BSOD After Upgrafing RAM from 2 x2gb to 2x 4gb.

[Blessed Spartan]

BSOD After Upgrading RAM from 2 x2gb to 2x 4gb.

Hello, i recently purchased 8Gb of Corsair Vengeance RAM ( CMZ8GX3M2A1600C9). upon installing this ram in the correct Dimm slots ( 1 and 3) I have been getting BSOD. this can happen once i load up the computer after it guess past the login screen. However after changing the BIOS from the previous setting to manual for example from auto, it works fine and will do so until the next time i reboot my pc.
Here is an attachment of the crashes.

Hope someone knows how to help me

 

[Arc]

Welcome aboard.

Trusteer Rapport is one of the main reasons of failure here.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffffffffffffff8b, 0, fffff88001d89137, 0}

*** WARNING: Unable to verify timestamp for RapportCerberus64_43926.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus64_43926.sys

Could not read faulting driver name
Probably caused by : RapportCerberus64_43926.sys ( RapportCerberus64_43926+17137 )

Followup: MachineOwner
---------

And

fffff880`0938d630  fffff880`04b6ff78Unable to load image \??\C:\ProgramData\Trusteer\Rapport\store\exts\RapportCerberus\43926\RapportCerberus64_43926.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RapportCerberus64_43926.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportCerberus64_43926.sys
 RapportCerberus64_43926+0xf78

And, the program is very recently installed. If possible, get rid of it, it is making the system crash prone.

Another thing, Kaspersky.

*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
 klif+0x3801c

As it is failing, uninstall it. Uninstall Kaspersky using Kaspersky Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download and install those, and then run full system scans with both of them, one by one.

Free up the startup. Nothing more is needed there other than the antivirus, MSC in the changed situation.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept the restart.

Let us know the results.

 

[Blessed Spartan]

Thank you for the response, i was worried id been over looked . Ill try this now and get back to you tommorw. happy new year

 

[Pauly]

Seeing as you had new ram might be worth running an overnight memtest to verify the new stuff just as a precaution
http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

 

[Blessed Spartan]

Did as You said, and the computer no longer allows me to load past the login screen. i was instead introduced to another error, here you go. Ive run mem test and it came up with no errors, i got the ram for christmas so i doubt its the ram itself also. I'm really not sure what to do

 

[Pauly]

Did as you said?
Do you mean msconfig that archie was talking about if so enter via safe mode and undo any changes although there should be nothing in the startup tab that will make system unbootable

 

[Blessed Spartan]

i just had to switch back to my old ram to run the system. I got blue screen 3 times, the first just after the BIOS startup option display, and the 2nd/3rd being after i had logged in to windows.I meant both sorry should have specified. Ive run mem test, but i hadn't run it for 7 passes. Ill try again tonight

 

[Britton30]

Yes, A RAM error sometimes will show only after 5-6 passes. Follow the tutorial carefully. Don't try to use both new and old RAM together. Make sure the new is supported in your board, that is, the type and frequency.

Verify your BIOS has the correct DRAM settings, it may still be on the old settings.

View attachment 247908

 

[Blessed Spartan]

how will i be able to verify these settings, everything is set to Auto on my Bios settings, ive lpooked at the timings, they seem to be parralle. Ive used SIW, and CPUZ SIW says the wrong values are detected under the memory section, but does not specify. ill try the test nbow. Thank you for your support

 

[Britton30]

You'll need to switch RAM parameters to manual to see where the BIOS has them. RAM is likely running a 11-11-11-32 at 1333MHz or possibly 1066MHz.

 

[Arc]

Did as You said, and the computer no longer allows me to load past the login screen. i was instead introduced to another error, here you go. Ive run mem test and it came up with no errors, i got the ram for christmas so i doubt its the ram itself also. I'm really not sure what to do

What is the situation right now?
Is it booting now? Or is it still sticking at logon screen? Follow it:
Troubleshooting Windows 7 Failure to Start
Or, run Startup Repair for three separate times, with restarts after every single run.
Startup Repair: Run three separate times.

Memtest should be run overnight, for at least 8 passes. you must to run it, as suggested.

If there are further crashes, let us see the dumps.

 

[Blessed Spartan]

Update guys, ive run mem test again for 7 passes, and there were no errors, the computer now loads after setting everything to Manuel however im still waiting to see if there will be BSOD. this usually happens after the computer is left off for a certain amount of time ( 15mins+) I have to work but once i reboot the system ill let you know. again thank you for the support

 

[Britton30]

Sure, let us know what happens.

 

[Blessed Spartan]

Hi guys and happy new year!! Got home after after church to see if my pc was working and it came up after the load screen with another blue screen, however, it went to bios, chose to discard changes and exit and its working fine again i rly don't understand what the issue is, this is really stressful because i need it for My 3D modeling assignment but here's my dumps.

Edit: Also in case its still not clear what i mean this page shows my issue in detail although it was not resolved
http://www.tomshardware.co.uk/forum/268289-12-possible-blue-screen-errors

 

[Pauly]

No new dump files here, these are all over a month old ?

 

[mmkarimi]

Update guys, ive run mem test again for 7 passes, and there were no errors, the computer now loads after setting everything to Manuel however im still waiting to see if there will be BSOD. this usually happens after the computer is left off for a certain amount of time ( 15mins+) I have to work but once i reboot the system ill let you know. again thank you for the support

check your screen saver or power manager, as you say it happens after 15+min in idle situation. maybe its the problem with your computer sleeping.
also check for the graphic card driver update

 

[Blessed Spartan]

No new dump files here, these are all over a month old ?

Thats really odd i used the SF diagnostic tool to collect from the latest dump. if it happens a again ill show you

on an update, i found an issue where my bios would sometimes set to manual after it crashed. assuming that it was supposet to be on thouse settings i left it on Manual went into the timing and changed them, however i found that my bios would automatically change them back to auto starting on 5-5-5-11 insted of 9-9-9-24. i changed them using the + and - signs instead of typing the numbers in myself this time. and Windows Experience has auto changed my Ram rating from 7.5- 7.6 the next time i turn it off which should be in an hour. ill leave it off and then get back to you and let you know if the timings were the actual problem. Again thank you for your support

 

[Blessed Spartan]

Update guys, ive run mem test again for 7 passes, and there were no errors, the computer now loads after setting everything to Manuel however im still waiting to see if there will be BSOD. this usually happens after the computer is left off for a certain amount of time ( 15mins+) I have to work but once i reboot the system ill let you know. again thank you for the support

check your screen saver or power manager, as you say it happens after 15+min in idle situation. maybe its the problem with your computer sleeping.
also check for the graphic card driver update

How do i check my power manager?

 

[mmkarimi]

Update guys, ive run mem test again for 7 passes, and there were no errors, the computer now loads after setting everything to Manuel however im still waiting to see if there will be BSOD. this usually happens after the computer is left off for a certain amount of time ( 15mins+) I have to work but once i reboot the system ill let you know. again thank you for the support

check your screen saver or power manager, as you say it happens after 15+min in idle situation. maybe its the problem with your computer sleeping.
also check for the graphic card driver update

How do i check my power manager?

to check your system of sleep problem, check it manually by sleep your computer and see what happens.
to change your power plan check this directory:
Control Panel\All Control Panel Items\Power Options\Edit Plan Settings

 

[Blessed Spartan]

now that u mention it sometimes my pc would refuse to sleep ill see if that helps, btu wen i meant off, i meant Shutdown and left off for over that period of time. I had another crash after leaving it and i got a blue screen however the dumps are not picking up on the latest ones only last months. I may just take the ram back