Startup Sound - Change in Windows 7

How to Change the Windows 7 Startup Sound​

   Information

This will show you how to change the Windows 7 startup sound, not the "Windows Logon" sound, to any WAV file of your choice.

You must be logged in as an administrator to be able to do the steps in this tutorial.

   Note

If you run a sfc /scannow command, then you will lose all changes made to the system file in the tutorial below since it and all other system files will be restored back to default by the command.

   Warning

Making a mistake while modifying system files can render your Windows 7 installation unusable. To be safe, you should create a restore point before doing this tutorial in case you need to do a system restore at boot using the restore point to undo any mistakes that may be made.

   Tip

If you like, here are the Startup Sounds from previous Windows releases.

Windows History: logos, bootscreens, startup sounds etc | Redmond Pie

OPTION ONE

To Change Startup Sound in Windows 7 using "Startup Sound Changer"

1. If you have not already, download the StartupSoundChanger.zip file for the free Startup Sound Changer program at the link below, and save it to your desktop.
NOTE: You will need to click on the grey download button at the program's site below. WinAero: Downloads / Software / Startup Sound Changer - change your Windows startup


2. Open the ZIP file, and extract (drag and drop) the StartupSoundChanger.exe to your desktop.

3. Run the StartupSoundChanger.exe file, and click on Yes when prompted by UAC.
NOTE: This is a standalone .exe file that does not install anything on your computer.

4. With "Startup Sound Changer" you can set a .wav file to replace the startup sound, play current startup sound, and restore the default startup sound. (see screenshot below)

OPTION TWO

To Manually Change Startup Sound in Windows 7

1. Do step 2 or 3 below for what you would like to do.

2. To Restore Default Startup Sound in Windows 7

   Note

If you lost your backup or didn't create one, then here's a copy of the default startup sound .wav file that you could use to restore it with using step 3 below.


Download

A) Copy the default backup imageres_original.dll file (step 3O below) to your desktop.

B) Right click on the imageres_original.dll file and click on Rename.

C) Rename it to imageres.dll and press enter.

D) Repeat steps 3Q to 3X below to restore this file.
3. To Change Startup Sound in Windows 7 A) In Windows Explorer, navigate to C:\Windows\System32\imageres.dll. (see screenshot below)
B) Right click on the imageres.dll file, and click on Copy. (see screenshot above)

C) Right click on your desktop, and click on Paste.

D) If you have not already, then download and install Resource Hacker.

E) Right click on the Resource Hacker shortcut in Start Menu - All Programs, then click on Run as administrator. (see screenshot below)
F) If prompted by UAC, then click on Yes.

G) In Resource Hacker, click on File and Open. (see screenshot below)
H) Navigate to and select the imageres.dll file copy on your desktop, and click on Open. (see screenshot below)
I) In the left pane of Resource Hacker, expand WAVE, and 5080, to 1033. (see screenshot below)
NOTE: If 5080 and 1033 is named something else, then that is fine as long as they are still under WAVE. Just substitute what you have instead in the steps below. You can click on the Play WAVE button to hear what the current startup sound is.
J) Right click on 1033 and click on Replace Resource. (see screenshot below)
K) Click on Open file with new resource. (see screenshot below)
L) Navigate to and select the .wav file that you want for the startup sound, and click on Open. (see screenshot below)
NOTE: This .wav file must be unblocked and remain at this same location. For example, move or copy the .wav into the C:\Windows\Media. If you move or delete this .wav file, the startup sound will no longer play it.
M) Under Resource Type, type WAVE. Under Resource Name, type 5080. Under Resource Language, type 1033. Click on the Replace button. (see screenshots below)



N) Click on File and Save, then close Resource Hacker. (see screenshot below)
NOTE: You can click on the Play WAVE button first to hear and verify what the current startup sound is set as in this file.
O) On your desktop, Move and Save the imageres_original.dll file to another safe location of your choice as a backup.

   Warning

THIS IS YOUR ONLY BACKUP OF THE ORIGINAL IMAGERES.DLL FILE WITH THE DEFAULT STARTUP SOUND.

P) Check to make sure that the Play Windows Startup sound is checked in Sound so that it is turned on. (see screenshot below)
Q) Restart the computer and boot into the System Recovery Options (WinRE) screen, then select the Command Prompt option and press enter.
NOTE: If you do not have a retail Windows 7 installation disc, then you can create a System Repair Disc to use to boot to the System Recovery Screen instead.
R) In the command prompt, type diskpart and press enter. (see screenshot below step 3V)

S) In the command prompt, type list volume and press enter. (see screenshot below step 3V)

T) Make note of what the drive letter is for your Windows 7 partition or drive. (see screenshot below step 3V)
NOTE: The Windows drive is not always C at boot. For example, mine is listed as D here. Look at the volume name and size to help you determine which letter is the one that you have Windows 7 installed on.

U) In the command prompt, type exit and press enter. (see screenshot below step 3V)

V) In the command prompt, type the command below and press enter. (see screenshot below)
NOTE: Substitute D in the command below with the drive letter you have listed in step 3T for your Windows 7, and substitute username in the command below with your user account name.

COPY /V /Y "[B][COLOR=red]D[/COLOR][/B]:\Users\[B][COLOR=red]username[/COLOR][/B]\Desktop\imageres.dll" "[B][COLOR=red]D[/COLOR][/B]:\Windows\System32"

W) Close the command prompt, and click on the Restart button. (see screenshot above)

X) As Windows 7 restarts, you will hear your new startup sound.

