Windows 7 Home Premium 64bit Installation Problems

[Hammeru]

I've seen a few posts similar to this one, but none of the fixes I found could solve my problem.

I built a computer recently and am held up by the windows 7 home premium 64bit installation.

My specs are as follows:

Intel Core i5 4670k
2x8gb kingston ddr3 2133mhz RAM
Corsair H100i CPU cooler
Xfx 750 W fully modular PSU
XFX double dissipation R9 290X
MSI ATX DDR3 2600 LGA 1150 Motherboard Z97 GUARD-PRO
Western Digital 7200rpm 1tb HDD

I am installing windows 7 home premium via a flash drive due to a lack of an optical drive.

I have gotten to various stages in the installation process, the furthest being the restart after copying windows files, expanding windows files, installing features, and installing updates. After the restart I see the option to open up my BIOS for a second, then the computer begins to load windows files. What follows is the windows 7 logo for a few moments, then the screen turns black, but is still on, and the computer is still running.

Initially assuming this was an amd driver issue, I removed the 290x which had been connected to my monitor via hdmi, and hooked up the monitor via VGA to my motherboards IO. I never got past the previous restart without the same problem.

I also often get stuck on the step: Copying Windows Files (0%)...
Whether or not the graphics card is installed.

If there is an apparent fix, it would be greatly appreciated.

 

[gregrocker]

Make sure you have written a fully intact ISO to stick from Steps 1 and 2 of Clean Reinstall - Factory OEM Windows 7.

Set HDD first to boot in BIOS setup, trigger stick using one-time BIOS Boot menu key, which may prevent the stick from starting after reboot. If not unplug it.

Let us know how this goes, then if necessary continue the steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums