Windows 7 bsod after 60+ days then 2 in one day.

[ManyBeers]

What gives?
By the way I hibernate my computer every night if that matters.
Also the first recent bsod was yesterday and a Minidump was not created.

 

[Arc]

It appears to be a display related issue.

8ae9c184  9014a6f2Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
[COLOR=Red]*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys[/COLOR]
 nvlddmkm+0x1496f2

90001000 90af4000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
[COLOR=Red]    Image name: nvlddmkm.sys
    Timestamp:        Tue May 15 13:04:51 2012[/COLOR] (4FB2071B)
    CheckSum:         00ADD7B9
    ImageSize:        00AF3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Download and install NVIDIA DRIVERS 314.22WHQL .

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Also, is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .

 

[ManyBeers]

It appears to be a display related issue.

8ae9c184  9014a6f2Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
[COLOR=Red]*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys[/COLOR]
 nvlddmkm+0x1496f2

90001000 90af4000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
[COLOR=Red]    Image name: nvlddmkm.sys
    Timestamp:        Tue May 15 13:04:51 2012[/COLOR] (4FB2071B)
    CheckSum:         00ADD7B9
    ImageSize:        00AF3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Download and install NVIDIA DRIVERS 314.22WHQL .

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Also, is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .

Normal idle is 30-33c normal operating 45-50 because I daily have Windows Media Center running local
OTA tv shows which I listen to while browsing the web or doing whatever i might be doing.

I could only run furmark for 6 1/2 minutes before it hit my 94c(randomly selected)stop point. What
temp should I allow?

I didn't install the driver because I went through driver changing when this issue started around August 2012. That was with the onboard video a Geforce 6150 se. Before this time I had few if any bsods. So thinking maybe the onboard video was failing I went and bought the Pny gt 610 driver ver. 301.42
and i did not install Physx driver, the audio driver, the 3d vision driver , or the 3d vision controller
driver. I don't play any games so I didn't think that stuff was necessary. Anyways I still got bsods occasionally sometimes 2 weeks-1 month between them. So in November I reinstalled the card got
cleaned blew out the case and left the panel off the computer side. And it's been very solid until today.

Why do you recommend that driver? I guess I can try it but changing drivers hasn't helped in the past.

 

[Arc]

Why I recommend that driver?

Is not it obvious that I dont know your past? So if I have to continue troubleshooting, I have to see the situation as close as possible.

Cooperation or otherwise is on you. It is your computer, it is your issue.

 

[ManyBeers]

Why I recommend that driver?

Is not it obvious that I dont know your past? So if I have to continue troubleshooting, I have to see the situation as close as possible.

Cooperation or otherwise is on you. It is your computer, it is your issue.

Well last night I got another bsod and after restarting the computer it booted to a black screen with a blinking cursor I tried a couple more times, same result. Well after much playing around with both my drives;switching power cables, data cables, etc my main drive finally booted back up on it's original position. So I have definite issue with no.2 sata data position(the cable has two connectors). Anyways I did the best I could to anchor the cable so it can't move and I will wait and see. For now. Do you agree?