Solved Running 3 monitors from graphics card using splitter "help"

[boafx]

I am trying to run 3 monitors from my graphics card, as listed in the specs, but it only picks up one of the monitors on the splitter the other just says no connection or signal. I am not even sure if it is possible to run 3 monitors?????

 

[Stevy22]

Welcome to Seven Forum :- Check this link boafxhttp://daggle.com/my-multimonitor-setup-three-screens-for-one-computer-76... You sure will get the help you need to connect 3 monitors to one computer. Let us know

 

[boafx]

It picks up all three monitors

In the graphics it picks up all three monitors but only displays 2. When I click on properties for the third monitors it shows the onboard graphics where the two that display show the Graphics card. even they are connected through a splitter to the graphics card.......Article didn't really help but thanks

 

[boafx]

Display port

Ok I found out that I can only run two monitors through the VGI or Hdmi. The third fourth and fith can be run through the Displayport.So I purchased the adaptor display port to VGA. now the graphics card picks up the display and says it there but the display says no signal.......help this is getting very fustrating

 

[Faladu]

3rd monitor might need the correct input type selected? (the monitor level, nothing to do with windows, just to be clear)

 

[boafx]

issue was the adaptor- dont buy cheap from ebay when it comes to adaptors. ebay £3.99 reputable supplier £18 big difference and a reason why