BSOD after any install

[kc87]

I installed some additional RAM and since then have had regular crashes. I tried removing the additional memory but still got the crashes so reinstated it.
It appears to me that the crashes happen when I try to start up after a (successful) install of any program. I ran all checks/tests after crash - all passed. Every time a roll back to previous system image works to get it going again. Any ideas? Thanks

 

[Thedoctor44]

Right, installing incompatible memory can cause lots of problems.

Please run memtest86 by following these instructions to test for bad RAM as you have memory management bugchecks.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run it for at least 8 passes to determine whether the RAM is faulty or not

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff80003cbd4ac, 0, ffffffffffffffff}

[COLOR="Red"]Probably caused by : memory_corruption[/COLOR] ( nt!MiUpdateWsleHash+13c )

Followup: MachineOwner

Before changing any drivers can you please create a restore point. If you don't know how then follow these instructions.

http://www.sevenforums.com/tutorials/697-system-restore-point-create.html

It looks like a monitor filter driver is causing issues. Can you please update the driver from this link.

Mozy Support Main Home Page

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {c08a5, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\MOBK.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for [COLOR="red"]MOBK.sys[/COLOR]
*** ERROR: Module load completed but symbols could not be loaded for [COLOR="red"]MOBK.sys[/COLOR]
[COLOR="red"]Probably caused by : Ntfs.sys[/COLOR] ( Ntfs!NtfsPagingFileIo+155 )

If and only if these don't fix your problems then please enable Driver Verifier.

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html