BSOD after booting

[katonoszta]

Hi guys

i have BSOD problem with my PC, so basically i turned on the pc and goes normal, but after around 40 minutes my PC freezing, then i decided to restart, after succesful booting BSOD appear. it was so fast that i can't take a picture of it.

i had used the dm collector but it seems cannot collect the dump files, what should i do guys? thank you So much

 

[Golden]

Check in C:\Windows\Minidump - are there any .dmp files there?

 

[katonoszta]

I had checked many times, and there are no .dmp files. Thanks for replying

 

[Golden]

Follow this first to create minidumps:
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

Now follow this:

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
http://www.sevenforums.com/tutorials/697-system-restore-point-create.html

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
http://www.sevenforums.com/tutorials/69585-safe-mode.html

 

[katonoszta]

Thank you, i'll try it

 

[katonoszta]

So after waiting for few hours finally the BSOD appears, but when i try to restart my PC the monitor just goes black and nothing happened even after few minutes, i try to unpluged the cables many times and turned on the pc but still nothing happened. Is this problem related to my PC hardware(s)?.I currently using my Notebook instead of my PC. This picture of BSOD is the only information that i can currently provide, and i hope the minidump file(s) are still there.

Thank You

 

[katonoszta]

Yeah finally i get the dump file, i also add preview from BSOD viewer

 

[Golden]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff8800a16a9d8, fffff8800a16a230, fffff88001291dde}

Probably caused by : memory_corruption

Followup: memory_corruption
---------

Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[katonoszta]

Thank You so much for replying

I'll contact you again if i find something

 

[Golden]

 

[katonoszta]

Hi i come back

So after several hours using memtest with 8 consecutive passes, error not found. My ram is 8 GB (single stick) so i'm just testing it once. What sould i do next?

Thank You

 

[Arc]

OK, now enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable
​

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

 

[katonoszta]

Hi thanks for replying. But I had done that (driver verifier) earlier, so i have to do it again?

 

[Golden]

Yes, try it again.