Setting up SSD for Windows

[themaverick]

I wish to install an SSD and put windows 7 64 bit on it. I don't have a cd/dvd copy of windows just the one on the recovery partition of my Dell Inspiron 580 1TB HD 8GB RAM.

Firstly is there more than one cable to connect from the SSD to the motherboard or two like normal HD's?

Secondly having fitted the SSD do I then boot up normally from my old HD and then somehow reinstall windows but selecting the SSD>?

Will all my old programs still launch from the old HD? Presumably would need desktop shortcuts creating?

Currently the PC is having a BSOD crash about three times a day, so thought this was a good move as it's always been slow and non-responsive even after clean windows re-installs.

Help much appreciated.

 

[DeaconFrost]

First, download an official .iso image for the version and platform of Windows 7 you have a license for. This way, you can do a clean install without the pre-installed bloat. Get your drivers from Dell as well, and put them on a flash drive.

The SSD installs the same way as any other hard drive. You may need to install it in a different slot or use an adapter, since they are smaller (2.5") as opposed to regular desktop drives (3.5"). To be safe, you could always unplug your existing hard drives, and then make sure the SSD is connected to the first, or primary SATA port.

You will need to reinstall your programs. Just have them handy for when your clean install is finished.

I would also focus on figuring out what is causing the BSoDs first. If it's something like bad memory, then those issues will follow you to a new install.

 

[ICIT2LOL]

Hum also mate have a look at http://www.sevenforums.com/tutorials/113967-ssd-alignment.html before you get going - if you haven't already.

 

[themaverick]

So would I contact Dell and ask them where I could download the iso? That sounds a hell of a challenge for a kick off - getting through to such an organisation!

 

[themaverick]

download an official .iso image
Aren't these dodgy copies then if they didn't come with my PC?

 

[Hopalong X]

It states "official" for a reason.
That is the only trust worthy site for Windows ISO downloads other than when you buy them from MS.

You can order the disks from Dell if you wish. The PC manufacturers usually charge about $25.

 

[whs]

So would I contact Dell and ask them where I could download the iso? That sounds a hell of a challenge for a kick off - getting through to such an organisation!

No need for Dell. Just download the .iso from the link that was given. That is perfectly safe. Then burn this .iso to a DVD with e.g. ImgBurn. Then you can install with that DVD.

If you make a fresh install, the alignment will be done by the installer.

 

[ICIT2LOL]

Hiyya maverick go with WHS mate as I tried a Vista ISO from Dell a while ago and it was rubbish!!

 

[bigmck]

I wish to install an SSD and put windows 7 64 bit on it. I don't have a cd/dvd copy of windows just the one on the recovery partition of my Dell Inspiron 580 1TB HD 8GB RAM.

Firstly is there more than one cable to connect from the SSD to the motherboard or two like normal HD's?

Secondly having fitted the SSD do I then boot up normally from my old HD and then somehow reinstall windows but selecting the SSD>?

Will all my old programs still launch from the old HD? Presumably would need desktop shortcuts creating?

Currently the PC is having a BSOD crash about three times a day, so thought this was a good move as it's always been slow and non-responsive even after clean windows re-installs.

Help much appreciated.

To help with your questions -- First, SSD's have the power cable and the motherboard cable just like a HHD. == Second, To reinstall Windows, put your DVD in the drive and boot. Unplug all HDD and only have your SSD pluged into the MB. Once Win 7 is installed, you HD will no longer boot. You will need to reinstall your programs on the SSD. Put you documents, pictures, music, etc on a HDD. This way will make your SSD work best. This tutorial will help a lot with your install.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

 

[kbrady1979]

These guys have it covered pretty well. There are some good tutorials on here that deal with a clean install of Win 7 on a SSD, I think they even gave you a link to one of them.

That being said, a little preparation goes a long way. If you have a Dell computer, go to Dell's website and enter your serial number or service tag for them to identify your computer. You may or may not have to pick what version of Windows you are needing drivers/updates for........ex Win 7 32-bit, Win 7 64-bit. When you do that, get a few drivers you know you will need. For sure you will need an updated graphics driver, one for your ethernet/network/lan so you can get on the internet, and probably the newest chipset driver. You can get by without all of them right now because you just need the main ones so you can navigate through the installation process. Put those drivers on a flash drive or w/e you want so they will be handy when you install Windows on your SSD.

