BSOD bugcheck code: 0x124

[Funda]

Hello guys,

So I've been getting this BSOD for a while now. I've researched, ran every type of program to test my hardware out, and at the end they all seem to say that everything is fine. I had a stock heat sink for the CPU and I changed it to a water cooled one. The BSOD usually happen at random times, doesn't matter what I'm doing it BSOD's. At this point I'm clueless and pretty frustrated to what could be wrong.

When I try to run Checksur(Because sfc/scannow found corrupted files) it usually BSOD after like a minute of running it, that's everytime. Normally the computer will last a good time without BSOD. But usually it occurs when trying to update windows.

I'll attatch the dump files for you guys to look at.

I hope you guys can help me out figuring out what's wrong.

 

[Laith]

Hey there!

BugCheck 124, {0, fffffa800a4c6028, bf800000, 124}

Probably caused by : GenuineIntel

Run Prime95, if the temps goes too high stop the test. www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

 

[Funda]

Alright, I'll run it and get back to you.

 

[Laith]

Okay.

 

[Funda]

Hello Laith,

So I've run Prime95 for about 15 minutes. I stopped it because the temperatures got up to 90C. I figured that's way too high. But it didn't give me any errors throughout those 15 minutes.

[Sep 5 09:44] Worker starting
[Sep 5 09:44] Setting affinity to run worker on logical CPU #4
[Sep 5 09:44] Beginning a continuous self-test to check your computer.
[Sep 5 09:44] Please read stress.txt. Choose Test/Stop to end this test.
[Sep 5 09:44] Test 1, 1800000 Lucas-Lehmer iterations of M250519 using FMA3 FFT length 12K, Pass1=256, Pass2=48.
[Sep 5 09:45] Test 2, 1800000 Lucas-Lehmer iterations of M245759 using FMA3 FFT length 12K, Pass1=256, Pass2=48.
[Sep 5 09:46] Test 3, 1800000 Lucas-Lehmer iterations of M245281 using FMA3 FFT length 12K, Pass1=256, Pass2=48.
[Sep 5 09:47] Test 4, 1800000 Lucas-Lehmer iterations of M243713 using FMA3 FFT length 12K, Pass1=256, Pass2=48.
[Sep 5 09:48] Test 5, 1800000 Lucas-Lehmer iterations of M235519 using FMA3 FFT length 12K, Pass1=256, Pass2=48.
[Sep 5 09:49] Self-test 12K passed!
[Sep 5 09:49] Test 1, 3200000 Lucas-Lehmer iterations of M172031 using FMA3 FFT length 8K, Pass1=128, Pass2=64.
[Sep 5 09:50] Test 2, 3200000 Lucas-Lehmer iterations of M163839 using FMA3 FFT length 8K, Pass1=128, Pass2=64.
[Sep 5 09:51] Test 3, 3200000 Lucas-Lehmer iterations of M159745 using FMA3 FFT length 8K, Pass1=128, Pass2=64.
[Sep 5 09:53] Test 4, 3200000 Lucas-Lehmer iterations of M157695 using FMA3 FFT length 8K, Pass1=128, Pass2=64.
[Sep 5 09:54] Self-test 8K passed!
[Sep 5 09:54] Test 1, 1400000 Lucas-Lehmer iterations of M315393 using FMA3 FFT length 15K, Pass1=320, Pass2=48.
[Sep 5 09:55] Test 2, 1400000 Lucas-Lehmer iterations of M311295 using FMA3 FFT length 15K, Pass1=320, Pass2=48.
[Sep 5 09:56] Test 3, 1400000 Lucas-Lehmer iterations of M308295 using FMA3 FFT length 15K, Pass1=320, Pass2=48.
[Sep 5 09:57] Test 4, 1400000 Lucas-Lehmer iterations of M307201 using FMA3 FFT length 15K, Pass1=320, Pass2=48.
[Sep 5 09:58] Test 5, 1500000 Lucas-Lehmer iterations of M291913 using FMA3 FFT length 15K, Pass1=320, Pass2=48.
[Sep 5 09:59] Self-test 15K passed!
[Sep 5 09:59] Test 1, 2200000 Lucas-Lehmer iterations of M212991 using FMA3 FFT length 10K, Pass1=128, Pass2=80.
[Sep 5 10:00] Torture Test completed 14 tests in 16 minutes - 0 errors, 0 warnings.
[Sep 5 10:00] Worker stopped.

I also ran memtest86+ for 8 passes, and no errors at all.

 

[Laith]

Hmm, this might be a bad cooler. Replace your CPU cooler.

 

[Funda]

I did! I used to have the stock intel cooler, and like 2 weeks ago I bought a Corsair H55. At idle it or when Im just using chrome it doesnt go above the 40's. When I'm gaming it doesn't go that high either.

My computer still crashes regardless of the cpu temp.

 

[Laith]

Hmm, get it RMA:ed.

 

[Funda]

Are you sure that's what's causing the BSOD?

 

[Laith]

I'm 50% certain.