Windows Update cannot start after clone...

[strum101]

Anyone...

I did more than one clone. The same thing happens each time. Windows update cannot be started.
I tried Automatic Trouble Shooter twice. It failed. I really don't know what to do next.
I thought to try and download the Windows update Agent...haven't got that far. Frustration got the best of me.
I am using HP Pavilion...Windows 7 Home Premium 64 bit. The clone is the same size as the original hard drive...750GB.
The original hard drive is a Seagate 750GB...replacement drive is Western Digital 750GB. I also tried it with a 1TB Seagate...same thing happened. I wonder about this free Macrium now regarding clones.

I've come to the end of what to do. I still have the old Seagate 750GB hdrive if needed.
I will appreciate anyone's help with the solving of this problem. I am totally frustrating.
I hope not to discover more unseen or unknown problems later.

I did SFC file checker: "Windows Resource found corrupt files but was unable to fix some of them.
Refer to CBS.LOG"
Should I attach this file? Let me know.

I tried to download Windows Update Agent, but didn't know which one...several to choose from. I thought of the Auto & Manual update method. I like the ability to choose if the Automatic Update didn't work. I really don't know anything about this...not much knowledge with the inner workings of the computer.
I think I got this message while trying to download Windows Update Agent- "error: WU_E_SELFUPDATE_REQUIRED" So I don't know what to download r download first.

Ask me any questions for further insights...
With much appreciation for your help...sincerely...strum101

 

[NoelDP]

This may simply be caused by a bad set of Intel Rapid Storage Technology drivers -

Installing the Intel Rapid Storage Drivers
try downloading and installing them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

(you want the iata_enu.exe download)

Once complete, please reboot twice, then post an MGADiag report.


http://www.sevenforums.com/windows-updates-activation/234159-windows-genuine-activation-issue-posting-instructions.html

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

 

[strum101]

Brink...

Thanks for your reply...
1. I downloaded and installed iata_ENU.exe
2. I downloaded MGADiag from 7s forum
3. copied the report below...I am interested in your thoughts during this repair process. I don't know much about troubleshooting.
by the way...this afternoon Microsoft did an automatic update download & install & cleanup...I came across that when shutting down the computer.

I really appreciate your help...strum101

---------------------------
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-73CQT-WMF7J-3Q6C9
Windows Product Key Hash: KaFG+RmurcM3ZxzWyfEP9WtPUJw=
Windows Product ID: 00359-OEM-8992687-00010
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {9609EC7A-0D92-47EB-AE1C-29D0525FB0E0}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{9609EC7A-0D92-47EB-AE1C-29D0525FB0E0}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-3Q6C9</PKey><PID>00359-OEM-8992687-00010</PID><PIDType>2</PIDType><SID>S-1-5-21-3280680970-3114133263-420756485</SID><SYSTEM><Manufacturer>HP-Pavilion</Manufacturer><Model>NY705AA-ABA p6204y</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>5.43 </Version><SMBIOSVersion major="2" minor="5"/><Date>20090910000000.000000+000</Date></BIOS><HWID>A09E3707018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-CPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800010-02-1033-7600.0000-2812009
Installation ID: 022225269505103431662054041564977746388171207575428425
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 3Q6C9
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 11/19/2013 7:41:56 PM

Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 9:26:2013 19:07
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys


HWID Data-->
HWID Hash Current: KgAAAAEAAAABAAEAAQABAAAAAQABAAEAona0ssw/QNY26OJsCMq+akbK

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC HPQOEM SLIC-CPC
FACP HPQOEM SLIC-CPC
HPET HPQOEM SLIC-CPC
MCFG HPQOEM SLIC-CPC
OEMB HPQOEM SLIC-CPC
GSCI HPQOEM SLIC-CPC
SLIC HPQOEM SLIC-CPC
SSDT HPQOEM SLIC-CPC
------------------------------------------------

 

[NoelDP]

Assuming that the drivers installed properly, they obviously didn't fix the problem.


Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report.
Note that this may delete your Update History - but all updates will remain installed, and can be viewed in the Installed Updates listing.

 

[strum101]

Brink...
Before I do this last suggestion, I have a few questions...

I got a popup message "I'm not running genuine... etc" Microsoft/Windows "do I want to resolve now"
I then went to the Control Pane > System & Security > Action Center "Review recent messages & resolve problem" I'm to click "Check for Solutions"

I will do after your response to the above.

Now your request...what is "rebuild the database" I am not very good at understanding computer jargon.

with appreciation...strum101

 

[strum101]

Brink..
disregard my comment on "rebuild"
After reading the not "Genuine" note, I started to get nervous and misread your note.
But I still wait to get your thought on the "Genuine" note.
thanks again...strum101

 

[NoelDP]

(Noel, not Brink )
That's why I asked for the MGADiag report initially - it shows that you should be getting the non-genuine notification, because of critical errors causing all the file mismatches, which Windows interprets as an attack on the licensing system.

