FLaTLiN3D
New member
Hello everyone,
This evening I have been making some modifications to several computers. I have just installed a new graphics card into my computer, however I'm not sure if it's working properly. It could be the driver, however "Driver Genius" claims that it is up to date. I open Speccy and it says that my graphics card is only 4MB, I refuse to believe this, I believe that Driver Genius is incorrect.
Speccy Information:
What do you think? Part of the reason I don't believe this information is accurate is I don't think I would ever have a 4MB GFX card, and I found it in a box of my miscellaneous electronics.
Perhaps my integrated GFX card is interfering? I don't see how that would be an issue considering that my monitor is connected to the GFX card, not the integrated one. Though I'm not sure how things such as those work. Also when I try to change my resolution, I only get two options: 800x600, and 1024x768.
Any assistance would be appreciated,
FLaTLiN3D
DXDiag display information:
This evening I have been making some modifications to several computers. I have just installed a new graphics card into my computer, however I'm not sure if it's working properly. It could be the driver, however "Driver Genius" claims that it is up to date. I open Speccy and it says that my graphics card is only 4MB, I refuse to believe this, I believe that Driver Genius is incorrect.
Speccy Information:
Code:
Graphics
Monitor
Name SyncMaster on Standard VGA Graphics Adapter
Current Resolution 1024x768 pixels
Work Resolution 1024x740 pixels
State enabled, primary, output devices support, VgaCompatible
Monitor Width 1024
Monitor Height 768
Monitor Bpp 32 bits per pixel
Monitor Frequency 1 Hz
Device \\.\DISPLAY1\Monitor0
Standard VGA Graphics Adapter
GPU NV5
Device ID 10DE-0029
Revision 12
Subvendor Creative Labs (77A42149)
Technology 250 nm
Transistors 15 M
Release Date May 1999
DirectX Support 6.0
OpenGL Support 1.1
BIOS Version B1
ROPs 2
Shaders Vertex 2/Pixel 2
Memory Type SDR
Memory 4 MB
Bus Width 128 BitPerhaps my integrated GFX card is interfering? I don't see how that would be an issue considering that my monitor is connected to the GFX card, not the integrated one. Though I'm not sure how things such as those work. Also when I try to change my resolution, I only get two options: 800x600, and 1024x768.
Any assistance would be appreciated,
FLaTLiN3D
DXDiag display information:
Code:
---------------
Display Devices
---------------
Card name: Standard VGA Graphics Adapter
Manufacturer: (Standard display types)
Chip type: NVidia
DAC type: 8 bit
Device Key: Enum\PCI\VEN_10DE&DEV_0029&SUBSYS_10211102&REV_11
Display Memory: n/a
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1024 x 768 (32 bit) (1Hz)
Monitor Name: Generic PnP Monitor
Monitor Model:
Monitor Id:
Native Mode:
Output Type:
Driver Name: vga
Driver File Version: 6.01.7600.16385 (English)
Driver Version: 6.1.7600.16385
DDI Version: unknown
Driver Model: unknown
Driver Attributes: Final Retail
Driver Date/Size: 7/13/2009 19:25:51, 10752 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-4369-11CF-B332-912DBFC2CB35}
Vendor ID: 0x10DE
Device ID: 0x0029
SubSys ID: 0x10211102
Revision ID: 0x0011
Driver Strong Name: Unknown
Rank Of Driver: Unknown
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: n/a
DXVA-HD: n/a
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not AvailableMy Computer
At a glance
MS Windows 7 HP 64Bit
- Computer Manufacturer/Model Number
- Toshiba Satellite L675D-S7052
- OS
- MS Windows 7 HP 64Bit
- Internet Speed
- 2MB/s ↓
