Show Us Your Rig [8]

[ThrashZone]

Seeing the gpu hybrid cards have a 3 year warrantee they must be using a different type of liquid ?

Even the Corsair cpu coolers although I believe there warrantee is longer than that can't remember ;/

 

[NoN]

Done!

Took me all the afternoon, draining, un-mounting radiators, rinsed twice with pure water and drain again, cleaned some parts from residues and changed on Die (delidded) and on IHS thermal paste too. Moving this big heavy case around.

I inverted the tubing "Out to In radiator" from CPU cooler and "Out to In pump" from top radiator and resized the tubing, installed a higher Res Tank (120mm x 60mm) before was a 80mm.

On attached Pic, the coolant looks milky pink because of the tiny bubbles inside, the time the cooling system evacuate them. I've to place the Res Tank properly, on Pic it looks not straight.

Temps on desktop start are pretty stable but stay slight the same as before draining but are not raising anymore at load, might be also the time the thermal paste do its job!! Will have to check the thermal paste in two or three weeks if all is OK underneath.

Pretty happy of that, its my first full drain!

 

[ThrashZone]

Pretty in pink

 

[NoN]

Seeing the gpu hybrid cards have a 3 year warrantee they must be using a different type of liquid ?

Even the Corsair cpu coolers although I believe there warrantee is longer than that can't remember ;/

That might be, since its entirely sealed the coolant also could better protected and have a proper additive.

Pretty in pink

Eh! Took Pink because my soundcard have red leds, thought that match the color inside the case better than some uv Blue!

 

[boogieboy]

Done!

Took me all the afternoon, draining, un-mounting radiators, rinsed twice with pure water and drain again, cleaned some parts from residues and changed on Die (delidded) and on IHS thermal paste too. Moving this big heavy case around.

I inverted the tubing "Out to In radiator" from CPU cooler and "Out to In pump" from top radiator and resized the tubing, installed a higher Res Tank (120mm x 60mm) before was a 80mm.

On attached Pic, the coolant looks milky pink because of the tiny bubbles inside, the time the cooling system evacuate them. I've to place the Res Tank properly, on Pic it looks not straight.

Temps on desktop start are pretty stable but stay slight the same as before draining but are not raising anymore at load, might be also the time the thermal paste do its job!! Will have to check the thermal paste in two or three weeks if all is OK underneath.

Pretty happy of that, its my first full drain!

That's a Sexy Thing

 

[ThrashZone]

Almost too sexy

 

[NoN]

Almost too sexy

AH AH...! Missing some bottles of beers (Pink brewery) and black leather pants! Still enjoying pink?

 

[A Guy]

Good job NoN

A Guy

 

[essenbe]

Very nice job, NoN. Looks good.

 

[NoN]

Thanks guys, here the Temps i got at right now. It's Delta room 20°C here

 

[rvcjew]

Looks great NoN love the pink.

 

[linnemeyerhere]

Outstanding job with the rig NoN !

 

[NoN]

Looks great NoN love the pink.

Thanks, so do I!!

Outstanding job with the rig NoN !

It's no Acryl Tubing with those straight lines it gives, but it works fine for cooling that CPU!

Remain a bit messy with cable managements, will do when courage found. I've to tight some around!

 

[GokAy]

Nothing fancy, can't get that cable management right, some are just too short, the rest I need to redo some

The insides:




The other side:


3x (1920x1080) displays:


5910x1080 Surround (with bezel correction):

 

[Lady Fitzgerald]

I wouldn't feel bad about the cable management. Some cases, like that one, just don't lend themselves to cable management. Just neaten up the cables a bit by bundling them together and move them as close to the MOBO plate as you can so they do not interfere with airflow as much and all will be good.

That's a nice workstation you have set up!

 

[Layback Bear]

Cable management is a art that doesn't take long to learn but forever to complete.

You must plan where every cable is intended to go and how you are going to route it.and change the length to match.
Making them all the same color is another time consuming project. It took me longer doing cable management on my last system than it would to build 5 systems without proper cable management.

There is 14 fans, 2 water pumps, a bunch of lights plus DVD, Hotswap bay for SSD and Hard Drive. Lot of wires.
My intent was to hide the wires from the window side of the case and run the wires level and plum on the back side.

 

[Lady Fitzgerald]

Jack isn't kidding about cable management taking forever to complete. But then, some of us are fanatics.

Btw, that looks slick as snot on a broom handle, Jack!

 

[Layback Bear]

Thank you lady. You well know it take many days not just a few hours.

By the way before you start pick up a quality solder iron. You will doing a lot of soldering and cable sleeving. A bottle of Old #7 help also.

I have a inspector that watches over my work.

 

[Lady Fitzgerald]

A kitty watching over a bear; I love it!

 

[OCIR]

ocirs new rig

what do yall think