Hi - I removed the DVD drive and installed a 2nd SSD and now when I boot a screen quickly flashes up about RAID configuration. The PC goes on to start up and work perfectly (including now having the 2nd SSD as drive D:\
So the RAID config pop up is only a very small inconvenience but i wonder if there a way to get rid off this, since I'm not using and have never used RAID.
While the RAID screen is quickly displaying you can hit Ctl-I and pull up some info and it says that RAID is disabled for both the C:\ and new D:\ drives.
I went into the BIOS set up and went to the SATA operation options and get this;
INTEL Rapid storage technology Option ROM 11.2.21527
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Option
3. Reset Disks to Non-Raid 6. Exit
# 3 "Reset Disks to Non Raid" seems tempting but obviously don't want to screw up my Win7 installation (and other files)...
Also from the BIOS SATA set up page it allows me to change the radio button which is set to RAID and change it to Disabled, ATA or AHCI - setting it to Disabled stops the PC from booting and trying either ATA or AHCI Windows starts to try to boot but after some seconds I get a quick BSOD and the PC starts to try booting again...
Hope some one can give me some direction on if and how I can stop that RID screen from popping up during boot - and make sure I have everything config'd properly now that i have the 2nd SSD installed.
Many thanks and best regards.
So the RAID config pop up is only a very small inconvenience but i wonder if there a way to get rid off this, since I'm not using and have never used RAID.
While the RAID screen is quickly displaying you can hit Ctl-I and pull up some info and it says that RAID is disabled for both the C:\ and new D:\ drives.
I went into the BIOS set up and went to the SATA operation options and get this;
INTEL Rapid storage technology Option ROM 11.2.21527
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Option
3. Reset Disks to Non-Raid 6. Exit
# 3 "Reset Disks to Non Raid" seems tempting but obviously don't want to screw up my Win7 installation (and other files)...
Also from the BIOS SATA set up page it allows me to change the radio button which is set to RAID and change it to Disabled, ATA or AHCI - setting it to Disabled stops the PC from booting and trying either ATA or AHCI Windows starts to try to boot but after some seconds I get a quick BSOD and the PC starts to try booting again...
Hope some one can give me some direction on if and how I can stop that RID screen from popping up during boot - and make sure I have everything config'd properly now that i have the 2nd SSD installed.
Many thanks and best regards.
My Computer
- Computer type
- Laptop
- Computer Manufacturer/Model Number
- Dell
- OS
- Win 7 Pro