homegroup problem

[bjproc]

i tried to connect to a homegroup, with a win 7 HP to a win 7 pro, but it says it can't connect as it needs ipv6 :huh:

whats the point in it at all then, as i believe most folk have ipv4

 

[RogerR]

Homegroup is only between Win7 machines. IPv6 is included in Win7 but in some instances requires a registry hack to fully enable. There are threads here detailing this particular fix.

Here is one.

 

[bjproc]

thanks rodger, i'll have a read of that

the 2 pc that i want to homegroup have win 7

 

[chev65]

If the registry fix doesn't do anything than most likely you have a problem with your router. A firmware update may fix it, I can also check the compatiblity with Windows 7 if you give me the exact model number and version number. That registry hack is only attempting to make up for not using a Windows 7 compatible router. It's a work around at best.

 

[bjproc]

thanks chev65, the router i use is a netgear DG834GT, i'm on sky broadband (UK) and they have their own firmware for the router, not netgears, not upgradeable unless sky do it themself, part of there T&C. there away to put their prices up, so i'm just about to move over to O2 BB, so i'll try again after that

 

[WalkerA WinTeam]

thanks chev65, the router i use is a netgear DG834GT, i'm on sky broadband (UK) and they have their own firmware for the router, not netgears, not upgradeable unless sky do it themself, part of there T&C. there away to put their prices up, so i'm just about to move over to O2 BB, so i'll try again after that

Hi bjproc,

I'm sure chev65 will be back soon but I took the liberty of running your router model - it's not listed at the Windows 7 Compatibility Center. What's the model of your network adapter? Is it built-in, or a USB stick?

Also, here's a thread from a few weeks ago in which someone's having problems with their Netgear DG834GT as well: http://www.sevenforums.com/drivers/42684-netgear-router-dg834gt-windows-7-driver.html

Cheers,

Walker
Windows Outreach Team

 

[RedBirdDad]

One thing I'd like to bring up is if the PC's are *ethernet* connected to the router vs wireless, then the driver issue is moot. There wouldn't be one for the router. The router isn't going to know anything about IPV6 anyway so any IPV6 packets would be ignored by it. You could throw *any* IPV4 based router in there and it wouldn't make a difference. Wireless is a different story of course.

WalkerA has a good point: The ethernet NIC could be an issue and drivers are common problem.

One tip that I learned that has worked on almost every version of Windows when IP acts really weird is to uninstall the adapter and reboot. This causes Windows to "re-discover" the adapter a reinstall the driver and create new registry settings. This may not be it, but I'll throw it out for consideration...

 

[bjproc]

thanks chev65, the router i use is a netgear DG834GT, i'm on sky broadband (UK) and they have their own firmware for the router, not netgears, not upgradeable unless sky do it themself, part of there T&C. there away to put their prices up, so i'm just about to move over to O2 BB, so i'll try again after that

Hi bjproc,

I'm sure chev65 will be back soon but I took the liberty of running your router model - it's not listed at the Windows 7 Compatibility Center. What's the model of your network adapter? Is it built-in, or a USB stick?

Also, here's a thread from a few weeks ago in which someone's having problems with their Netgear DG834GT as well: http://www.sevenforums.com/drivers/42684-netgear-router-dg834gt-windows-7-driver.html

Cheers,

Walker
Windows Outreach Team

One thing I'd like to bring up is if the PC's are *ethernet* connected to the router vs wireless, then the driver issue is moot. There wouldn't be one for the router. The router isn't going to know anything about IPV6 anyway so any IPV6 packets would be ignored by it. You could throw *any* IPV4 based router in there and it wouldn't make a difference. Wireless is a different story of course.

WalkerA has a good point: The ethernet NIC could be an issue and drivers are common problem.

One tip that I learned that has worked on almost every version of Windows when IP acts really weird is to uninstall the adapter and reboot. This causes Windows to "re-discover" the adapter a reinstall the driver and create new registry settings. This may not be it, but I'll throw it out for consideration...

i've disabled my wireless cards, and the router is connected with ethernet cables (a 25' one trailing through the house just now, maybe get it put under the floor tomorrow )

it's still not having this homegroup problem


the hard wire has fixed my streaming problems

 

[RedBirdDad]

Sounds like a wireless adapter issue. If you can provide the details on the adapter that would be a great start.

 

[WalkerA WinTeam]

i've disabled my wireless cards, and the router is connected with ethernet cables (a 25' one trailing through the house just now, maybe get it put under the floor tomorrow )

it's still not having this homegroup problem


the hard wire has fixed my streaming problems

Well I'm glad your network is at least working now! Although running ethernet cable under the floorboards sounds like an inconvenient/expensive solution :shock:

Let us know if there's anything else we can do...

Cheers,

Walker
Windows Outreach Team

 

[bjproc]

Sounds like a wireless adapter issue. If you can provide the details on the adapter that would be a great start.

main PC, win 7 pro

asus p5ne-sli M/B, onboard ethernet


HTPC, win 7 home premium

asus M4A78-VM M/B
ASUS M4A78-VM 780G Socket AM2+ HDMI DVI VGA 8 Channel Audio MATX Motherboard - Ebuyer

wireless card, ZyXEL ZyAIR G-302 v3 PCI Adapter (now disabled and working through the onboard ethernet port)

ZyXEL ZyAIR G-302 v3 PCI Adapter - Ebuyer

 

[bjproc]

i've disabled my wireless cards, and the router is connected with ethernet cables (a 25' one trailing through the house just now, maybe get it put under the floor tomorrow )

it's still not having this homegroup problem


the hard wire has fixed my streaming problems

Well I'm glad your network is at least working now! Although running ethernet cable under the floorboards sounds like an inconvenient/expensive solution :shock:

Let us know if there's anything else we can do...

Cheers,

Walker
Windows Outreach Team

i'm a joiner to trade, so running a cable through my house is not that big a job, just a wee bit time consuming

 

[RedBirdDad]

I just looked at Zyxel's website and it says the G302v3 will have Windows7 support in Feb of 2010:

Windows 7 Support

Good Luck!

 

[bjproc]

I just looked at Zyxel's website and it says the G302v3 will have Windows7 support in Feb of 2010:

Windows 7 Support

Good Luck!

i did see that, but if it's disabled and running with a long ethernet cable, this should fix this issue and isolate the wireless, should it not?

 

[RedBirdDad]

Yep. It will.

In general I prefer desktops be wired and laptops wireless. It's just my personal preference. Running a little CAT5 cable isn't that hard for me. My house is pretty cable friendly on the 1st floor anyway and the kids use their laptops upstairs wireless.

 

[bjproc]

cheers.




just to say, thanks to all who have replied to me trying to sort this out