The best is, get a totally new RAM KIT.

If it is a bad slot, it is a motherboard issue. But changing the motherboard needs a preparation for most of us; so dont populate that slot for the time being.

 

[AbdoulIbrahim]

Ok here's what i did ...I tested 1/4 and it gave me LOADS O ERRORS ..didn't even pass the first pass and it had about 200 ....so it's corrupted ...
ran same test again in all slots ..same errors...
then ran 2/4 in the SAME SLOT and nothing ..all the way till pass 3
and same with 3/4 and 4/4 ..3 passes no errors ..I assume it's this last one that has the errors ..and it had alot!
I have it out now ..what do i do now ?! keep it out or smn has to be done ?!

At night i'll run one last with all 3 inserted "without the corrupted 4th one" and then leave it till the morning and see the 7 passes with what errors....
anything for now i gotta do ?

 

[AbdoulIbrahim]

Btw I got 2 RAMS Super talent and 2 kingston ...One super talent had the error and is the one i removed out

 

[NoelDP]

You should ONLY use matched RAM, if necessary - but hopefully, the changes here will be enough.
Now you have all/only the 'good' RAM installed - does this still pass a number of passes?

 

[AbdoulIbrahim]

well now I just ended it ..and it did (on all 3 good rams) 3 and 50% passes in 10 hrs like.

and I stopped it, No errors. should be grand ?

 

[Arc]

At lease 7 or 8 consecutive passes of memtest86+ gives a viable result. For less passes, the chance factor always remains.

But after using two RAM sticks of the same make/model (a RAM kit, preferably), use the computer normally. If the issue persists, let us know.

 

[AbdoulIbrahim]

Did 3 passes of the the 3 good rams for 10 hrs so i stopped it afterwards ..But no errors ..what do i do now ?

 

[Arc]

Did 3 passes of the the 3 good rams for 10 hrs so i stopped it afterwards ..But no errors ..what do i do now ?

Not 3 but two .... either the pair in green or the pair in blue. No mixing is healthy. Nobody will suggest you to do that.

Btw I got 2 RAMS Super talent and 2 kingston ...One super talent had the error and is the one i removed out

I would prefer Kingston, though. That is a better manufacturer.

 

[AbdoulIbrahim]

Ok so i had a BSOD again But not the memory this time ..and what happened was the following

1- the pc said Boot failure...and then booted again when I restarted.
2- and then this when booted https://gyazo.com/685768807649d61420e5db3bf23cc372
3- and this Gyazo - 15e2b8f9e1b0dc9ecf9805947265ac37.png


PS: I removed the Extra third Different RAM.

 

[Arc]

:ar: Blue Screen of Death (BSOD) Posting Instructions

 

[AbdoulIbrahim]

There

 

[Arc]

During the BSOD, three RAM modules were present in the system. Two 4 GB ones and one 2 GB one.

[Memory Device (Type 17) - Length 27 - Handle 001eh]
  Physical Memory Array Handle  001ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   2304 bits
  Data Width                    2180 bits
[COLOR=Red]  Size                          2048MB[/COLOR]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                A3
[COLOR=Red]  Bank Locator                  Bank6/7[/COLOR]
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         1333MHz

[Memory Device (Type 17) - Length 27 - Handle 001dh]
  Physical Memory Array Handle  001ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   2304 bits
  Data Width                    2244 bits
[COLOR=Red]  Size                          4096MB[/COLOR]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                A2
[COLOR=Red]  Bank Locator                  Bank4/5[/COLOR]
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         1333MHz

[Memory Device (Type 17) - Length 27 - Handle 001bh]
  Physical Memory Array Handle  001ah
  Memory Error Info Handle      [Not Provided]
  Total Width                   2304 bits
  Data Width                    2244 bits
[COLOR=Red]  Size                          4096MB[/COLOR]
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                A0
[COLOR=Red]  Bank Locator                  Bank0/1[/COLOR]
  Memory Type                   02h - Unknown
  Type Detail                   0000h -
  Speed                         1333MHz

So two things appears clearly.

1. First, you havent taken the suggestions given.
2. Second, even worst, there was an attempt to falsify the fact that you have taken the suggestions, by adding a PS; which is an attempt to misguide the helpers.

I will not waste my time where the given suggestions are not accepted. BSOD after following the given suggestions are always welcome, but not here, in this thread.

 

[AbdoulIbrahim]

1 - Why would i lie sir ?! I swear I have it Removed! I swear Even as am speaking now i removed them all! all 2 of them am only working with 2 only.

2 - I even threw them away ..The BSOD when it happened i just removed them idk how is it showing all 4 ..it's impossible ..they don't even exist lad! i threw them away!
i only have the 2 kingston ..why would i even lie


Maybe when i said PS i removed it ...I meant ATM ...Not while the BSOD happened ..so yea ..after i was told to remove the RAM's and then the BSOD's happened ...i then removed the RAM's ..so yea ..I didn't lie ..maybe i just didn't notice that it would be miss understood. But again as i said ..I wasn't lying ...Help me

 

[AbdoulIbrahim]

THey're both out look.

The Minute i read and posted a reply to your post ..So not even having any time to remove them ...Proves am not a liar yea ?