Solved windows 7 can't reconize with local network interface driver software

[caldom]

Hi again, as far as the if my Broadcom LAN Ethernet device is built into the motherboard or plugged into a PCI port...It looks like it built into the motherboard...either way the NIC comes with directions so it shouldn't be a problem I'm hoping.
Bob

 

[SlasherIT]

Don't worry, as long as you have a PCI port available on your motherboard... You should be fine.

 

[caldom]

HI, please don't laugh...how do I know that I do have a PCI port available on my motherboard...
Bob

 

[Barman58]

Old image but shows what to look for

 

[SlasherIT]

Thanks for the picture, that was useful and a good way to explain where to find the PCI port.

 

[caldom]

Hi, yes thank you for the pic, I'm going to refer to it when the NIC comes in.
Bob

 

[SlasherIT]

Ok caldom, reply back to this thread when you get your NIC.

 

[caldom]

HI! We are online!!!the NIC worked perfectly!!!! I was able to install it with the help of the pic posted which helped me know what to look for in my computer/motherboard. I can't thank you enough for all your incredible help here on the forum. I definitely could not have done it with out your wisdom.
Everyone I know has heard of this site and all the windows 7 wisdom found on it.
Thank you
Bob

 

[SlasherIT]

Hi Caldom,

I am really glad to have helped you solve your problem. Solving your problem made me happy too, so thanks .

If you get any other problems at all, just send me a PM or start a new thread. Best of luck with your computer in the future.

(Not trying to be rude, but if you don't mind, I would appreciate it if you would give me rep).

Thanks,
Slasher

 

[caldom]

HI, Of course I would definately do that. Is this were I rate a poster/thread of ? If so, execellent it is
If this is not it. than please do PM me and tell me how to give you a rep!
Bob

 

[SlasherIT]

To rep someone click the button in between of the negative and warning icon (top right corner of a post).

 

[SlasherIT]

Caldom? I can see your post on my email but I can't see your post on the thread. Strange...

 

[Barman58]

Moved here ....

http://www.sevenforums.com/hardware...ent-dead-randomly-after-fixing-nic-issue.html

 

[jfields]

Thanks SlasherIT for June 2011 Post

Thanks SlasherIT,

The June 2011 post for updating the driver was exactly what I needed.

I have a program I use to update drivers periodically, but on occasions it does not function for a driver.

 

[SlasherIT]

Awesome, but don't use programs that update your system drivers for you, they are not recommended and often get wrong drivers. Stick to getting 'em manually, from the manufacturer.

 

[debbiem]

Hiya

I had the same problem as Caldom, this morning came into my office, no internet, no network adaptors showing in the device manager.

I googled the problem and saw on some other forums that some folks had unplugged their network card and plugged it back in again and all was well.

After trying re-installing the driver per the windows 7 troubleshooter and getting the same message as Caldom about the Microsoft SNMP service not being detected, I came across this forum and read this thread.

In view of what I'd read on other forums about removing and re-installing the network cards, I removed the cover and found the same as Caldom, the network card attached directly to the motherboard, in one block along with a couple of USB ports.

I decided to try the vain attempt of tapping the block with a screwdriver (I had the pc laid on its side because I was too lazy to disconnect all the cables and remove it from under the desk!). After tapping the block I plugged the power in and switched it on and, as if by magic, I'm on the network again
Just thought I'd share this in case anyone else reads the thread and wants to give it a try before buying a new network card.

Debbie