How do i get my SSD to work in my replacement laptop?

[skuzzzzy]

ok so i had a samsung laptop die, so i removed my SSD, sent laptop back recieved the replacement.
i put my SSD in the laptop but it will not read my SSD at all, it just goes straight to bios.
same laptop so everything should work since the drivers will be for the same hardware..

I hooked up my SSD as a external to another pc which reads it fine so SSD is fine, not sure why it wont boot with the SSD? or read it.

SAMSUNG Series 3 NP350V5C-T02US
SAMSUNG 840 Series MZ-7TD250BW 2.5" 250GB SATA III Internal Solid State Drive (SSD)

 

[bigmck]

ok so i had a samsung laptop die, so i removed my SSD, sent laptop back recieved the replacement.
i put my SSD in the laptop but it will not read my SSD at all, it just goes straight to bios.
same laptop so everything should work since the drivers will be for the same hardware..

I hooked up my SSD as a external to another pc which reads it fine so SSD is fine, not sure why it wont boot with the SSD? or read it.

SAMSUNG Series 3 NP350V5C-T02US
SAMSUNG 840 Series MZ-7TD250BW 2.5" 250GB SATA III Internal Solid State Drive (SSD)

You didn't boot the other PC I am guessing. = The SSD has different drivers than is required in the replacement PC. This tutorial should get your PC going again. http://www.sevenforums.com/tutorials/135077-windows-7-installation-transfer-new-computer.html

 

[skuzzzzy]

ok so i had a samsung laptop die, so i removed my SSD, sent laptop back recieved the replacement.
i put my SSD in the laptop but it will not read my SSD at all, it just goes straight to bios.
same laptop so everything should work since the drivers will be for the same hardware..

I hooked up my SSD as a external to another pc which reads it fine so SSD is fine, not sure why it wont boot with the SSD? or read it.

SAMSUNG Series 3 NP350V5C-T02US
SAMSUNG 840 Series MZ-7TD250BW 2.5" 250GB SATA III Internal Solid State Drive (SSD)

You didn't boot the other PC I am guessing. = The SSD has different drivers than is required in the replacement PC. This tutorial should get your PC going again. http://www.sevenforums.com/tutorials/135077-windows-7-installation-transfer-new-computer.html

the replacement pc is the exact same model as the pc it replace therefore all the hardware is fine, other pc's motherboard died, was never a issue with the SSD

 

[Sardonicus]

In the Bios, did you check the boot device setting? It should be set to HDD.

 

[bigmck]

the replacement pc is the exact same model as the pc it replace therefore all the hardware is fine, other pc's motherboard died, was never a issue with the SSD

If everything were exactly the same, there would be no problem.

 

[skuzzzzy]

In the Bios, did you check the boot device?

ive tried but its not reading the SSD.
SSD is read fine as a external on a different pc and the original HDD that came with the broken laptop works fine on the new laptop

 

[Sardonicus]

Try removing the SSD and putting it back in.

 

[skuzzzzy]

the replacement pc is the exact same model as the pc it replace therefore all the hardware is fine, other pc's motherboard died, was never a issue with the SSD

If everything were exactly the same, there would be no problem.

it is the same exact model laptop, its instant boot to bios, it does not read the SSD, not a driver conflict.

Try removing the SSD and putting it back in.

ive tried that, could there be any other setting i could be missing in bios?

 

[Sardonicus]

It looks like you have a UEFI Boot Support setting, try changing it.

 

[skuzzzzy]

It looks like you have a UEFI Boot Support setting, try changing it.

View attachment 312405

thanks ill try it when i get home