GenRoss
New member
- Local time
- 8:00 PM
- Messages
- 29
Maybe a couple weeks ago I bought a usb 3.0 hard drive. At the time I didn't have any USB 3.0 ports, so I was limited to using in my 2.0 ports. Two days ago I got my hands on a USB 3.0 pci card.
I plugged everything in and installed the drivers and it worked great. However, now, when I turn my computer on in the morning the drive isn't automatically recognized. I have to replug the USB 3 cable into the card for it to be recognized.
If I turn the computer off for a short time period, like 5 minutes or so, then turn it back on, it usually is recognized.
Is there any solution to this kind of problem?
I plugged everything in and installed the drivers and it worked great. However, now, when I turn my computer on in the morning the drive isn't automatically recognized. I have to replug the USB 3 cable into the card for it to be recognized.
If I turn the computer off for a short time period, like 5 minutes or so, then turn it back on, it usually is recognized.
Is there any solution to this kind of problem?
My Computer
At a glance
Windows 7 Home Premium x64Phenom II x4 955G.Skill ripjaws 4x2Sapphire Radeon HD 6870
- Computer Manufacturer/Model Number
- My own build
- OS
- Windows 7 Home Premium x64
- CPU
- Phenom II x4 955
- Motherboard
- Asus M4A79XTD EVO
- Memory
- G.Skill ripjaws 4x2
- Graphics Card(s)
- Sapphire Radeon HD 6870
- Screen Resolution
- 1680x1050
- Hard Drives
- Western Digital 500gb 7200rpm
- PSU
- Thermaltake 775W
- Case
- Raidmax smilodon
- Cooling
- zalman something-or-other
- Keyboard
- Logitech G110
- Internet Speed
- ~8.4mbps
