Solved After clearing the bin the PC runs slow

[Hellbinder]

Hi,
I hope you can help me, after clearing the recycle bin the PC runs slow, and 5 minutes after the start a blackscreen apears that says: "boot0: error" how can i fix this?

PS: sorry for the bad English

 

[whs]

Is this a Mac system ?

 

[Hellbinder]

No it´s Windows 7 Ultimate 32 bit

 

[whs]

I would try a http://www.sevenforums.com/tutorials/681-startup-repair.html

 

[Hellbinder]

sounds good, but this would presuppose that you have the Installation Disc, which I don´t have.

 

[whs]

No problem. Get one from Here. Make sure you get 7 Ultimate 32bit (x86).

 

[Hellbinder]

ok, I´ll burn and run it tomorrow

 

[whs]

Where in Austria are you. We spent a lot of vacations in Velden.

 

[Hellbinder]

In Upperaustria in Urfar-Umgebung,
now back to topic: I´ve run the Startup repair 5 times by now, and it still doesn´t work
the startup repair sais in the details:
Session details:
System Disc = \Device\Harddisk0
Windows directory =
AutoChk Run = 0
Number of root causes = 1

Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Root cause found:
The partition table does not have a valid System Partition.

Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
Time taken = 7347 ms


so what should i do now? by the way the "C:" drive is located on a SSD and the "D:" drive is located on a HDD.

 

[Kaktussoft]

In recovery environment->command prompt:

diskpart
list  volume

What is the drive letter there of your win7 C drive? Assume it's called P there.

dir  P:\users

you see the user accounts?

chkdsk/f  P:

Replace P by real disk letter. What letter is it?

chkdsk/f  C:

yes do C now.

Errors found? Errors repaired? Try the commands again to prove it has corrected the disk errors.

 

[Kaktussoft]

In Upperaustria in Urfar-Umgebung,
now back to topic: I´ve run the Startup repair 5 times by now, and it still doesn´t work
the startup repair sais in the details:
Session details:
System Disc = \Device\Harddisk0
Windows directory =
AutoChk Run = 0
Number of root causes = 1

Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms


Test Performed:
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Root cause found:
The partition table does not have a valid System Partition.

Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
Time taken = 7347 ms


so what should i do now? by the way the "C:" drive is located on a SSD and the "D:" drive is located on a HDD.

status 0x0 means....succesfull.
So only problem is: The partition table does not have a valid System Partition
But:
Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
Time taken = 7347 ms

So it has been fixed. startup Repair doesn't give that error anymore?

 

[Hellbinder]

Root cause found:
The partition table does not have a valid System Partition.

Repair action: Partition table repair
Result: Completed successfully. Error code = 0x0
Time taken = 7347 ms

showed up by every startup repair

by the guide from Kaktussoft i onely came up to the point "list volume"

there it lists:

Volume 0 G DVD-ROM 0 B Kein Medium
Volume 1 H DVD-ROM 0 B Kein Medium
Volume 2 C NTFS Partition 698 GB Fehlerfrei
Volume 3 E NTFS Partition 698 GB Fehlerfrei
Volume 4 D System_reset NTFS Partiton 100 MB Fehlerfrei
Volume 5 F NTFS Partition 107 GB Fehlerfrei


but when I write " dir F:\users " it onely lists the main comands of CMD

 

[Kaktussoft]

chkdsk/f c:
chkdsk/f d:
chkdsk/f e:
chkdsk/f f:

dir c:\users
dir d:\users
dir e:\users
dir f:\users

where is your account?

 

[Hellbinder]

it should be Volume 5, because the ssd has 120 GB and the HDD should be Volume 2 and 3 because it has 1,5 TB

i´ve tried with

]

dir c:\users
dir d:\users
dir e:\users
dir f:\users

but there onely the main commands for CMD showed up

 

[Hellbinder]

I also tried it with " dir c:\Benutzer" with all Volumes but it didn´t work

 

[Kaktussoft]

Try:

dir   f:\

Be sure to be in command prompt and not in diskpart or any other program! it must work. If not working... post a camshot of the command and error

 

[Kaktussoft]

In command prompt:

diskpart
select  disk  0
detail  disk
select  disk  1
detail  disk
exit

Which volumes are on disk 0?
Which volumes are on disk 1?
I want to know the drive letters.

 

[Hellbinder]

Oh.... so it didn't work because I was still in Diskpart?
Then I'll try it in about 2 hours when I'm back at home.

 

[Hellbinder]

Disk 0:

Datenträger- ID: "B1196BBE"
Typ = "ATA"
Status = "Online"
Pfad = "1"
Ziel = "1"
LUN-ID = "0"
Speicherortpfad = "PCIROOT<0>#PCI<1F02>#ATA<C01T01L00>"
Aktueller schreibgeschützter Zustand = Nein
Schreibgeschützt = Nein
Startdatenträger = Nein
Auslagerungsdatei-Datenträger = Nein
Ruhezustandsdatei-Datenträger = Nein
Absturzabbild-Datenträger = Nein
Clusterdatenträger = Nein

Volume 2 C NTFS Partition 698 GB Fehlerfrei
Volume 3 E NTFS Partition 698 GB Fehlerfrei


Disk 1:

Datenträger- ID: "047F7559"
Typ = "ATA"
Status = "Online"
Pfad = "0"
Ziel = "1"
LUN-ID = "0"
Speicherortpfad = "PCIROOT<0>#PCI<1F02>#ATA<C00T01L00>"
Aktueller schreibgeschützter Zustand = Nein
Schreibgeschützt = Nein
Startdatenträger = Nein
Auslagerungsdatei-Datenträger = Nein
Ruhezustandsdatei-Datenträger = Nein
Absturzabbild-Datenträger = Nein
Clusterdatenträger = Nein

Volume 4 D System-reset NTFS Partition 100 MB Fehlerfrei
Volume 5 F NTFS Partition 107 GB Fehlerfrei

 

[Kaktussoft]

diskpart
select  volume  c
detail partition
select  volume  d
detail partition
select  volume  e
detail partition
select  volume  f
detail partition
exit

Which volume has ACTIVE=yes? Maybe more than one btw.