bashes1
New member
Okay guys, this has me stumped.
I'm fixing a computer (Toshiba Satellite L500) for a friend because he uses Frostwire, he accidentally downloaded a hidden virus and it fried his HDD basically.
So the only option was to do a fully factory reset as this is an older Toshiba system and they didn't supply any restore disks -.-
So i into the Windows 7 restore wizard and it asks for an admin password, and i know what all the passwords are because i set up the computer for this bloke, so i call him up and he agrees that he's not changed any passwords so it must be this ridiculous virus screwing about.
I managed to get around this by a direct recovery to Windows Vista through a disk, installed vista and everything was going smooth. obviously there were not drivers installed but no need because i should now be able to restore the original windows 7 system through the hidden recovery partition on the HDD.
And i did, i went through everything fine, no admin passwords needed, then halfway through the Windows 7 recovery, it fails saying there is an error in the HDD...
I try to restore again and it prompts the message no bootloder. Then i try to recover to vista through disk, gets halfway through this installation and then fails...
Now it wont boot to anything (even a recovery) and prompts the message F2-F200-0002...
A bit of digging said this can be solved by holding 0 on boot-up, but 'no it can't' in this case.
Don't have recovery disks...
What do i do?
Thanks for your advice!
I'm fixing a computer (Toshiba Satellite L500) for a friend because he uses Frostwire, he accidentally downloaded a hidden virus and it fried his HDD basically.
So the only option was to do a fully factory reset as this is an older Toshiba system and they didn't supply any restore disks -.-
So i into the Windows 7 restore wizard and it asks for an admin password, and i know what all the passwords are because i set up the computer for this bloke, so i call him up and he agrees that he's not changed any passwords so it must be this ridiculous virus screwing about.
I managed to get around this by a direct recovery to Windows Vista through a disk, installed vista and everything was going smooth. obviously there were not drivers installed but no need because i should now be able to restore the original windows 7 system through the hidden recovery partition on the HDD.
And i did, i went through everything fine, no admin passwords needed, then halfway through the Windows 7 recovery, it fails saying there is an error in the HDD...
I try to restore again and it prompts the message no bootloder. Then i try to recover to vista through disk, gets halfway through this installation and then fails...
Now it wont boot to anything (even a recovery) and prompts the message F2-F200-0002...
A bit of digging said this can be solved by holding 0 on boot-up, but 'no it can't' in this case.
Don't have recovery disks...
What do i do?
Thanks for your advice!
My Computer
At a glance
Windows Vista 64 HP - Mac OS X 10.7.2Intel Core 2 Duo E85004gb Platinum DDR2Nvidia GTS250 (1GB)
- Computer Manufacturer/Model Number
- Custom :D
- OS
- Windows Vista 64 HP - Mac OS X 10.7.2
- CPU
- Intel Core 2 Duo E8500
- Motherboard
- Intel
- Memory
- 4gb Platinum DDR2
- Graphics Card(s)
- Nvidia GTS250 (1GB)
- Sound Card
- Sound Blaster Audigy
- Monitor(s) Displays
- 32" Toshiba 1080p
- Hard Drives
- Toshiba 1000GB
- PSU
- 800w
- Case
- Nvidia by CoolerMaster
- Cooling
- Arctic Cooling - Freezer Extreme (In Australia, it gets HOT)