BSOD after afew hrs...

[mitc69]

gettin the following errors after afew hrs on
it a build, so im having problem to find out where the error is, far i know 124 is a m/b, ram or cpu problem but likewise i could be wrong or i might have a defect somewhere... any help would be great

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800DDF8028
BCP3: 00000000BF800000
BCP4: 0000000000200401
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

 

[Arc]

Hi mitc69.

Stress test the Graphics Card using Furmark.

Video Card - Stress Test with Furmark
​

Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

Stress test the CPU.

Hardware - Stress Test With Prime95
​

It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Test your RAM modules for possible errors.

How to Test and Diagnose RAM Issues with Memtest86+
​

Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.

eXtreme Power Supply Calculator - The only power supply calculator trusted by PSU manufacturers and computer enthusiasts
​

Also let us know the wattage of the installed PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .
________________________________________________

BugCheck 116, {fffffa8012eed010, fffff88005c005d4, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1405d4 )

Followup: MachineOwner
---------

BugCheck 124, {0, fffffa800ddee028, bf800000, 200401}

Probably caused by : GenuineIntel

Followup: MachineOwner
---------