Solved Brand New Baremetal Install BSOD

[dr3amw3av3r]

Hello all,

After closing my previous thread I went ahead and nuked my hard drive and did a full Win 7 Install from scratch. After that here are the things that I did...

1. Installed all windows updates
2. Used Driverpack 13 to install up to date drivers for all hardware onboard
3. Installed and configured all programs that I use
4. Did Win update again

I then started using the machine as per normal and then BANG!! BSOD.....

So I have collected all the necessary files and am linking them below, including the Memory.DMP file.

Thank you so much for reading this post and taking out the time from your busy lives to help me out! I really appreciate it

Please let me know if you need any further information.

Files:
Memory.DMP = https://www.dropbox.com/s/6ipqotcecaerz1u/MEMORY.DMP
SF Diag Tool File = https://www.dropbox.com/s/w9y6mme4t7ck5uc/Dr3amW3av3r.zip

Regards,
Dr3amW3av3r.

 

[essenbe]

dr3amw3av3r, unfortunately what you are experiencing is very difficult to find the cause. This may give you some indications.

What you're looking for will be in one of the following categories:

a) BIOS bug (you have the latest BIOS version installed)
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)

If you are overclocking anything, please set everything to default levels If you don't already have it, please doenload and instsll CPUz (CPU-Z CPUID - System & hardware benchmark, monitoring, reporting ) and post screenshots (please post in this manner http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html ) of the CPU, mainboard, Memory and SPD tabs. The SPD dim slots can be chosen from the dropdown box in the top left. I just need the ones populared with ram. Also, please go to Control Panel (category view) > add remove programs and post screenshots of all installed programs.

Thanks

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88002f65180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.
Debugging Details:

 

[dr3amw3av3r]

Hi It appears that this BSOD was a once off occurrence as it hasn't happened since. I will now close off this thread.

Thank you so much for your help!

 

[essenbe]

You're quite welcome, glad we could help. If you have any more problems, you can post right here.