 

[strum101]

Brink...
I attempted to make a Restore Point.
It was shut down. I followed instructions to "configure"
Message said it was successful...but when I went to look at the restore point listed...red message again said not turned on, as before...strum101

 

[strum101]

Noel...
I apologize with the name mix up...
I'm getting nervous about all this...
strum101

 

[strum101]

Noel...
I did the command -

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

"Cryptographic Service service was stopped succeeepully"

REN c:\Windows\system32\Catroot 2 Catroot old
"The system cannot find the file specified"

c;\windows\system32>Net Start Cryptsuc
"The Cryptographic Services was started successfully"

You said to wait an hour to "rebuild"
Then do the, "MGADiag report"

I will be back in an hour then...around 12:30 EST
strum101...

 

[strum101]

C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
I got message "catroot 2" doesn't exist...
Sorry before I did not remove the REN
I did this next "is not recognized as an internal or external command and, operable program or batch."
I then the last command to restart as was at the beginning...
strum101..
I hope this is my last note until I hear from you...in appreciation...I entered each line one at a time.
I'M not that experienced using DOS.

 

[NoelDP]

Noel...
I apologize with the name mix up...
I'm getting nervous about all this...
strum101

No problem - I've been called a lot worse

Please read my command carefully you inserted an extra space! (Catroot2 is one word)

 

[strum101]

Noel..
I copy/paste: REN c;\Windows\System32\Catroot2 Catroot2Old
error message: "A duplicate filename exists, or the file cannot be found"

If I leave out the REN...the earlier error message as before.

when I cloned this drive I did a complete chkdsk...5 stages.
I did not do this with the 1TB Seagate.
I never received any "Genuine" error messages. I'm still using the original Seagate 750GB hdrive...3-4 years old HP Pavilion. Virus . Malware?...I ran MalwareBytes severaltimes and Microsoft Security Essentials and constantly updated. AI use SyncToy for my tons of documents. I found out about SyncToy here at 7s forum. I like it...easy & quick setup and run...just to change the subject.

I have the paid version of UASEUS Workstation...I should reinstall it and do the old hdrive a again.
I do have other backup quotations after this regarding clones & images...but all that can wait. I just appreciate your help.

 

[NoelDP]

In that case either the target exists, or the folder doesn't.
Please run the following commands and post the results.

DIR C:\Windows\System32\Catroot2
RD C:\Windows\System32Catroot2old /S


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

 

[strum101]

Noel...
when I opned DOS I got a request to go online regarding "Geniune" problem. I turned it down to do this.
Here are the results...not what you are looking for...I tried twice
---------------------------
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>DIR C:\Windows\Catroot2
Volume in drive C is HP
Volume Serial Number is BC35-06E8

Directory of C:\Windows

File Not Found

C:\Windows\system32>RD C:\Windows\Catroot2old /S
C:\Windows\Catroot2old, Are you sure (Y/N)? y
The system cannot find the file specified.

C:\Windows\system32>DIR C:\Windows\Catroot2
Volume in drive C is HP
Volume Serial Number is BC35-06E8
---------------------------------

 

[NoelDP]

You obviously have some corruption that is preventing the rebuild of the Catroot2 folder.
Your best bet is going to be a repair install...
http://www.sevenforums.com/tutorials/3413-repair-install.html?ltr=R

 

[strum101]

Noel...
Does the Windows Repair remove all the programs that I have installed myself?
Thanks...I appreciate your help, time and efforts in trying t give me a hand...strum101

 

[NoelDP]

Arepair install doesn't usually affect installed programs or data but will affect some settings. Read the tutorial

 

[strum101]

Noel...
I tried to find the correct download as given on the repair tutorial...did not understand or find Windows 7 USB - DVD Download Tool listed. Many choices many of which I did not understand. I followed the link to Microsoft TechNet...signed in. Maybe the names have changed since after the tutorial. I'd like to try this Repair I just don't know what to download.
I suppose I could still use your help...strum101

 

[NoelDP]

You have Windows 7 Home Premium x64 - so first you need to download the ISO for that from..
http://msft.digitalrivercontent.net/win/X17-58997.iso - assuming it's in English

(make a note - I'll be modifying the link after we know you've got the download OK, to keep within the forum rules)

You have a Pavilion p6204y - which presumably has a DVD writer in it?
If so, you don't need the USB tool - simply burn the downloaded ISO file to a writable DVD using the Windows Disk Image Burning tool - right-click on the downloaded file and select that, and follow the instructions.

Then disable your anti-virus and disconnect from the internet, and insert the DVD with Windows already running - shoul can pick up the instructions from then on with the tutorial, with any lu.ck