Solved Adobe spec's show no graphics card installed

[Britton30]

The driver for this Multi Media card would be either AverMedia or Yuan, it's not an Intel component. I'm sure it would do no harm to take it out and uninstall the driver for the item I showed earlier.

Check for a latch on the end of its slot, like PCIex16 slots have.

 

[ThrashZone]

I hate to ask you've been very kind already,
These graphics cards might as well be listed in Greek for all I understand,
All I do think I know is the last card I posted looked like the size would fit on this machine,
Can you see if you can find a 1 gig card closer to my power spec's or anything I could use,
I will not hold you responsible at all
Cheers.
View attachment 301479

 

[ThrashZone]

Well this is the one I ended up ordering,
With all of the advice given, I think
ASUS GT610-SL-1GD3-L GeForce GT 610 1GB 64-bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Ready Video Card - Newegg.com

 

[Britton30]

That card should work fine Mike. From what I found on the ASUS site it should max out at 75W (~7Amps) so your PSU should run it. I say should run it.

This video Arc posted before should help out. Of course you case is going to be a lot different, but the motherboard slot, PCIex16 will be the same, make sure the latch closes when you insert the card in. It is a fairly precise fit, make sure the slot in the card where the pins are lines up with the same spot in the slot.
The first card this guy puts in is one like you'll have, low profile. You will of course use NVidia drivers, not AMD.

 

[ThrashZone]

Thanks for the response,
Should know by the end of the week if everything works well or not
Cheers.

 

[ThrashZone]

So far so good,
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121771
Here's my new wei-wei
http://www.sevenforums.com/performance-maintenance/275710-show-us-your-wei-4-a-128.html#post2660741
Not sure what this is,
Or if it's good/ bad or ugly ?
View attachment 302109

 

[Britton30]

I saw the new WEI. That is some monitoring and overclocking software, I don't know anything about it though. You can ask in the Overclock forums though. Paul and Solarstartshines, Tummy are the best I think. That is a small GPU so it won't take to much overclocking.

This would be a good place to start, http://www.sevenforums.com/benchmarks/223272-show-us-your-unigine-heaven-benchmark-scores.html

 

[ThrashZone]

Which download is it ?
View attachment 302112

 

[Britton30]

They are all the same. If you have a torrent client it would be faster, otherwise any of the other 3.

 

[ThrashZone]

I quit when I saw 87 degrees,
How long is that supposed to run ?
Seemed like forever I quite after about 5+ minutes.

 

[Britton30]

Check in the Unigine thread, they know all about that stuff. I can only recommend and advise on them.
The GPU should be good up too 100C
If you run where it says "Bench mark" It take 3.4 minutes I think.

 

[ThrashZone]

Yea I chickened out I didn't want to fry anything.
But it ran way longer that what you posted it just seemed to repeat over and over again without me knowing how long it would last ?
Video quality looked pretty good,
Thanks,
Cheers.

 

[Britton30]

It sounds like you were letting it run. After the video starts, in the upper LEFT is the benchmark button. It will run through each scene once and give a score. Use all default settings.

 

[ThrashZone]

Photoshop 3d works and that's all I care about,
Thanks for all your help brother,
Cheers.
View attachment 302116

 

[Britton30]

That's good news Mike. I pointed you to the Unigine thread only for advice, you didn't need to run the benchmark. I should have said that.

 

[ThrashZone]

It's all good Gary,
That is a very cool test awesome visuals going on,
Cheers.

 

[Britton30]

Cool, not needed but if you want to check out more: Benchmarks - Windows 7 Help Forums

 

[ThrashZone]

Thanks,
I did the extreme test and posted a new benchmark on my last post,
Cheers.