Windows 7 update error 80070002

[TjaMat]

I booted in repair environment

 

[TjaMat]

Wondering if you had a look at what to do next

 

[NoelDP]

Sorry - been offline for much of the time since - back later!

 

[NoelDP]

I really think your only hope is a repair install if you have the media, or a clean install/factory recovery if not.

See here for the instructions for a repair install... http://www.sevenforums.com/tutorials/3413-repair-install.html?ltr=R

 

[TjaMat]

Thanks NoelDP

Now I have done a factory recorvery.
Ths sfc /scannow is working again. But it finds problems it can't resolve.

 

[NoelDP]

OK - please post a new set of WU files...

 

[TjaMat]

Alright here is the cbs.log file

 

[NoelDP]

Here's the problem...

	Line 79225: 2015-09-04 14:01:11, Info                  CSI    00000339 [SR] Repairing 1 components
	Line 79226: 2015-09-04 14:01:11, Info                  CSI    0000033a [SR] Beginning Verify and Repair transaction
	Line 79229: 2015-09-04 14:01:11, Info                  CSI    0000033c [SR] Cannot repair member file [l:16{8}]"img0.jpg" of Microsoft-Windows-Shell-Wallpaper-Windows, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

I'll post a fix protocol for it when I get a chance.

 

[NoelDP]

I've uploaded a file - tjmaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\tjmaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\tjmaa
or
DIR E:\tjmaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\tjmaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply