Stop code 7B / New PC - Old HDD

[someguynumba5]

So, a friend of mine just started building his new PC. I've been helping him every so often over the past 2 days with issues he has come across, as this is his first time. After about an hour of troubleshooting, I'm out of ideas as to what the issue/solution could be.

Steps taken so far:
- Everything is plugged in and connected correctly.
- HDD confirmed to work in 2 other PCs.
- Alternative SATA ports tested - same result
- Boot order is correctly booting from HDD
- Safe mode/Last known configuration result in same stop code.
- Start up repair makes the screen briefly go black, and then reloads the menu.
- No known viruses on HDD.
- BIOS was updated, and reverted, both resulting in the same stop code.
- CMOS cleared.

Partlist:
AMD FX 6300
Asus m5A97 R2.0
Ripjaws X 8GB DDR3 1600
WD Caviar Black 1TB - (old HDD)
R9 270x reference (I know)
Corsair CX 600W

As a side note, he has a USB drive and a fresh SSD, but no windows installation/repair disk.

 

[Layback Bear]

This tutorial by Brink needs completed on troubled computer.

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[someguynumba5]

This tutorial by Brink needs completed on troubled computer.

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

I did read that before posting, however, running a program on a computer that won't boot, is a bit difficult.

 

[Layback Bear]

So, a friend of mine just started building his new PC. I've been helping him every so often over the past 2 days with issues he has come across, as this is his first time. After about an hour of troubleshooting, I'm out of ideas as to what the issue/solution could be.

Steps taken so far:
- Everything is plugged in and connected correctly.
- HDD confirmed to work in 2 other PCs.
- Alternative SATA ports tested - same result
- Boot order is correctly booting from HDD
- Safe mode/Last known configuration result in same stop code.
- Start up repair makes the screen briefly go black, and then reloads the menu.
- No known viruses on HDD.
- BIOS was updated, and reverted, both resulting in the same stop code.
- CMOS cleared.

Partlist:
AMD FX 6300
Asus m5A97 R2.0
Ripjaws X 8GB DDR3 1600
WD Caviar Black 1TB - (old HDD)
R9 270x reference (I know)
Corsair CX 600W

As a side note, he has a USB drive and a fresh SSD, but no windows installation/repair disk.

Sorry but this post indicated the the system would boot.
--------------------------------
- No known viruses on HDD.
- Alternative SATA ports tested - same result

---------------------------------

***Do you or do you not get a BSOD?***

Here is a tutorial by gregrocker that should be very helpful.

http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html