Solved Win7 bosd 116-atikmpag.sys 6950

[pantelos]

Hello there guys newbie to your forums!
my problem..2 days ago was playing cod black ops 2 and my pc froze..crashed to desktop and then got bsod
while i was playing i was voice chatting on skype, had windows media player playing music and facebook at google chrome
after restart pc booted normally but after 10 mins got bsod again
that happend 2 more times..
then got to safe mode uninstalled drivers(13.1)booted in normal mode on 800x600 resolution installed catalyst control center 13.4, rebooted but after welcome screen my screen goes black and i can only restart my pc..
now it can boot in safe mode normally, if i try normal mode it only works without the drivers on 800x600 resolution..
what should i do?
tried : different versions of drivers..nothing
system restore before bsod..nothing
install only drivers..nothing
expand.exe command via cmd for atikmpag.sy_..still nothing
pc clean from viruses not any warning at all
no overclock done ever and all cables are ok..even my temps are good both on my 6950(aftermarket cooler) and on my cpu(same thing here)

 

[Arc]

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

[COLOR=Red]Windows 7 Kernel Version 7600 MP [/COLOR](4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532

Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

The BSOD is caused by the Logitech Webcam Driver.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a20fe769b0, 0, fffff88006867250, 5}

*** WARNING: Unable to verify timestamp for[URL="http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys"] lvuvc64.sys[/URL]
*** ERROR: Module load completed but symbols could not be loaded for [URL="http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys"]lvuvc64.sys[/URL]

Could not read faulting driver name
Probably caused by : [URL="http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys"]lvuvc64.sys [/URL]( lvuvc64+186250 )

Followup: MachineOwner
---------

And the driver is very old.

fffff880`066e1000 fffff880`06b83a80   lvuvc64  T (no symbols)           
    Loaded symbol image file: lvuvc64.sys
    Image path: \SystemRoot\system32\DRIVERS\lvuvc64.sys
[COLOR=Red]    Image name: lvuvc64.sys
    Timestamp:        Fri Aug 19 14:56:11 2011[/COLOR] (4E4E2C33)
    CheckSum:         004B3ED6
    ImageSize:        004A2A80
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update it from Logitech Support - Downloads, Manuals, FAQs & More

The display driver is old, too.

fffff880`040ce000 fffff880`0415b000   atikmpag   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Thu Dec 20 01:02:55 2012 (50D21667)
    CheckSum:         00095A98
    ImageSize:        0008D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update your ATI/AMD display driver.
You can get it from the link in our forum, http://www.sevenforums.com/graphic-...alyst-video-driver-windows-7-a.html#post17671, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.

During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

The zip does not contain any stop 0x116 BSOD; though it is a display related error. After updating the display driver. From the BIOS date, it is clear that it is a very old computer. Dismantle it, clean the inside carefully. Specially clean the air vents and fan grills. While re-seating, apply thermal paste to the CPU.


Your motherboard is very old, and dont have any windows 7 drivers listed. I guess the GPU is old, too? Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
At least 30% extra is safe.

Let us know when all are done.

 

[pantelos]

really thanks for the reply!
i just fixed the problem..i removed the extension power cord which must have caused the problem..i mean i had two of these Aquatuning - Der Wasserkühlung Vollsortimenter - mod/smart Kobra SS 6pin PCI-E Verlängerung - Aqua Blue - 20cm mod/smart Kobra SS 6pin PCI-E Verlängerung - Aqua Blue - 20cm 87419 which removed and now my vga's driver up to date and pc up and running again!
but why should i install a service pack?

p.s. my pc is not old at all check my system configuration at my profile

 

[Arc]

You should install the service pack and the other windows updates as otherwise the computer will remain vulnerableto all types of threats.

If you think that you have solved the issue,
mark this thread as solved by clicking the green

button.

System configuration is not needed, here is the related information:

BiosMajorRelease = 8
BiosMinorRelease = 12
BiosVendor = American Megatrends Inc.
BiosVersion = 0802   
[COLOR=Red]BiosReleaseDate = 12/10/2008[/COLOR]
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
[COLOR=Red]SystemFamily = To Be Filled By O.E.M.[/COLOR]
SystemVersion = System Version
[COLOR=Red]SystemSKU = To Be Filled By O.E.M.[/COLOR]
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = [URL="http://www.asus.com/Motherboards/P5E64_WS_Evolution/"]P5E64 WS EVOLUTION[/URL]
BaseBoardVersion = Rev 2.xx

Bios date goes to 2008, much earlier than windows 7 released. Motherboard does not have any driver for windows 7 listed, but still it is OEM No wonder you will not agree to install updates.

I guess you may not continue, but if you do, post a report following http://www.sevenforums.com/windows-...n-issue-posting-instructions.html#post1957831.

 

[pantelos]

thanks!