Show us your Unigine Heaven benchmark scores!

[paulpicks21]

No worries

 

[essenbe]

Big difference. My 6950 almost wouldn't run it.

Ungine 3.0


Ungine 4.0

 

[paulpicks21]

Wow, looks a lot more demanding Steve, I will test on my card with lucid off when I get the time.

 

[essenbe]

I just ran it again with their presets for extreme. It runs it in windowed mode at 1600 X 900 When you do that you have no other options.

 

[glc]

I'll also try a custom bench. I just let it test on extreme. You can't see any of the settings though. No telling just how extreme it is. Has to work it pretty good I'm thinking,because my GPU temp got as high as 78C.

Greg

 

[Bungee18]

Thank you Paul!

 

[paulpicks21]

Thank you Paul!

Your more than welcome bungee, I look forward to your new scores, I will post mine soon.

 

[Bungee18]

Will post in a few minutes. Looking forward to your scores too!

 

[Bungee18]

Ok, so here are my scores with 4.0.
As Steve said, it seems to be much tougher on the GPUs.

4.0 no OC and OC'ed (everything set to max 1600x900)
3.0 same settings

Will give it one more try with their extreme preset with and without GPU OC and repost

@Paul, could you please run it at extreme preset so we can compare with Steve?

Cheers,

J

 

[paulpicks21]

First off, great scores Bungee!

Ok so I have to say the new version 4 is a lot more polished, it actually recognises my gpu instead of seeing it as Intel 4000 graphics, well actually it still sees that but also sees my gpu. I also like the new info on the right hand side when its running especially the GPU Temp, I did not exceed 59C during my testing which I am happy about.

Here is my results on the Extreme Preset that runs in windowed mode as Steve ran, this is with the GPU at stock settings.

Edited to add, the score is with Lucid turned off, with it turned on it actually scores slightly less. I guess its not optimised for the new version of Heaven.

 

[Bungee18]

Thanks Paul, yours too!

I believe the Extreme Preset has a bug. I get the exact same score by running it with CF enabled and disabled, and then I get a number twice as high when running everything set to max 1600x900, plus the scores running one card in Extreme Preset are the same ones when running one card everything set to max 1600x900.
It still sees the two cards, but doesn't use Crossfire.
So I guess the scores for the CF setup are the ones on the last attachment.

Anyone out there seeing the same issue with Crossfire?

Cheers,

J

 

[Bungee18]

It is not a bug. I wrote to Unigine support and this was their answer:

"HI Juan,
AMD CrossfireX technology is works only in full screen mode - it's not a bug. Please, use full screen mode to get correct results.
Thanks!"

Is this so for all applications or only for heaven?
I'm such a noob!

Cheers,

J

 

[logicearth]

This might not be all that grand of a score on my new computer...I got a score of 1207, avg. FPS of 47. On a Geforece GTX 690, stock speeds, no over clocking or modification of any kind. Running under DirectX 11 and Ultra with no Anti-Aliasing except for FXAA enabled in the Nvidia control panel. (Don't know if FXAA was actually used I cannot tell the difference.) While running under 2560x1600 fullscreen on my 30" monitor (U3011).

Turning the resolution down to 1920x1080 I average over 60 FPS. I normally play with vsync on so that is fine with me.

Intel Core i7-3930k, all cores turbo to 4GHz under load.
16GBs of 1600MHz of RAM in quad-channel config.
Geforce GTX 690, stock. (close to dual GTX 680s)
Samsun 830 256GB SSD.

 

[Britton30]

I know nothing about this stuff. this is a snip because the program wouldn't save a shot.
Is it crappy? Tell me it's real crappy.

 

[Solarstarshines]

I have 2 results one from Unigine Valley and the Other from Unigine 4 also the link to Valley http://www.sevenforums.com/overclocking-case-mods/278626-valley-benchmark-unigine.html

 

[Jerlys]

This is for a modest over clock,

 

[Bungee18]

Hey Tommy, very nice scores!
Can you run Heaven 4.0 at the extreme preset (1600x900 windowed) so we can compare results with Paul and Steve?
Cheers,
J

 

[essenbe]

Hey Tommy, very nice scores!
Can you run Heaven 4.0 at the extreme preset (1600x900 windowed) so we can compare results with Paul and Steve?
Cheers,
J

I'm not sure how you can compare his 2 X 7970's with my 1 6950. Sounds like an unfair fight to me.

 

[essenbe]

Here's my Valley benchmark with the 6950

 

[Solarstarshines]

well you called for the rain here it comes