OK, I'm going to look back over this thread and see what has been done. I may ask you to do some things you have already done. Tell me again what happened when you ran both cards in both ports one at a time. Was there any difference and was the freezing still there? Also, go into bios and tell me the values of the +12V, +3.3V and +5V. Instead of filling this post with a bunch of code, I am just going to put it into one. I can post all the code if you want to see it, but this is what was blamed for the crash.
Code:
fffff880`0adb6b78 fffff880`00c1c44eUnable to load image [COLOR=red]amd_sata.sys[/COLOR], Win32 error 0n2
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
amd_sata
start end module name
fffff880`00c0f000 fffff880`00c27000 amd_sata T (no symbols)
Loaded symbol image file: amd_sata.sys
Image path: amd_sata.sys
Image name: amd_sata.sys
Timestamp: [COLOR=red]Wed Apr 11 09:40:24 2012[/COLOR] (4F8597D8)
CheckSum: 0001CAF9
ImageSize: 00018000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
fffff880`0adb9318 fffff880`01105d06Unable to load image amd_xata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for [COLOR=red]amd_xata[/COLOR].sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
amd_xata+0x1d06
amd_xata
start end module name
fffff880`01104000 fffff880`01112000 amd_xata T (no symbols)
Loaded symbol image file: amd_xata.sys
Image path: amd_xata.sys
Image name: amd_xata.sys
Timestamp: [COLOR=red]Wed Apr 11 09:40:27 2012[/COLOR] (4F8597DB)
CheckSum: 0000E9AF
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
fffff880`0adb9588 fffff880`0443a783Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for [COLOR=red]atikmpag[/COLOR].sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
atikmpag+0x3a783
fffff880`0adba7d8 fffff880`11403947Unable to load image [COLOR=red]atikmdag[/COLOR].sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x181947
Your graphics drivers crashed twice. What else did you have connected to the computer besides keyboard and mouse? It was Steam that looks like it crashed it.
open an elevated command prompt ( click start, type
cmd in the search box,
right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste
sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
If you don't already have it, please download and install
CPU-Z | Softwares | CPUID.
Post screenshots of the CPU tab, Mainboard, memory and spd tab for the dim slots with ram in them.
Also in bios what is the dram voltage set to? Also, do you have a spare hard drive that we can use?
Let's hope this helps
