Solved bridging ADSL modem router and another modem router

vjgeorge87

New member
Local time
9:25 AM
Messages
5
hi,

I need help on bridging Belkin N150 F9J1001V1 modem router (primary, connected to internet using ADSL) and Linksys WAG54GS modem router (which needs to be bridged). I would appreciate if detailed step by step procedure is provided.
 

My Computer My Computer

At a glance

windows 7 x64
OS
windows 7 x64
can you explain exactly what you want to do ?
and give IP address, of each router
 

My Computer My Computer

At a glance

windows 7 pro 64 bit
OS
windows 7 pro 64 bit
can you explain exactly what you want to do ?
and give IP address, of each router
 

My Computer My Computer

At a glance

windows 7 pro 64 bit
OS
windows 7 pro 64 bit
Purpose: to increase the wi-fi range in my house

Primary router ip: 192.168.2.1
Secondary router ip: 192.168.1.1
 

My Computer My Computer

At a glance

windows 7 x64
OS
windows 7 x64
The best way is to buy an ADSL wireless router and run a cable to the WAN port.
most people will not like to do such thing as it is a pain.

There are two other hardware that can do the JOB. that I tried from experience and work well.

A) the best way to go buy with "NETGEAR WN2000RPT Universal WiFi Range Wireless Network Extender 802.11B/G/N"
you can find it on the net, its very easy to configure just plug it to the electricity and point out the router you want to it to Extend the signal. high recommend.


B) 2nd one is using your power line to transfer the Ethernet connection, I don't remember the model but we use it for our cables.

but go with option A much better.
 

My Computer My Computer

At a glance

windows 7 pro 64 bit
OS
windows 7 pro 64 bit
Hmmm.. I got your point.. thanks for replying.. my point over here is to cut cables
 

My Computer My Computer

At a glance

windows 7 x64
OS
windows 7 x64
If you want a wireless A/P don't use one of the combo modem/routers as it most likely will not work right because you would be installing an internet gateway into the middle of your LAN. You certainly don't need two modem's in a basic LAN. There might be a way to make it work but the required settings would be different depending on the hardware being used. In any event you only want one DHCP server in a single network.

You would be better served going with a standard access point plugged into the LAN port of the router or a switch which would be set up in the optimal location to work as an A/P.

Those wireless WiFi range extenders might save you from having to run so much wire but they don't work as well as a wireless A/P plugged into a LAN port.
 

My Computer My Computer

At a glance

Windows 7 Ult, Windows 8.1 Pro,Q9650-4.275GHz, E8600 4.5GHz, E6750-3.8GHzG.Skill PC2 9600 1200Mhz 5 5 5 15 2TGTX480
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Home built
OS
Windows 7 Ult, Windows 8.1 Pro,
CPU
Q9650-4.275GHz, E8600 4.5GHz, E6750-3.8GHz
Motherboard
Evga 780i FTW
Memory
G.Skill PC2 9600 1200Mhz 5 5 5 15 2T
Graphics Card(s)
GTX480
Sound Card
Asus Xonar D2
Monitor(s) Displays
HannsG
Screen Resolution
1680X1050
Hard Drives
GSkill Phoenix Pro 120GB SSD
PSU
ThermalTake Toughpower 1000Watt modular
Case
ThermalTake XaserV
Cooling
Xigmatek S1283
Keyboard
Logitech G15
Mouse
Logitech G9
Internet Speed
T1
The netegar WN2000RPT modem is excellent, compare to the other I used in many clients house.

as it is not a "repeater" it is connecting Wireless to your main router ( As a client).
then makes its own signal.

This is excellent equipment for home,
 

My Computer My Computer

At a glance

windows 7 pro 64 bit
OS
windows 7 pro 64 bit
Back
Top