BSOD after startup and loading my programs (Did a system restore)

[AnnaB]

I've been experiencing new BSOD since my new installation of Windows 7 after replacing a counterfeit copy with a legit from Microsoft. (I previously posted in the forums) I thought a real copy and fresh install would solve the problems and It has not.

I'm having new BSOD and I have attached the requested ZIP file. I left the pc on all day with no issues and Now when I load World of Warcraft/Overwatch I've had issues since. Even loading Teamspeak and Chrome it used to BSOD also.

I would love help before the 29th so I don't have to upgrade to Windows 10 Unless it absolutely necessary.

Somehow I posted this thread twice. I apologize. I think refreshing my page was a bad idea. Marked it solved to prevent double postings.

 

[AnnaB]

BSOD after startup and loading my programs (Did a fresh install)

I've been experiencing new BSOD since my new installation of Windows 7 after replacing a counterfeit copy with a legit from Microsoft. (I previously posted in the forums) I thought a real copy and fresh install would solve the problems and It has not.

I'm having new BSOD and I have attached the requested ZIP file. I left the pc on all day with no issues and Now when I load World of Warcraft/Overwatch I've had issues since. Even loading Teamspeak and Chrome it used to BSOD also.

I would love help before the 29th so I don't have to upgrade to Windows 10 Unless it absolutely necessary.

 

[axe0]

Please revert back all overclocking while troubleshooting, for CPU, GPU, RAM as a first troubleshooting step.

 

[AnnaB]

I'm not overclocking anything right now. Just fresh installed 2 days ago. Personally as a tech level, This is my first build and I don't know how to even overclock at all yet.

 

[axe0]

Your memory is running at a frequency of 2133MHz, per the specs of the memory is this the tested speed (usually due to XMP enabled)
The SPD speed is 1600MHz, which is the speed without XMP enabled
Sniper - F3-2133C10D-8GSR - G.SKILL DDR3 Memory

[Memory Device (Type 17) - Length 40 - Handle 0046h]
  Physical Memory Array Handle  0042h
  Memory Error Info Handle      [Not Provided]
  Total Width                   64 bits
  Data Width                    64 bits
  Size                          8192MB
  Form Factor                   09h - DIMM
  Device Set                    [None]
  Device Locator                ChannelB-DIMM1
  Bank Locator                  BANK 3
  Memory Type                   18h - Specification Reserved
  Type Detail                   0080h - Synchronous
  Speed                         [COLOR="Red"]2133MHz[/COLOR]
  Manufacturer                  0420
  Serial Number                         
  Asset Tag Number                        
  Part Number                   F3-2133C10-8GSR

 

[AnnaB]

How do I return it back to 1600Mhz? I don't remember setting this. Sorry my tech level is VERY beginner. You're actually teaching me more right now than anyone else has told me since this has been happening in the beginning.

What is XMP Enabled and what is SPD speed?

EDIT:

Here are my Mobo settings:

DRAM FrequencyY: [Auto] (Assuming its a 2133 MHz like you said) <<< Should I change this to 1600MHz?
Adjusted DRAM Frequency: [ 1333MHz] (This part is grey out and not editable)
X.M.P: [Disabled]
DRAM Timing: [Auto]

 

[axe0]

XMP is the overclocking for the memory, SPD speed is the default speed of the memory.

Could you make a screenshot/photo if the settings and post it.

 

[AnnaB]

I keep getting
The www.sevenforums.com page isn’t working

www.sevenforums.com is currently unable to handle this request.
HTTP ERROR 500

So here's a Onedrive link to the screenshot.

https://1drv.ms/i/s!AmB3xSQ51UQ6hF6a64SEYsJwJHTd

 

[axe0]

Really odd, the BIOS says the frequency is at 1333MHz.

Could you load the optimal default settings please, it resets the settings to the best configuration for the current hardware.
You can do this by pressing the F6 key.

 

[AnnaB]

Im currently at work and will do what you recommend and then take a fresh screenshot for you. Will post around 9-10 PST

 

[AnnaB]

Two new screenshots after the F6 defaults.
Also attached a new zip
https://1drv.ms/i/s!AmB3xSQ51UQ6hF892XVoxqinnz2p

https://1drv.ms/i/s!AmB3xSQ51UQ6hGDrwtJ55WEpxp_d

 

[axe0]

Which should I believe? Both are from the same time where 1 is way too high.

 

[AnnaB]

Both are same screen shot, but the menu is scrolled down? (Showed you the whole list of Overclocking section)
Since I changed some setting with the F6 reset that my info might be different and linking a NEW zip would help pin-point possible problems.

Edit: I thought pressing f6 would reset everything to default. It also indicated that it did and I saved settings and restarted my system?

Should I just manually adjust my DRAM Frequency to 1600Mhz?

 

[axe0]

I didn't look properly, the one that is 'too high' is the CPU

Since I changed some setting with the F6 reset that my info might be different and linking a NEW zip would help pin-point possible problems.

The information you're referring to is only in the dumps and since you haven't had another crash there isn't a difference.

 

[AnnaB]

Would it show my Memory at 2133Mhz still?

 

[AnnaB]

Should I just manually adjust my DRAM Frequency to 1600Mhz?

This question also!

 

[axe0]

I mentioned that there isn't a difference with the dumps, the dumps contain data from crashes you already had, I showed what it says.

 

[AnnaB]

I mentioned that there isn't a difference with the dumps, the dumps contain data from crashes you already had, I showed what it says.

Now I understand what you're saying. Sorry, its late here.

 

[axe0]

Should I just manually adjust my DRAM Frequency to 1600Mhz?

You could try it yes, looking at the specs of your CPU, RAM & motherboard it would be best to have the DRAM frequency at 1600MHz.

 

[AnnaB]

Should I just manually adjust my DRAM Frequency to 1600Mhz?

You could try it yes, looking at the specs of your CPU, RAM & motherboard it would be best to have the DRAM frequency at 1600MHz.

Thank you! I will do this and post when a BSOD happens. *Fingers crossed it doesn't happen!!*