   Tip

If you ever wanted to change the startup sound again anytime after the first time you did this tutorial, you would only need to replace the .wav file at the exact same location in step 3L in Windows Explorer with a different .wav file that you want to use now instead, then rename the new .wav file with the exact same name as the old .wav file. No other steps would be required.

That's it,
Shawn

Related Tutorials

---

• How to Change the Event Sound Effects in Windows 7
• How to Enable or Disable the Startup Sound in Vista and Windows 7
• How to Allow or Prevent Changing Sounds in Windows 7
• How to Create a Custom Logon Sound that Speaks What You Like
• How to Change the "Welcome" Text Message at Log On in Windows 7 and Vista

 

[Brink]

Hello camoguy, and welcome to Seven Forums

Double check through all the steps to make sure that you didn't miss anything. It's not hard to do.

If you like, you might give OPTION ONE a try. It makes it easier to do for you.

 

[camoguy]

Thanks for the fast reply! I've gone through all the steps about 3 times now, and the first way doesn't work for me, it is still the default start up sound

 

[Brink]

You mean Option One didn't work for you as well?

Are you logged in as an administrator?

Starting at step 3Q, did you make sure that you were using the correct drive letter since the Windows drive is not always the C: letter at boot?

Please go ahead and upload your sound file in a ZIP file, and I'll do some testing with it on my system to see if it may be the issue.

 

[camoguy]

Yeah, option one said the sound was changed when i played it, but when i rebooted, default.
I am logged in as administrator.
My windows is installed on my C: drive, and i got no errors saying it could not find system 32

I would send you the sound, but it seems like the servers are down, its stuck on "Sending request to Sevenforums.com"
But, here's a YouTube link to the sound: Alienware Startup Sound - Epic Piano - YouTube
It's ~3mb in .wav format

 

[Brink]

As a test, do the tutorial again using another .wav file included in C:\Windows\Media to see if it may play at startup.

If it does, then there's an issue with your alienware .wav file.

 

[camoguy]

OH!... does the file HAVE to be in windows media? because mine is not

EDIT: tried what you said, still the default sound. I also tried it without safemode and all of that, and just copy and pasted the modified imageres from my desktop into system32, directly after i opened it with res hack and it was the default sound, not the ringout sound i set it to... so something is changing it the second it goes in

 

[Brink]

There's definitely a mistake being made somewhere, but just not sure where.

Do you have UAC enabled?

 

[camoguy]

Nope, my UAC is turned 100% off
Could my safe mode be buggy? I have a gigabyte motherboard and i have to basically crash my computer to give myself the option to boot in safe mode, f8 doesn't do anything and there's no other way to do it besides that, but it does go into safe mode

 

[Brink]

As a test, set UAC to at least default levels or above, restart the computer, and try the tutorial again.

 

[camoguy]

Still turns it into the default sound.
I'm thinking i may as well just leave it as the default sound, its becoming too big of a project and too much time just to change it

 

[Brink]

Odd. Did that happen with OPTION ONE as well still with UAC at max?

 

[camoguy]

Yep

 

[Brink]

I must admit that I'm stumped as for why it's not working for you.

 

[camoguy]

Yeah, beats me haha, ill just let it stay on default. Who hears my computer start up anyways...

 

[cytherian]

Camoguy, did you try using the Winaero Startup Sound Changer program?

 

[camoguy]

As said in my 2nd to last post, i did indeed try it. When i pressed play on the program, it was the song i wanted, when i booted up, it was default.

 

[Brink]

Camoguy,

If you decide to do so, then please feel free to ZIP your file and upload it. I'll be happy to test it on my system to see what the problem may be.

 

[RuffyGlory]

i have the same problem as Jepekaa93. I activate UAC setting. Any suggestions?

When i try to save the changes in ResHacker i get "Cannot rename original file. Saving cancelled", i am admin of computer, and run ResHacker as admin so i don't see why i can't save it. Also i cannot alter the "imageres.dll" directly. ResHacker zip is on desktop, and i have a copy of imageres.dll in desktop as well. Any suggestions?

 

[RuffyGlory]

i have the same problem as Jepekaa93. I activate UAC setting. Any suggestions?

When i try to save the changes in ResHacker i get "Cannot rename original file. Saving cancelled", i am admin of computer, and run ResHacker as admin so i don't see why i can't save it. Also i cannot alter the "imageres.dll" directly. ResHacker zip is on desktop, and i have a copy of imageres.dll in desktop as well. Any suggestions?

Thank you Brink for your brief explanatioan. my problem has been solved by take the owner ship imageres.dll

 

[carwiz]

As an update, I used Option One to verify that the link and program still worked for another thread. It didn't! The link worked but the utility reset all folder icons and cleared all the icons in my Control Panel. It also reset the Recycle Bin Icon. I haven't fixed the Recycle Bin icon yet but the other problems were fixed using SFC /scannow.

I ran the utility first with no changes. I simply viewed the "screen" and clicked on Play to hear the default sound. After that, I clicked Exit. I thought that I should try it since the tutorial was suggested in a post I made. I then ran the utility again but this time, I changed to a .wav I stored in the Media folder. I clicked on Play and it seemed to work. After a reboot, the problem showed up.