When you go to install your SSD, make sure you unplug any other hard drives so it doesn't try to install any boot files on it. You don't have to worry about alignment because Win 7 does it for ya. Install Win 7 from the flash drive or disk you made and go through the process. After installation, manually install the drivers you downloaded from Dell's site. You should be ready to go through Windows Update and put the 100+ updates on your computer now. I always take this time to mention this: If you have a way of making an image of your OS configuration, now is the time to do it. I usually suggest making an image after installation is complete, right before any updates are installed. What this does is it gives you a good jumping off point in case something screwy happens and you have to reload windows. Instead, you wipe the drive clean and reload that image and you are ready to install updates and customize windows. You don't have to make an image, it is just a good idea to save some time later on if something happens.

Now you should be ready to download and install any programs/games/applications you want.



EDIT: One important thing I forgot to add.......when you install your SSD in your computer, BEFORE YOU START INSTALLING WINDOWS, go into your BIOS and make sure your SATA port is set to AHCI, not IDE. It should be fairly easy to find, but if you need further instructions, do a search on here for SATA AHCI and it should bring up several posts and probably a tutorial on it.

 

[ICIT2LOL]

Yeah agree with you KD and I always wipe any previously used drive first with the Partition Wizard and always use WHS's tutorial on preparing the SSD with all drives SSD or HDD http://www.sevenforums.com/tutorials/113967-ssd-alignment.html as I have probably already mentioned.

 

[bigmck]

Yeah agree with you KD and I always wipe any previously used drive first with the Partition Wizard and always use WHS's tutorial on preparing the SSD with all drives SSD or HDD http://www.sevenforums.com/tutorials/113967-ssd-alignment.html as I have probably already mentioned.

The OP is doing a Clean Install so no alignment is needed.

 

[themaverick]

Thanks for all the advice guys - just need the 3.5 ins cradle to arrive now. The iso download was set to take 3 hrs and the internet connect was lost with 40 mins to go - back to square one!

 

[ICIT2LOL]

Yeah agree with you KD and I always wipe any previously used drive first with the Partition Wizard and always use WHS's tutorial on preparing the SSD with all drives SSD or HDD http://www.sevenforums.com/tutorials/113967-ssd-alignment.html as I have probably already mentioned.

The OP is doing a Clean Install so no alignment is needed.

Yeah I know bigmck it is just a fussy thing that I do really so I cannot make any mistakes - pedantic you might call it LOL!!

 

[bigmck]

Thanks for all the advice guys - just need the 3.5 ins cradle to arrive now. The iso download was set to take 3 hrs and the internet connect was lost with 40 mins to go - back to square one!

Just curious what brand and how big your SSD is.

 

[themaverick]

OCZ AGT3-25SAT3-120G Agility 3 120GB SATA III 2.5 inch SSD

120 Gb

 

[bigmck]

OCZ AGT3-25SAT3-120G Agility 3 120GB SATA III 2.5 inch SSD

120 Gb

I have the OCZ Vertex 3 120GB. Very close to each other. Mine has worked just great. I am sure you will be pleased with it.

 

[themaverick]

Thanks - I'll let you know how it goes- I still don't understand how I can just download a free copy of windows - do I use my serial number )OEM) and won't it need activating - inwhich case won't microsoft just tell me this copy is already activated?

 

[bigmck]

Thanks - I'll let you know how it goes- I still don't understand how I can just download a free copy of windows - do I use my serial number )OEM) and won't it need activating - inwhich case won't microsoft just tell me this copy is already activated?

You have a sticker on your PC. It has a 25 Character Key on it. The sticker is not very big, about as big as three stamps. When you have installed Windows 7 and are happy with it (you have 30 days to test it out). You then input your Product Key (the 25 character one) into Windows and it is activated. You paid for Win 7 when you bought the PC. If you did not activate it, Microsoft would eventually find out and you would see a black screen one day. If you have a problem with the activation, let us know. Thanks,

 

[themaverick]

So thats different to the Product ID that I see when I right click on mt computer and the number is something loke xxxxx-OEMxxxxxx ?